Beauty of Joseon Ginseng Moist Sun Serum SPF 50+ PA++++ Versus Skin Aqua UV Tinted Based SPF50

Beauty of Joseon Ginseng Moist Sun Serum SPF 50+ PA++++ Versus Skin Aqua UV Tinted Based SPF50

This chemical sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.

This hybrid sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Butylene Glycol

Dibutyl Adipate

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

Alcohol

Acrylates Copolymer

Butyloctyl Salicylate

C12-15 Alkyl Benzoate

Ethylhexyl Triazone

Phenethyl Benzoate

Arbutin

1,2-Hexanediol

Silica

Methylpropanediol

Isoamyl P-Methoxycinnamate

Polysilicone-15

Polymethylsilsesquioxane

Panax Ginseng Root Extract

Pentylene Glycol

Dibutyl Ethylhexanoyl Glutamide

Dibutyl Lauroyl Glutamide

C30-45 Alkyldimethylsilyl Polypropylsilsesquioxane

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Sodium Acrylates Crosspolymer-2

Sodium Polyacryloyldimethyl Taurate

Ethyl Hexanediol

Hydroxyacetophenone

Panax Ginseng Berry Extract

Panax Ginseng Extract

Panax Ginseng Leaf/Stem Extract

Adenosine

Xanthan Gum

Disodium EDTA

Ethylhexylglycerin

Glycerin

Tocopherol

Water, Butylene Glycol, Dibutyl Adipate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Alcohol, Acrylates Copolymer, Butyloctyl Salicylate, C12-15 Alkyl Benzoate, Ethylhexyl Triazone, Phenethyl Benzoate, Arbutin, 1,2-Hexanediol, Silica, Methylpropanediol, Isoamyl P-Methoxycinnamate, Polysilicone-15, Polymethylsilsesquioxane, Panax Ginseng Root Extract, Pentylene Glycol, Dibutyl Ethylhexanoyl Glutamide, Dibutyl Lauroyl Glutamide, C30-45 Alkyldimethylsilyl Polypropylsilsesquioxane, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Sodium Acrylates Crosspolymer-2, Sodium Polyacryloyldimethyl Taurate, Ethyl Hexanediol, Hydroxyacetophenone, Panax Ginseng Berry Extract, Panax Ginseng Extract, Panax Ginseng Leaf/Stem Extract, Adenosine, Xanthan Gum, Disodium EDTA, Ethylhexylglycerin, Glycerin, Tocopherol

Ethylhexyl Methoxycinnamate

Cyclopentasiloxane

Talc

Isododecane

Zinc Oxide

Titanium Dioxide

Ethylhexyl Salicylate

Isononyl Isononanoate

Lauryl PEG-10 Tris(Trimethylsiloxy)Silylethyl Dimethicone

Polymethyl Methacrylate

Trimethylsiloxysilicate

CI 77163

Ethylhexyl Hydroxystearate

Triethoxycaprylylsilane

Stearic Acid

Aluminum Hydroxide

Diisostearyl Malate

CI 77492

Dimethicone

Tocopheryl Acetate

Methylparaben

Acrylates Crosspolymer

Parfum

CI 77891

PEG/PPG-18/18 Dimethicone

CI 77491

Sodium Hyaluronate

Caprylic/Capric Triglyceride

CI 15850

PPG-3 Benzyl Ether Myristate

Juglans Regia Seed Extract

Magnesium Ascorbyl Phosphate

Ectoin

Laminaria Ochroleuca Extract

Phenoxyethanol

Sodium Metabisulfite

Water, Ethylhexyl Methoxycinnamate, Cyclopentasiloxane, Talc, Isododecane, Alcohol, Zinc Oxide, Titanium Dioxide, Ethylhexyl Salicylate, Isononyl Isononanoate, Glycerin, Lauryl PEG-10 Tris(Trimethylsiloxy)Silylethyl Dimethicone, Polymethyl Methacrylate, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Trimethylsiloxysilicate, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, CI 77163, Ethylhexyl Hydroxystearate, Triethoxycaprylylsilane, Stearic Acid, Aluminum Hydroxide, Diisostearyl Malate, CI 77492, Dimethicone, Tocopheryl Acetate, Polymethylsilsesquioxane, Methylparaben, Disodium EDTA, Acrylates Crosspolymer, Parfum, CI 77891, PEG/PPG-18/18 Dimethicone, CI 77491, Sodium Hyaluronate, Caprylic/Capric Triglyceride, CI 15850, PPG-3 Benzyl Ether Myristate, Juglans Regia Seed Extract, Magnesium Ascorbyl Phosphate, Ectoin, Laminaria Ochroleuca Extract, Phenoxyethanol, Sodium Metabisulfite

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

This ingredient is also called ethanol or ethyl alcohol. It is denatured, meaning made undrinkable for cosmetic use.

In formulas, it:

Is it bad for your skin?

The answer comes down to concentration. Patch and wash studies have found highly concentrated alcohol-based hand rubs (60-100%) cause less barrier disruption than washing with a basic detergent like SLS. The only measurable effect in these studies was a temporary dip in skin hydration.

Concentrations below 12-15% in leave-on cosmetics is generally well-tolerated. Concentrations above start to see increased transepidermal water loss (TEWL) and reduced hydration.

In concentrations about 58%, it creates temporary channels in your skin's lipid layers to become more permeable and allow other ingredients to slip through easily.

This ingredient can be up to 80% of the formula in alcohol-based perfumes.

Overall, this ingredient is probably harmless if found lower down an ingredients list but worth side-eyeing if it's high up (especially if your barrier is already struggling).

Alcohol can worsen dry skin, eczema, and oily skin, especially at higher concentrations. This is because it can increase transepidermal water loss and decrease hydration to disrupt the skin barrier.

According to the National Rosacea Society based in the US, you should be mindful of products with these alcohols in the top half of ingredients.

True allergic contact dermatitis to ethanol is uncommon, but be sure to patch test if you have dry or sensitive skin.

This ingredient is better known as bemotrizinol or Tinosorb S and is one of the best broad-spectrum UV filters in modern sunscreen.

It works by absorbing UV light across a whole range (280-400 nm) with peaks around 310 nm (UVB) and 340-345 nm (UVA). This means it covers UVB plus the deeper UVA wavelengths that drive photoaging and pigmentation.

Another pro?

It's exceptionally photostable, barely degrades in sunlight, and acts as a "bodyguard" for less stable filters.

That's why you'll see it paired with avobenzone or octinoxate; this team up ensures they keep working through sun exposure.

Safety reviews have been reassuring across the board. This ingredient shows low absorption through the skin, rarely irritates, and lab studies found it doesn't act like a hormone in the body (a concern that's been raised about some older sunscreen filters).

On maximum concentrations:

In 2026, the US F.D.A finally added it as an OTC sunscreen ingredient at concentrations up to 6% for adults / children 6 months and older

Diethylamino Hydroxybenzoyl Hexyl Benzoate (DHHB) is a chemical UV-A absorber. It is formulated for high UVA protection (320-400 nm).

DHHB is well-liked for:

DHHB has been approved by the EU, Japan, Taiwan, and South America for use up to 10%. Unfortunately, it has not been approved for use in the US or Canada due to slow regulatory processes.

This ingredient is soluble in oils, fats, and lipids.

Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.

This ingredient mainly works behind the scenes and helps with:

On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.

One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).

Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.

You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Polymethylsilsesquioxane is a silicone used as a film forming agent.

When applied to the skin, this ingredient creates an invisible film on the surface. This film still allows oxygen to pass through, but prevents moisture from escaping. This can help condition and hydrate the skin. It also leaves a silky feel when applied.

Polymethylsilsesquioxane has not been shown to clog pores. It has been deemed safe to use up to 55%, but most cosmetics use much less.

If you have concerns about using this ingredient, we recommend speaking with a professional.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons