Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Clinique Smart Clinical Repair Wrinkle Correcting Serum Versus L'Oreal Revitalift Filler 1.5% Pure Hyaluronic Acid Serum

Clinique Smart Clinical Repair Wrinkle Correcting Serum Versus L'Oreal Revitalift Filler 1.5% Pure Hyaluronic Acid Serum This anti-aging serum is formulated around Acetyl Hexapeptide-8 and Palmitoyl Tripeptide-1 to soften the look of wrinkles and refine skin t

Clinique Smart Clinical Repair Wrinkle Correcting Serum Versus L'Oreal Revitalift Filler 1.5% Pure Hyaluronic Acid Serum

This anti-aging serum is formulated around Acetyl Hexapeptide-8 and Palmitoyl Tripeptide-1 to soften the look of wrinkles and refine skin texture.

This anti-aging serum is formulated around Sodium Hyaluronate and Dipeptide Diaminobutyroyl Benzylamide Diacetate to soften the look of wrinkles and hydrate skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Dimethicone

Isododecane

Butylene Glycol

Glycerin

Polysilicone-11

Ascorbyl Glucoside

Sodium Hyaluronate

Tocopheryl Acetate

Squalane

Hypnea Musciformis Extract

Gelidiella Acerosa Extract

Sigesbeckia Orientalis Extract

Helianthus Annuus Seed Extract

Hordeum Vulgare Extract

Triticum Vulgare Germ Extract

Cucumis Sativus Fruit Extract

Caffeine

Acetyl Hexapeptide-8

Palmitoyl Tripeptide-1

Palmitoyl Tetrapeptide-7

Palmitoyl Hexapeptide-12

PEG-10 Dimethicone

Glycyrrhetinic Acid

Whey Protein

Isohexadecane

Propylene Glycol Dicaprate

Caprylyl Glycol

Hydroxypinacolone Retinoate

Acetyl Glucosamine

Cholesterol

PEG-8

Faex Extract

PEG-6

Dimethyl Isosorbide

Glyceryl Polymethacrylate

Polysorbate 20

Sodium Phosphate

Synthetic Fluorphlogopite

Polysorbate 80

Carbomer

Hexylene Glycol

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Acrylamide/Sodium Acryloyldimethyltaurate Copolymer

Potassium Hydroxide

Tin Oxide

Disodium Phosphate

Citric Acid

Disodium EDTA

Sodium Citrate

Phenoxyethanol

Potassium Sorbate

CI 77891

Water, Dimethicone, Isododecane, Butylene Glycol, Glycerin, Polysilicone-11, Ascorbyl Glucoside, Sodium Hyaluronate, Tocopheryl Acetate, Squalane, Hypnea Musciformis Extract, Gelidiella Acerosa Extract, Sigesbeckia Orientalis Extract, Helianthus Annuus Seed Extract, Hordeum Vulgare Extract, Triticum Vulgare Germ Extract, Cucumis Sativus Fruit Extract, Caffeine, Acetyl Hexapeptide-8, Palmitoyl Tripeptide-1, Palmitoyl Tetrapeptide-7, Palmitoyl Hexapeptide-12, PEG-10 Dimethicone, Glycyrrhetinic Acid, Whey Protein, Isohexadecane, Propylene Glycol Dicaprate, Caprylyl Glycol, Hydroxypinacolone Retinoate, Acetyl Glucosamine, Cholesterol, PEG-8, Faex Extract, PEG-6, Dimethyl Isosorbide, Glyceryl Polymethacrylate, Polysorbate 20, Sodium Phosphate, Synthetic Fluorphlogopite, Polysorbate 80, Carbomer, Hexylene Glycol, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Acrylamide/Sodium Acryloyldimethyltaurate Copolymer, Potassium Hydroxide, Tin Oxide, Disodium Phosphate, Citric Acid, Disodium EDTA, Sodium Citrate, Phenoxyethanol, Potassium Sorbate, CI 77891

Hydroxyethylpiperazine Ethane Sulfonic Acid

Dipeptide Diaminobutyroyl Benzylamide Diacetate

Secale Cereale Seed Extract

Calcium Pantothenate

PEG-60 Hydrogenated Castor Oil

Pentylene Glycol

Benzyl Alcohol

Benzyl Benzoate

Benzyl Salicylate

Citronellol

Linalool

Chlorphenesin

Parfum

Water, Glycerin, Hydroxyethylpiperazine Ethane Sulfonic Acid, Sodium Hyaluronate, Dipeptide Diaminobutyroyl Benzylamide Diacetate, Disodium EDTA, Secale Cereale Seed Extract, Ascorbyl Glucoside, Calcium Pantothenate, PEG-60 Hydrogenated Castor Oil, Pentylene Glycol, Benzyl Alcohol, Benzyl Benzoate, Benzyl Salicylate, Citronellol, Linalool, Chlorphenesin, Phenoxyethanol, Parfum

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Ascorbyl Glucoside (AA-2G) is one of the most stable vitamin C derivatives out there.

It's made by attaching a glucose molecule to ascorbic acid; this glucose "cap" shields the vitamin C from air, light, heat, and metal ions that normally cause pure ascorbic acid to oxidize.

Once on your skin, the enzyme alpha-glucosidase snips off the glucose and gradually releases active ascorbic acid right where it's needed. Basically, it behaves like a slow-release pro-vitamin C with less of a stinging that high-strength ascorbic acid can cause.

The research supports the classic vitamin C benefits as well. In lab and human studies, AA-2G slowed down the skin's production of melanin (the pigment behind dark spots) and helped shield skin cells against sun damage better than ascorbyl phosphate.

These studies also showed AA-2G released vitamin C over a longer period.

A frequently cited manufacturer trial found that a 2% AA-2G face cream significantly improved wrinkle depth and skin roughness after 45 days.

And in 2009, a clinical trial showed it meaningfully lightened dark patches on the gums compared to a placebo.

There's also collagen-synthesis support (since vitamin C is a required cofactor for that) and an antioxidant effect too.

Typical usage is usually between 0.5-5% and most studies/products land around 2%.

AA-2G performs best when formulated at a mildly acidic pH (~5-7) which is much gentler than the pH that pure vitamin C demands (~2.5-3.5).

Just one thing worth knowing: the in-skin conversation rate is only about 55-60% by weight. So a 5% AA-2G product delivers roughly 2.75-3% of actual active vitamin C. On top of that, skin absorption is relatively low because the ingredient is water-soluble.

Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.

This ingredient mainly works behind the scenes and helps with:

On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.

One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).

Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.

You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Squalane is the hydrogenated and shelf-stable form of squalene (a lipid that naturally occurs in human sebum).
  4. 04It is an emollient and skin conditioning agent that is able to integrate seamlessly into the skin's lipid barrier without clogging pores.
  5. 05This is due to how structurally similar it is to what your skin already produces.
  6. 06Though it is mostly an emollient that helps soften and hydrate skin, it also has some humectant and occlusive action. Humectants help the skin retain moisture while occlusives seal it in, making squalane a triple-threat moisturizer.
  7. 07Research shows it has antioxidant capabilities that help protect against stressors like UV exposure, specifically UVA induced oxidative stress. This study also found that it supports collagen biosynthesis in human dermal fibroblasts.
  8. 08No clinical study has reported significant adverse effects and irritation reactions are very rare from this ingredient (even at 100% concentration).
  9. 09Overall, it's a fantastic ingredient for hydration and is suitable for all skin types.
  10. 10This depends on the source. Squalane can be derived from both plants and animals. Most squalane used in skincare comes from plants.
  11. 11Please note: the source of squalane is only known if disclosed by the brand. We recommend reaching out to the brand if you have any questions about their squalane.
  12. 12Read more about squalene with an "e".
  13. 13Though squalane is often called an oil, it’s technically not one. It is a hydrocarbon, meaning it is only made of carbon and hydrogen. True oils are triglycerides and made of fatty acids and glycerol.
  14. 14The term “oil-free” isn’t regulated so companies can define it however they want. Some exclude all oils, while others just avoid mineral oil or comedogenic oils.
  15. 15Squalane has a comedogenic rating of 1 from the original 1972 study that tested raw ingredients under occlusion on rabbit ears. This system is not standardized or peer-reviewed, and using the raw ingredients is very different from how diluted cosmet…
  16. 16A comedogenic rating of 1 means it is "unlikely to clog pores" according to the original rating system.
  17. 17The overall formula of a product matters more than the individual ingredients on whether or not it will cause clogged pores.
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side

04

Ask the journal

Related questions

01How to Apply Face Serums

Skincare rules can get confusing, but when it comes to application the general rule of thumb is to pay attention to the product’s consistency. “Apply the lightest, thinnest product first and the heaviest, and more dense products last, since thinner products can’t penetrate thicker products,”says Dr. Lewis. After cleansing the face and following up with a toner, let the skin dry before using a serum. You can layer different serums on top of each other or opt for a product that has a precise mix of multiple hero ingredients, such as hyaluronic acid and vitamin C.

Source · www.skincare.com
02What Skin Types Should Use Hyaluronic Acid?

“Hyaluronic acid is particularly helpful for those experiencing dry skin, and for those desiring a plumping effect,” explains Dr. King. But, if you have an oily skin type, don’t discredit hyaluronic acid from your routine just yet. Despite the excess sebum that you may experience, it’s important to keep your skin hydrated so that it doesn’t overcompensate and produce even more oil as a result. Besides your skin type, you should also look at the condition of your skin to decide if it’s time to begin using hyaluronic acid. “If your skin is starting to look dull, flaky and you’re seeing more pronounced fine lines and wrinkles, that’s a pretty good indication that it’s time to add this ingredient to your routine,” adds O’Conner.

Source · www.skincare.com