Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Beauty of Joseon Red Bean Water Gel Versus innisfree Dewy Glow Moisturizer with Cherry Blossom & Niacinamide

Beauty of Joseon Red Bean Water Gel Versus innisfree Dewy Glow Moisturizer with Cherry Blossom & Niacinamide This calming moisturizer is formulated around Panthenol and Allantoin to calm redness and hydrate skin. This brightening moisturizer is formulated arou

Beauty of Joseon Red Bean Water Gel Versus innisfree Dewy Glow Moisturizer with Cherry Blossom & Niacinamide

This calming moisturizer is formulated around Panthenol and Allantoin to calm redness and hydrate skin.

This brightening moisturizer is formulated around Niacinamide to brighten dull-looking skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Butylene Glycol

Glycerin

1,2-Hexanediol

Methyl Trimethicone

Phaseolus Angularis Seed Extract

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Tromethamine

Glyceryl Glucoside

C12-14 Alketh-12

Maltodextrin

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Dimethicone/Vinyl Dimethicone Crosspolymer

Dimethicone Crosspolymer

Ethylhexylglycerin

Betaine

Panthenol

Allantoin

Dipotassium Glycyrrhizate

Polyquaternium-51

Xanthan Gum

Disodium EDTA

Glyceryl Acrylate/Acrylic Acid Copolymer

Dioscorea Japonica Root Extract

Glucose

Sodium Citrate

Beta-Glucan

Hydrolyzed Corn Starch

Citric Acid

Sucrose

Magnesium Ascorbyl Phosphate

Caprylyl Glycol

Helianthus Annuus Seed Oil

Tocopherol

Cyanocobalamin

Glycine

Serine

Glutamic Acid

Aspartic Acid

Leucine

Acetyl Hexapeptide-8

Alanine

Lysine

Arginine

Tyrosine

Phenylalanine

Proline

Threonine

Valine

Isoleucine

Histidine

Cysteine

Methionine

Phosphoric Acid

Ascorbic Acid

Sh-Oligopeptide-1

Sh-Oligopeptide-2

Sh-Polypeptide-1

Water, Butylene Glycol, Glycerin, 1,2-Hexanediol, Methyl Trimethicone, Phaseolus Angularis Seed Extract, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Tromethamine, Glyceryl Glucoside, C12-14 Alketh-12, Maltodextrin, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethicone Crosspolymer, Ethylhexylglycerin, Betaine, Panthenol, Allantoin, Dipotassium Glycyrrhizate, Polyquaternium-51, Xanthan Gum, Disodium EDTA, Glyceryl Acrylate/Acrylic Acid Copolymer, Dioscorea Japonica Root Extract, Glucose, Sodium Citrate, Beta-Glucan, Hydrolyzed Corn Starch, Citric Acid, Sucrose, Magnesium Ascorbyl Phosphate, Caprylyl Glycol, Helianthus Annuus Seed Oil, Tocopherol, Cyanocobalamin, Glycine, Serine, Glutamic Acid, Aspartic Acid, Leucine, Acetyl Hexapeptide-8, Alanine, Lysine, Arginine, Tyrosine, Phenylalanine, Proline, Threonine, Valine, Isoleucine, Histidine, Cysteine, Methionine, Phosphoric Acid, Ascorbic Acid, Sh-Oligopeptide-1, Sh-Oligopeptide-2, Sh-Polypeptide-1

Propanediol

Dipropylene Glycol

Niacinamide

Carbomer

Ammonium Acryloyldimethyltaurate/Beheneth-25 Methacrylate Crosspolymer

Parfum

Prunus Yedoensis Leaf Extract

Water, Glycerin, Propanediol, Dipropylene Glycol, Niacinamide, Betaine, 1,2-Hexanediol, Carbomer, Tromethamine, Ammonium Acryloyldimethyltaurate/Beheneth-25 Methacrylate Crosspolymer, Disodium EDTA, Ethylhexylglycerin, Parfum, Prunus Yedoensis Leaf Extract, Tocopherol

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.

It is a:

Humectant, drawing moisture into the skin

Emollient, helping to soften skin

Solvent, dispersing and stabilizing formulas

Preservative booster, enhancing the antimicrobial activity of other preservatives

Betaine is a humectant. Like hyaluronic acid, it helps attract and retain moisture in the skin. It’s known for being gentle and for helping the skin maintain balanced hydration.

Betaine is mainly used to improve hydration and support calmer skin. It helps skin cells regulate water balance because it functions as an osmolyte.

Some studies suggest betaine may support making skin tone more even.

Fun fact: Betaine naturally exists in the skin and the body. In cosmetic products, it can be either plant-derived (most commonly from sugar beets) or synthetically produced for consistency and stability.

Betaine is also known as trimethylglycine.

Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.

This ingredient mainly works behind the scenes and helps with:

On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.

One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).

Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.

You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Tromethamine (aka THAM) is a synthetic amino acid that shows up in skincare as a helper ingredient.

It functions as a pH adjuster to help neutralize acidic ingredients and set a formula's pH to the right spot.

This matters a lot because a lot of actives (like vitamin C) needs a specific pH to work well and feel comfortable on skin.

Concentration use ranges from 0.1-1.0% depending on the formula.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Water
  2. 02Butylene Glycol
  3. 03Glycerin
  4. 041,2-Hexanediol
  5. 05Methyl Trimethicone
  6. 06Phaseolus Angularis Seed Extract
  7. 07Acrylates/C10-30 Alkyl Acrylate Crosspolymer
  8. 08Tromethamine
  9. 09Glyceryl Glucoside
  10. 10C12-14 Alketh-12
  11. 11Maltodextrin
  12. 12Ammonium Acryloyldimethyltaurate/Vp Copolymer
  13. 13Dimethicone/Vinyl Dimethicone Crosspolymer
  14. 14Dimethicone Crosspolymer
  15. 15Ethylhexylglycerin
  16. 16Betaine
  17. 17Panthenol
  18. 18Allantoin
  19. 19Dipotassium Glycyrrhizate
  20. 20Polyquaternium-51
Source · skinsort.com
02

Product index

Related product references

Product

Beauty of Joseon Revive Eye Serum

Beauty of Joseon Revive Eye Serum Beauty of Joseon Revive Eye Serum ingredients explained: Water, Panax Ginseng Root Extract, Glycerin, Dipropylene Glycol, Caprylic/Capric Triglyceride, 1,2…

Source: incidecoder.comView reference →

Product

Beauty of Joseon Repair Serum

Beauty of Joseon Repair Serum Beauty of Joseon Repair Serum ingredients explained: Panax Ginseng Root Water (63%), Butylene Glycol, 1,2-Hexanediol, Snail Secretion Filtrate (3%), Dipropylen…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side