Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Biossance Squalane + Peptide Eye Gel Versus Perricone MD Hypoallergenic Firming Eye Cream

Biossance Squalane + Peptide Eye Gel Versus Perricone MD Hypoallergenic Firming Eye Cream This anti-aging eye moisturizer is formulated around Squalane and Niacinamide to soften the look of wrinkles and hydrate skin. This anti-aging eye moisturizer is formulat

Biossance Squalane + Peptide Eye Gel Versus Perricone MD Hypoallergenic Firming Eye Cream

This anti-aging eye moisturizer is formulated around Squalane and Niacinamide to soften the look of wrinkles and hydrate skin.

This anti-aging eye moisturizer is formulated around Acetyl Octapeptide-3 and Palmitoyl Tripeptide-1 to soften the look of wrinkles.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Aloe Barbadensis Leaf Juice

Squalane

Niacinamide

Glycerin

Panthenol

Chondrus Crispus Extract

Malus Domestica Fruit Cell Culture Extract

Acetyl Tetrapeptide-5

Acetyl Hexapeptide-8

Tocopherol

Pentylene Glycol

Cucumis Sativus Fruit Extract

Tetrahexyldecyl Ascorbate

Camellia Sinensis Leaf Extract

Lycium Barbarum Fruit Extract

Lycopene

Vitis Vinifera Skin Extract

Sodium Hyaluronate

Caffeine

Acacia Senegal Gum

Dimethicone Crosspolymer

Xanthan Gum

Carbomer

Ethyl Lauroyl Arginate Hcl

Lecithin

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Silica

Phenoxyethanol

Potassium Sorbate

Citric Acid

Caprylyl Glycol

Water, Aloe Barbadensis Leaf Juice, Squalane, Niacinamide, Glycerin, Panthenol, Chondrus Crispus Extract, Malus Domestica Fruit Cell Culture Extract, Acetyl Tetrapeptide-5, Acetyl Hexapeptide-8, Tocopherol, Pentylene Glycol, Cucumis Sativus Fruit Extract, Tetrahexyldecyl Ascorbate, Camellia Sinensis Leaf Extract, Lycium Barbarum Fruit Extract, Lycopene, Vitis Vinifera Skin Extract, Sodium Hyaluronate, Caffeine, Acacia Senegal Gum, Dimethicone Crosspolymer, Xanthan Gum, Carbomer, Ethyl Lauroyl Arginate Hcl, Lecithin, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Silica, Phenoxyethanol, Potassium Sorbate, Citric Acid, Caprylyl Glycol

Caprylic/Capric Triglyceride

Hydrogenated Palm Kernel Glycerides

Bis-Diglyceryl Polyacyladipate-2

Cetyl Alcohol

Glyceryl Stearate

Cetearyl Alcohol

Butylene Glycol

Dimethicone

Ethoxydiglycol

Acetyl Octapeptide-3

Palmitoyl Tripeptide-1

Palmitoyl Tetrapeptide-7

Ectoin

Hydrogenated Palm Glycerides

Allantoin

Ethylhexylglycerin

Olea Europaea Leaf Extract

Stearyl Glycyrrhetinate

Tocotrienols

N-Hydroxysuccinimide

Chrysin

PEG-75 Stearate

Steareth-20

Ceteth-20

Elaeis Guineensis Oil

Water, Caprylic/Capric Triglyceride, Glycerin, Hydrogenated Palm Kernel Glycerides, Bis-Diglyceryl Polyacyladipate-2, Cetyl Alcohol, Glyceryl Stearate, Cetearyl Alcohol, Butylene Glycol, Squalane, Dimethicone, Ethoxydiglycol, Acetyl Tetrapeptide-5, Acetyl Octapeptide-3, Palmitoyl Tripeptide-1, Palmitoyl Tetrapeptide-7, Panthenol, Ectoin, Xanthan Gum, Hydrogenated Palm Glycerides, Allantoin, Ethylhexylglycerin, Olea Europaea Leaf Extract, Stearyl Glycyrrhetinate, Sodium Hyaluronate, Tocotrienols, Tocopherol, N-Hydroxysuccinimide, Chrysin, PEG-75 Stearate, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Steareth-20, Ceteth-20, Elaeis Guineensis Oil, Phenoxyethanol

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Acetyl Tetrapeptide-5 is a peptide that goes by another name, eyeseryl, due to claims that it can help reduce eye puffiness.

The manufacturer claims this ingredient reduces eye puffiness by:

An in-vivo study from the manufacturer found 95% of volunteers saw eye bag improvement by the end of the study.

Eye puffiness is caused by two major factors: fluid retention and fat.

Those with fluid retention may see improvement from using this ingredient. However, those with eye fat will need surgical intervention in order to get rid of puffiness.

Ammonium Acryloyldimethyltaurate/Vp Copolymer is a synthetically created polymer. It's used as a film-forming agent and used to thicken the consistency of products.

Think of it as a supportive ingredient that helps your gel-creams feel silky, "cloud cream-like", and spread evenly without being greasy.

The Cosmetic Ingredient Review (CIR) Expert Panel evaluated it (along with 22 other acryloyldimethyltaurate polymers) and concluded it's:

Due to its large molecular size, it sits on the surface of skin rather than penetrating it.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Panthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.

There are two forms of panthenol: D and L.

D-panthenol is also known as dexpanthenol. Most cosmetics use dexpanthenol or a mixture of D and L-panthenol.

Panthenol is famous due to its ability to go deeper into the skin's layers. Using this ingredient has numerous pros (and no cons):

Like hyaluronic acid, panthenol is a humectant. Humectants are able to bind and hold large amounts of water to keep skin hydrated.

This ingredient works well for wound healing. It works by increasing tissue in the wound and helps close open wounds.

Once oxidized, panthenol converts to pantothenic acid. Panthothenic acid is found in all living cells.

This ingredient is also referred to as pro-vitamin B5.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Squalane is the hydrogenated and shelf-stable form of squalene (a lipid that naturally occurs in human sebum).

It is an emollient and skin conditioning agent that is able to integrate seamlessly into the skin's lipid barrier without clogging pores.

This is due to how structurally similar it is to what your skin already produces.

Though it is mostly an emollient that helps soften and hydrate skin, it also has some humectant and occlusive action. Humectants help the skin retain moisture while occlusives seal it in, making squalane a triple-threat moisturizer.

Research shows it has antioxidant capabilities that help protect against stressors like UV exposure, specifically UVA induced oxidative stress. This study also found that it supports collagen biosynthesis in human dermal fibroblasts.

No clinical study has reported significant adverse effects and irritation reactions are very rare from this ingredient (even at 100% concentration).

Overall, it's a fantastic ingredient for hydration and is suitable for all skin types.

This depends on the source. Squalane can be derived from both plants and animals. Most squalane used in skincare comes from plants.

Please note: the source of squalane is only known if disclosed by the brand. We recommend reaching out to the brand if you have any questions about their squalane.

Read more about squalene with an "e".

Though squalane is often called an oil, it’s technically not one. It is a hydrocarbon, meaning it is only made of carbon and hydrogen. True oils are triglycerides and made of fatty acids and glycerol.

The term “oil-free” isn’t regulated so companies can define it however they want. Some exclude all oils, while others just avoid mineral oil or comedogenic oils.

Squalane has a comedogenic rating of 1 from the original 1972 study that tested raw ingredients under occlusion on rabbit ears. This system is not standardized or peer-reviewed, and using the raw ingredients is very different from how diluted cosmetic formulations are used on human skin.

A comedogenic rating of 1 means it is "unlikely to clog pores" according to the original rating system.

The overall formula of a product matters more than the individual ingredients on whether or not it will cause clogged pores.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Water
  2. 02Aloe Barbadensis Leaf Juice
  3. 03Squalane
  4. 04Niacinamide
  5. 05Glycerin
  6. 06Panthenol
  7. 07Chondrus Crispus Extract
  8. 08Malus Domestica Fruit Cell Culture Extract
  9. 09Acetyl Tetrapeptide-5
  10. 10Acetyl Hexapeptide-8
  11. 11Tocopherol
  12. 12Pentylene Glycol
  13. 13Cucumis Sativus Fruit Extract
  14. 14Tetrahexyldecyl Ascorbate
  15. 15Camellia Sinensis Leaf Extract
  16. 16Lycium Barbarum Fruit Extract
  17. 17Lycopene
  18. 18Vitis Vinifera Skin Extract
  19. 19Sodium Hyaluronate
  20. 20Caffeine
Source · skinsort.com
02

Product index

Related product references

Product

Biossance Squalane + Peptide Eye Gel

Biossance Squalane + Peptide Eye Gel Ingredients in Biossance Squalane + Peptide Eye Gel explained: benefits, concerns, and detailed analysis of 32 ingredients including Water, Aloe Barbade…

Source: skinsort.comView reference →

Product

BIOSSANCE Squalane + Peptide Eye Gel

BIOSSANCE Squalane + Peptide Eye Gel BIOSSANCE Squalane + Peptide Eye Gel ingredients explained: Water/Aqua, Aloe Barbadensis Leaf Juice*, Squalane, Niacinamide, Glycerin, Panthenol, Chondr…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side