Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Biossance Squalane + Phyto-Retinol Serum Versus Paula's Choice 1% Retinol Treatment

Biossance Squalane + Phyto-Retinol Serum Versus Paula's Choice 1% Retinol Treatment This anti-aging serum is formulated around Squalane and Niacinamide to soften the look of wrinkles and strengthen the skin barrier. This anti-aging treatment is formulated arou

Biossance Squalane + Phyto-Retinol Serum Versus Paula's Choice 1% Retinol Treatment

This anti-aging serum is formulated around Squalane and Niacinamide to soften the look of wrinkles and strengthen the skin barrier.

This anti-aging treatment is formulated around Retinol and Tetrahexyldecyl Ascorbate to soften the look of wrinkles and refine skin texture.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Squalane

Niacinamide

Sodium Acrylates Copolymer

Bakuchiol

Sodium Hyaluronate

Rosa Canina Fruit Oil

Citrus Aurantium Amara Peel Oil

Biosaccharide Gum-1

Yeast Extract

Soy Amino Acids

Lecithin

Hexylene Glycol

Ethylhexylglycerin

Caprylyl Glycol

Phenoxyethanol

Tetrasodium Glutamate Diacetate

Citric Acid

Linalool

Geraniol

Limonene

Water, Squalane, Niacinamide, Sodium Acrylates Copolymer, Bakuchiol, Sodium Hyaluronate, Rosa Canina Fruit Oil, Citrus Aurantium Amara Peel Oil, Biosaccharide Gum-1, Yeast Extract, Soy Amino Acids, Lecithin, Hexylene Glycol, Ethylhexylglycerin, Caprylyl Glycol, Phenoxyethanol, Tetrasodium Glutamate Diacetate, Citric Acid, Linalool, Geraniol, Limonene

Dimethicone

Glycerin

Butylene Glycol

Isononyl Isononanoate

Castor Isostearate Succinate

Glyceryl Stearate

C12-15 Alkyl Benzoate

Dimethicone Crosspolymer

PEG-33

Polysorbate 20

Behenyl Alcohol

PEG-100 Stearate

Pentaerythrityl Tetraisostearate

Polymethylsilsesquioxane

Tetrahexyldecyl Ascorbate

Retinol

Ceramide Ng

Palmitoyl Tetrapeptide-7

Palmitoyl Hexapeptide-12

Dipotassium Glycyrrhizate

Glycyrrhiza Glabra Root Extract

Avena Sativa Kernel Extract

Arctium Lappa Seed Oil

Salix Alba Extract

Glycine Soja Sterols

Allantoin

Tocopheryl Acetate

Hydrolyzed Soy Protein

Sorbitan Laurate

Acetyl Dipeptide-1 Cetyl Ester

Disodium EDTA

Hydroxyethylcellulose

Palmitoyl Tripeptide-1

Sodium Hydroxide

Tribehenin

Pentylene Glycol

PEG-75 Shea Butter Glycerides

PPG-12/Smdi Copolymer

PEG-10 Phytosterol

PEG-8 Dimethicone

PEG-14

Magnesium Aluminum Silicate

Arachidyl Glucoside

Arachidyl Alcohol

Sclerotium Gum

Carbomer

Benzoic Acid

Water, Dimethicone, Glycerin, Butylene Glycol, Isononyl Isononanoate, Castor Isostearate Succinate, Glyceryl Stearate, C12-15 Alkyl Benzoate, Dimethicone Crosspolymer, PEG-33, Polysorbate 20, Behenyl Alcohol, PEG-100 Stearate, Pentaerythrityl Tetraisostearate, Polymethylsilsesquioxane, Tetrahexyldecyl Ascorbate, Retinol, Ceramide Ng, Palmitoyl Tetrapeptide-7, Palmitoyl Hexapeptide-12, Sodium Hyaluronate, Dipotassium Glycyrrhizate, Glycyrrhiza Glabra Root Extract, Avena Sativa Kernel Extract, Arctium Lappa Seed Oil, Salix Alba Extract, Glycine Soja Sterols, Lecithin, Allantoin, Tocopheryl Acetate, Hydrolyzed Soy Protein, Sorbitan Laurate, Acetyl Dipeptide-1 Cetyl Ester, Disodium EDTA, Hydroxyethylcellulose, Palmitoyl Tripeptide-1, Sodium Hydroxide, Tribehenin, Caprylyl Glycol, Ethylhexylglycerin, Pentylene Glycol, PEG-75 Shea Butter Glycerides, PPG-12/Smdi Copolymer, PEG-10 Phytosterol, PEG-8 Dimethicone, PEG-14, Magnesium Aluminum Silicate, Arachidyl Glucoside, Arachidyl Alcohol, Sclerotium Gum, Carbomer, Phenoxyethanol, Benzoic Acid

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Lecithin is a term for a group of substances found in the cell membranes of plants, animals, and humans. They are made up of phospholipids.

Thanks to its amphiphilic structure (water-loving head and oil-loving tail), it is a true multitasker:

It plays well with most ingredients and is typically used at 0.1-1%. However, concentrations up to 50% have been reported in moisturizers.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
  4. 04Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
  5. 05Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
  6. 06Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.
  7. 07Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.
  8. 08Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).
  9. 09Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  10. 10Topically, glycerin does several things at once:
  11. 11Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
  12. 12Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
  13. 13This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
  14. 14Just know very high concentrations (>40%) can feel tacky in low humidity.
  15. 15Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
  16. 16Glyceryl Stearate is made by reacting glycerin with stearic acid (typically sourced from plant oils like palm or coconut). It's an emulsifier, emollient, and mild occlusive.
  17. 17Emulsifiers help ingredients like oil and water stay mixed so your formula stays nicely blended and uniform in texture.
  18. 18This ingredient is typically used in concentrations between 1-10%. Studies have found it to be non-sensitizing, non-phototoxic, and non-photoallergenic.
  19. 19A close cousin of this ingredient is Glyceryl Stearate SE ("self-emulsifying"). This just has a small amount of sodium or potassium stearate added so it can emulsify without a co-emulsifier.
  20. 20Since this ingredient is an ester of a C18 fatty acid, it may not be fungal acne safe. The Malassezia yeast can potentially metabolize within the C11-C24 range.
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side