Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Beauty of Joseon Dynasty Cream Versus Hada Labo Premium Whitening Water Cream

Beauty of Joseon Dynasty Cream Versus Hada Labo Premium Whitening Water Cream This barrier-repair moisturizer is formulated around Panax Ginseng Root Water and Niacinamide to strengthen the skin barrier. This brightening moisturizer is formulated around Niacin

Beauty of Joseon Dynasty Cream Versus Hada Labo Premium Whitening Water Cream

This barrier-repair moisturizer is formulated around Panax Ginseng Root Water and Niacinamide to strengthen the skin barrier.

This brightening moisturizer is formulated around Niacinamide and Alpha-Arbutin to fade the look of dark spots and brighten dull-looking skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Oryza Sativa Bran Water

Glycerin

Panax Ginseng Root Water

Hydrogenated Polydecene

1,2-Hexanediol

Niacinamide

Squalane

Butylene Glycol

Propanediol

Propylene Glycol Dicaprylate/Dicaprate

Cetearyl Olivate

Sorbitan Olivate

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Xanthan Gum

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Tromethamine

Carthamus Tinctorius Seed Oil

Hydrogenated Coconut Oil

Glyceryl Acrylate/Acrylic Acid Copolymer

Ethylhexylglycerin

Adenosine

Caprylic/Capric Triglyceride

Disodium EDTA

Hyaluronic Acid

Hydrolyzed Hyaluronic Acid

Sodium Hyaluronate

Honey Extract

Ceramide NP

Hydrogenated Lecithin

Coptis Japonica Root Extract

Raphanus Sativus Seed Extract

Lycium Chinense Fruit Extract

Theobroma Cacao Seed Extract

Phellinus Linteus Extract

Dextrin

Scutellaria Baicalensis Root Extract

Water, Oryza Sativa Bran Water, Glycerin, Panax Ginseng Root Water, Hydrogenated Polydecene, 1,2-Hexanediol, Niacinamide, Squalane, Butylene Glycol, Propanediol, Propylene Glycol Dicaprylate/Dicaprate, Cetearyl Olivate, Sorbitan Olivate, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Xanthan Gum, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Tromethamine, Carthamus Tinctorius Seed Oil, Hydrogenated Coconut Oil, Glyceryl Acrylate/Acrylic Acid Copolymer, Ethylhexylglycerin, Adenosine, Caprylic/Capric Triglyceride, Disodium EDTA, Hyaluronic Acid, Hydrolyzed Hyaluronic Acid, Sodium Hyaluronate, Honey Extract, Ceramide NP, Hydrogenated Lecithin, Coptis Japonica Root Extract, Raphanus Sativus Seed Extract, Lycium Chinense Fruit Extract, Theobroma Cacao Seed Extract, Phellinus Linteus Extract, Dextrin, Scutellaria Baicalensis Root Extract

Methylpropanediol

Cyclopentasiloxane

Dimethicone

Hydrogenated Polyisobutene

Cetyl Ethylhexanoate

Cetyl Alcohol

Pentylene Glycol

Myristyl Stearate

Polysorbate 60

PEG-100 Stearate

Hydroxyacetophenone

Glyceryl Stearate

Dimethicone Crosspolymer

Cetyl PEG/PPG-10/1 Dimethicone

Alpha-Arbutin

Sodium Polyacrylate

Inonotus Obliquus Extract

Bifida Ferment Lysate

Aminomethyl Propanol

Saccharide Isomerate

Ethylhexyl Stearate

Theobroma Grandiflorum Seed Butter

3-O-Ethyl Ascorbic Acid

Glycine Max Seed Extract

Trideceth-6

Trehalose

Opuntia Streptacantha Stem Extract

Biosaccharide Gum-1

Yeast Polysaccharides

Tapioca Starch

Hydrolyzed Sodium Hyaluronate

Sodium Citrate

Citric Acid

Sodium Metabisulfite

Water, Methylpropanediol, Cyclopentasiloxane, Dimethicone, Hydrogenated Polyisobutene, Glycerin, Niacinamide, Cetyl Ethylhexanoate, Cetyl Alcohol, Pentylene Glycol, Myristyl Stearate, Polysorbate 60, PEG-100 Stearate, Hydroxyacetophenone, Glyceryl Stearate, Dimethicone Crosspolymer, Cetyl PEG/PPG-10/1 Dimethicone, Butylene Glycol, Alpha-Arbutin, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Sodium Polyacrylate, Inonotus Obliquus Extract, Bifida Ferment Lysate, Aminomethyl Propanol, Saccharide Isomerate, Ethylhexyl Stearate, Xanthan Gum, Theobroma Grandiflorum Seed Butter, 3-O-Ethyl Ascorbic Acid, Glycine Max Seed Extract, Trideceth-6, Disodium EDTA, Trehalose, Opuntia Streptacantha Stem Extract, Biosaccharide Gum-1, Yeast Polysaccharides, Tapioca Starch, 1,2-Hexanediol, Sodium Hyaluronate, Hydrolyzed Sodium Hyaluronate, Sodium Citrate, Citric Acid, Sodium Metabisulfite

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.

It is a:

Humectant, drawing moisture into the skin

Emollient, helping to soften skin

Solvent, dispersing and stabilizing formulas

Preservative booster, enhancing the antimicrobial activity of other preservatives

Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic polymer. It is used to thicken, emulsify, and improve the texture of products.

As an emulsifier, it helps stabilize oil-in-water emulsions to give products an elegant feel when applied.

It can also form a thin protective film on skin. One study found that a formula using this polymer helped slow down how quickly other ingredients (like DEET) were absorbed through skin.

A 2024 study of over 1,300 patients confirmed that sensitization to this ingredient is rare. It is also non-mutagenic and has a clean track record.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.

This ingredient mainly works behind the scenes and helps with:

On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.

One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).

Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.

You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Niacinamide is a multitasking form of vitamin B3 that strengthens the skin barrier, reduces pores and dark spots, regulates oil, and improves signs of aging.

And the best part? It's gentle and well-tolerated by most skin types, including sensitive and reactive skin.

You might have heard of "niacin flush", or the reddening of skin that causes itchiness. Niacinamide has not been found to cause this.

In very rare cases, some individuals may not be able to tolerate niacinamide at all or experience an allergic reaction to it.

If you are experiencing flaking, irritation, and dryness with this ingredient, be sure to double check all your products as this ingredient can be found in all categories of skincare.

When incorporating niacinamide into your routine, look out for concentration amounts. Typically, 5% niacinamide provides benefits such as fading dark spots. However, if you have sensitive skin, it is better to begin with a smaller concentration.

When you apply niacinamide to your skin, your body converts it into nicotinamide adenine dinucleotide (NAD). NAD is an essential coenzyme that is already found in your cells as "fuel" and powers countless biological processes.

In your skin, NAD helps repair cell damage, produce new healthy cells, support collagen production, strengthen the skin barrier, and fight environmental stressors (like UV and pollution).

Our natural NAD levels start to decline with age, leading to slower skin repair, visible aging, and a weaker skin barrier. By providing your skin niacinamide, you're recharging your skin's NAD levels. This leads to stronger, healthier, and younger looking skin.

Another name for vitamin B3 is nicotinamide. This vitamin is water-soluble and our bodies don't store it. We obtain Vitamin B3 from either food or skincare. Meat, fish, wheat, yeast, and leafy greens contain vitamin B3.

The type of niacinamide used in skincare is synthetically created.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.
  4. 04Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.
  5. 05In practice, that translates to a long shelf life and a consistently elegant skin feel.
  6. 06While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.
  7. 07Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.
  8. 08This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.
  9. 09This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures…
  10. 10Cetyl Ethylhexanoate is an emollient ester. It comes from cetearyl alcohol and 2-ethylhexanoic acid.
  11. 11Cetyl Ethylhexanoate is an emollient that adds a velvety feel to skin without being greasy or oily. Emollients help trap moisture into your skin, keeping your skin soft and hydrated.
  12. 12PEG-20 Glyceryl Triisostearate is a synthetic, oil-loving helper ingredient that does two jobs:
  13. 13This ingredient is made by joining three building blocks: PEG, Isostearic Acid and glycerin. The PEG gives it the oil-and-water blending power.
  14. 14This ingredient has been found safe for use in cosmetics and broader PEG family testing shows minimal irritation/sensitization. The molecule's large size also means it isn't expected to penetrate skin to any meaningful degree.
  15. 15Fungal acne note: This ingredient may not be fungal acne safe due to isostearic acid (C18). Isostearic acid falls into the C11-24 range that Malassezia can feed on.
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side