Skin science article
Coppertone Complete Face SPF 45 Versus Beauty of Joseon Relief Sun : Rice + Probiotics SPF 50+ PA++++
Coppertone Complete Face SPF 45 Versus Beauty of Joseon Relief Sun : Rice + Probiotics SPF 50+ PA++++ This chemical sunscreen covers most of the UV range, lighter on the deep UVA that drives aging. This chemical sunscreen covers the full UV range and blocks ~9
Coppertone Complete Face SPF 45 Versus Beauty of Joseon Relief Sun : Rice + Probiotics SPF 50+ PA++++
This chemical sunscreen covers most of the UV range, lighter on the deep UVA that drives aging.
This chemical sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Butyl Methoxydibenzoylmethane 3%
Homosalate 10%
Ethylhexyl Salicylate 5%
Octocrylene 10%
Water
Alcohol Denat.
Butyloctyl Salicylate
Silica
Bis-Octyldodecyl Dimer Dilinoleate/Propanediol Copolymer
Glyceryl Stearate
Tapioca Starch
Behenyl Alcohol
Butylene Glycol Dicaprylate/Dicaprate
C12-15 Alkyl Benzoate
Cetearyl Alcohol
Copernicia Cerifera Wax
Dibutyl Adipate
Tocopherol
Sodium Ascorbyl Phosphate
Silica Dimethyl Silylate
Sodium Stearoyl Glutamate
Glyceryl Behenate
Polyglyceryl-6 Octastearate
Diethylhexyl Syringylidenemalonate
Phenoxyethanol
Xanthan Gum
Ethylhexylglycerin
Hydroxyacetophenone
Disodium EDTA
Glycerin
Sodium Hyaluronate
Cetyl Alcohol
Butyl Methoxydibenzoylmethane 3%, Homosalate 10%, Ethylhexyl Salicylate 5%, Octocrylene 10%, Water, Alcohol Denat., Butyloctyl Salicylate, Silica, Bis-Octyldodecyl Dimer Dilinoleate/Propanediol Copolymer, Glyceryl Stearate, Tapioca Starch, Behenyl Alcohol, Butylene Glycol Dicaprylate/Dicaprate, C12-15 Alkyl Benzoate, Cetearyl Alcohol, Copernicia Cerifera Wax, Dibutyl Adipate, Tocopherol, Sodium Ascorbyl Phosphate, Silica Dimethyl Silylate, Sodium Stearoyl Glutamate, Glyceryl Behenate, Polyglyceryl-6 Octastearate, Diethylhexyl Syringylidenemalonate, Phenoxyethanol, Xanthan Gum, Ethylhexylglycerin, Hydroxyacetophenone, Disodium EDTA, Glycerin, Sodium Hyaluronate, Cetyl Alcohol
Propanediol
Diethylamino Hydroxybenzoyl Hexyl Benzoate
Polymethylsilsesquioxane
Ethylhexyl Triazone
Niacinamide
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
Coco-Caprylate/Caprate
Caprylyl Methicone
Diethylhexyl Butamido Triazone
1,2-Hexanediol
Butylene Glycol
Oryza Sativa Extract
Oryza Sativa Germ Extract
Camellia Sinensis Leaf Extract
Lactobacillus/Pumpkin Ferment Extract
Bacillus/Soybean Ferment Extract
Saccharum Officinarum Extract
Macrocystis Pyrifera Extract
Cocos Nucifera Fruit Extract
Panax Ginseng Root Extract
Monascus/Rice Ferment
Poly C10-30 Alkyl Acrylate
Polyglyceryl-3 Methylglucose Distearate
Decyl Glucoside
Tromethamine
Carbomer
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Polyacrylate Crosspolymer-6
Adenosine
T-Butyl Alcohol
Lactobacillus/Rice Ferment
Aspergillus Ferment
Saccharomyces/Rice Ferment Filtrate
Pentylene Glycol
Water, Dibutyl Adipate, Propanediol, Diethylamino Hydroxybenzoyl Hexyl Benzoate, Polymethylsilsesquioxane, Ethylhexyl Triazone, Niacinamide, Methylene Bis-Benzotriazolyl Tetramethylbutylphenol, Coco-Caprylate/Caprate, Caprylyl Methicone, Diethylhexyl Butamido Triazone, Glycerin, 1,2-Hexanediol, Butylene Glycol, Oryza Sativa Extract, Oryza Sativa Germ Extract, Camellia Sinensis Leaf Extract, Lactobacillus/Pumpkin Ferment Extract, Bacillus/Soybean Ferment Extract, Saccharum Officinarum Extract, Macrocystis Pyrifera Extract, Cocos Nucifera Fruit Extract, Panax Ginseng Root Extract, Monascus/Rice Ferment, Behenyl Alcohol, Poly C10-30 Alkyl Acrylate, Polyglyceryl-3 Methylglucose Distearate, Decyl Glucoside, Tromethamine, Carbomer, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Sodium Stearoyl Glutamate, Polyacrylate Crosspolymer-6, Adenosine, Xanthan Gum, T-Butyl Alcohol, Tocopherol, Lactobacillus/Rice Ferment, Aspergillus Ferment, Saccharomyces/Rice Ferment Filtrate, Pentylene Glycol, Ethylhexylglycerin
Reviews
Be the first to review
Alternatives
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Behenyl Alcohol is a type of fatty alcohol (these are different from the drying, solvent alcohols).
Fatty Alcohols have hydrating properties and are most often used as an emollient or to thicken a product. They are usually derived from natural fats and oils; behenyl alcohol is derived from the fats of vegetable oils.
Emollients help keep your skin soft and hydrated by creating a film that traps moisture in.
In 2000, Behenyl Alcohol was approved by the US as medicine to reduce the duration of cold sores.
Dibutyl Adipate is a lightweight, oil-soluble ester that acts as an emollient and solvent. It helps products spread more easily and leaves a soft, silky, dry-touch finish without being greasy.
You'll likely see this ingredient in sunscreens because it does a nice job dissolving UV filters and keeping them evenly distributed.
This ingredient has been found to be safe as used in cosmetics, wasn't a skin or eye irritant in clinical patch testing, and wasn't phototoxic.
In a clinical comedogenicity test, this ingredient tested negative so it isn't likely to clog pores.
Typical use levels are about 5-8% for sunscreens + nail products, but can range from 0.005%-8% depending on the product.
Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Sodium Stearoyl Glutamate is an amino-acid based emulsifier. It is made by combining stearic acid with L-glutamic acid and neutralizing it to a sodium salt.
As an emulsifier, it works mainly as an oil-in-water one and helps keep the oil and water in your formulas blended. It also contributes to a smooth, non-greasy skin feel.
This ingredient is biodegradable and commonly available in natural/COSMOS-certified grades.
Tocopherol is a fat-soluble antioxidant known as Vitamin E.
You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.
Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.
It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.
This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.
This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.
In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.
Concentrations usually range from 0.1-1% in most leave-on products.
Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!
Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.
On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.
Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.