Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Clinique Smart Clinical Repair Lifting Face + Neck Cream Versus The INKEY List Bio-Active Ceramide Repairing and Plumping Moisturizer

Clinique Smart Clinical Repair Lifting Face + Neck Cream Versus The INKEY List Bio-Active Ceramide Repairing and Plumping Moisturizer This anti-aging moisturizer is formulated around Butyrospermum Parkii Butter and Acetyl Hexapeptide-8 to soften the look of wr

Clinique Smart Clinical Repair Lifting Face + Neck Cream Versus The INKEY List Bio-Active Ceramide Repairing and Plumping Moisturizer

This anti-aging moisturizer is formulated around Butyrospermum Parkii Butter and Acetyl Hexapeptide-8 to soften the look of wrinkles and hydrate skin.

This barrier-repair moisturizer is formulated around Butyrospermum Parkii Butter and Ceramide NP to strengthen the skin barrier and hydrate skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Butyrospermum Parkii Butter

Butylene Glycol

Caprylic/Capric/Myristic/Stearic Triglyceride

Polyglyceryl-3 Methylglucose Distearate

Glycerin

Coco-Caprylate/Caprate

Simmondsia Chinensis Seed Oil

Polyglyceryl-10 Pentastearate

Glyceryl Stearate

Behenyl Alcohol

Ricinus Communis Seed Oil

Mangifera Indica Seed Butter

Prunus Amygdalus Dulcis Seed Extract

Caffeine

Dimethicone

Ethylhexylglycerin

Dimethicone/Vinyl Dimethicone Crosspolymer

Caprylyl Glycol

Cera Alba

Sodium Hyaluronate

Acetyl Hexapeptide-8

Palmitoyl Tripeptide-1

Palmitoyl Tetrapeptide-7

Palmitoyl Hexapeptide-12

PEG-8

PEG-100 Stearate

Glyceryl Polymethacrylate

Acrylates/Va Copolymer

Copernicia Cerifera Cera

Potassium Cetyl Phosphate

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Sodium Stearoyl Lactylate

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Stearic Acid

Hexylene Glycol

Sodium Hydroxide

Carbomer

Polysorbate 60

Sorbitan Isostearate

Polysorbate 20

Tocopheryl Acetate

Tocopherol

Disodium EDTA

Phenoxyethanol

Chlorphenesin

Potassium Sorbate

Mica

CI 77891

Water, Butyrospermum Parkii Butter, Butylene Glycol, Caprylic/Capric/Myristic/Stearic Triglyceride, Polyglyceryl-3 Methylglucose Distearate, Glycerin, Coco-Caprylate/Caprate, Simmondsia Chinensis Seed Oil, Polyglyceryl-10 Pentastearate, Glyceryl Stearate, Behenyl Alcohol, Ricinus Communis Seed Oil, Mangifera Indica Seed Butter, Prunus Amygdalus Dulcis Seed Extract, Caffeine, Dimethicone, Ethylhexylglycerin, Dimethicone/Vinyl Dimethicone Crosspolymer, Caprylyl Glycol, Cera Alba, Sodium Hyaluronate, Acetyl Hexapeptide-8, Palmitoyl Tripeptide-1, Palmitoyl Tetrapeptide-7, Palmitoyl Hexapeptide-12, PEG-8, PEG-100 Stearate, Glyceryl Polymethacrylate, Acrylates/Va Copolymer, Copernicia Cerifera Cera, Potassium Cetyl Phosphate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Sodium Stearoyl Lactylate, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Stearic Acid, Hexylene Glycol, Sodium Hydroxide, Carbomer, Polysorbate 60, Sorbitan Isostearate, Polysorbate 20, Tocopheryl Acetate, Tocopherol, Disodium EDTA, Phenoxyethanol, Chlorphenesin, Potassium Sorbate, Mica, CI 77891

C12-15 Alkyl Benzoate

Propanediol

Polysilicone-11

C10-18 Triglycerides

Caprylic/Capric Triglyceride

Pentaerythrityl Tetraisostearate

Cetearyl Olivate

Sorbitan Olivate

Cetyl Alcohol

Ceramide NP

Polyacrylate-13

Hydrogenated Polyisobutene

Polyglyceryl-10 Laurate

Ethylhexyl Palmitate

Laureth-12

Hdi/Trimethylol Hexyllactone Crosspolymer

Polymethylsilsesquioxane

Citric Acid

Water, Glycerin, Butyrospermum Parkii Butter, C12-15 Alkyl Benzoate, Propanediol, Polysilicone-11, C10-18 Triglycerides, Caprylic/Capric Triglyceride, Pentaerythrityl Tetraisostearate, Cetearyl Olivate, Sorbitan Olivate, Cetyl Alcohol, Phenoxyethanol, Ceramide NP, Polyacrylate-13, Hydrogenated Polyisobutene, Ethylhexylglycerin, Polyglyceryl-10 Laurate, Ethylhexyl Palmitate, Laureth-12, Sorbitan Isostearate, Hdi/Trimethylol Hexyllactone Crosspolymer, Polymethylsilsesquioxane, Citric Acid, Sodium Hydroxide

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

This ingredient is also known as shea butter. It is a plant-derived extract from the nuts of the Africa shea tree and one of the most well-studied emollients.

Because it has a high concentration of fatty acids (primarily oleic, stearic, and linoleic) it is able to form a protective barrier on the skin's surface. This helps seal in moisture and prevents transepidermal water loss (TEWL).

In vitro research found an increase in skin hydration by 58% and a decrease in TEWL by 37.8% after 24 hours of applying this ingredient (pretty impressive for a single ingredient!).

Besides hydration, shea butter also contains triterpenes that have anti-inflammatory potential. In particule, lupeol cinnamate has shown the highest anti-inflammatory activity in vivo.

Shea butter also contains vitamins A and E which may contribute to antioxidant activity.

While Shea Butter has an SPF rating of about 3-4, it is not a sunscreen replacement.

This ingredient may not be fungal acne safe because its fatty acids fall within the C11-C24 range that the Malassezia yeast can metabolize.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Sodium Hydroxide is also known as lye or caustic soda. It is used to adjust the pH of products; many ingredients require a specific pH to be effective.

In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.

Your skin has a natural pH and acid mantle. This acid mantle helps prevent harmful bacteria from breaking through. The acid mantle also helps keep your skin hydrated.

"Alkaline" refers to a high pH level. A low pH level would be considered acidic.

Sorbitan Isostearate is an emulsifer. It is created from isostearic acid and sorbitol.

As an emulsifier, it keeps the water and oil ingredients from separating. This keeps formulas stable and smooth.

In a 24 hour occlusive patch test on 56 subjects, 10% sorbitan isostearate was completely non-irritating. Most formulas use less than 10%.

Because it's a fatty acid ester, it may not be fungal acne safe since the Malassezia yeast can utilize it as a nutrient source.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Water
  2. 02Butylene Glycol
  3. 03Niacinamide
  4. 04Glycerin
  5. 05Tranexamic Acid
  6. 061,2-Hexanediol
  7. 07Betaine
  8. 08Centella Asiatica Extract
  9. 09Zea Mays Starch
  10. 10Xanthan Gum
  11. 11Microcrystalline Cellulose
  12. 12Mannitol
  13. 13Panthenol
  14. 14Pentylene Glycol
  15. 15Ethylhexylglycerin
  16. 16Hydroxyethylcellulose
  17. 17Madecassoside
  18. 18Acrylates/C10-30 Alkyl Acrylate Crosspolymer
  19. 19Arginine
  20. 20Hydrogenated Lecithin
Source · skinsort.com
02

Product index

Related product references

Product

The Inkey List Snow Mushroom

The Inkey List Snow Mushroom The Inkey List Snow Mushroom ingredients explained: Aqua (Water/Eau), Butylene Glycol, Glycerin, Sodium Acrylates Copolymer, Phenoxyethanol, Sodium Caproyl Prol…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side