Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

COSRX Hydrium Centella Aqua Soothing Ampoule Versus Torriden Dive-In Low-Molecular Hyaluronic Acid Serum

COSRX Hydrium Centella Aqua Soothing Ampoule Versus Torriden Dive-In Low-Molecular Hyaluronic Acid Serum This calming ampoule is formulated around Centella Asiatica Extract and Madecassoside to calm redness and hydrate skin. This hydrating serum is formulated

COSRX Hydrium Centella Aqua Soothing Ampoule Versus Torriden Dive-In Low-Molecular Hyaluronic Acid Serum

This calming ampoule is formulated around Centella Asiatica Extract and Madecassoside to calm redness and hydrate skin.

This hydrating serum is formulated around Panthenol and Hydrolyzed Hyaluronic Acid to hydrate skin and strengthen the skin barrier.

What's inside

Key Ingredients

Benefits

Concerns

No concerns

Ingredients Side-by-side

Water

Centella Asiatica Extract

Dipropylene Glycol

Glycerin

1,2-Hexanediol

Betaine

Chondrus Crispus Extract

Saccharum Officinarum Extract

Pentylene Glycol

Octanediol

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Xanthan Gum

Ethylhexylglycerin

Allantoin

Madecassoside

Panthenol

Water, Centella Asiatica Extract, Dipropylene Glycol, Glycerin, 1,2-Hexanediol, Betaine, Chondrus Crispus Extract, Saccharum Officinarum Extract, Pentylene Glycol, Octanediol, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Xanthan Gum, Ethylhexylglycerin, Allantoin, Madecassoside, Panthenol

Butylene Glycol

Sodium Hyaluronate Crosspolymer

Hydrolyzed Hyaluronic Acid

Sodium Hyaluronate

Sodium Acetylated Hyaluronate

Hydrolyzed Sodium Hyaluronate

Ectoin

Glycyrrhiza Glabra Root Extract

2,3-Butanediol

Trehalose

Propanediol

Portulaca Oleracea Extract

Hamamelis Virginiana Leaf Extract

Madecassic Acid

Ceramide NP

Beta-Glucan

Malachite Extract

Cholesterol

Glyceryl Acrylate/Acrylic Acid Copolymer

Pvm/Ma Copolymer

Polyglyceryl-10 Laurate

Tromethamine

Carbomer

Scutellaria Baicalensis Root Extract

Paeonia Suffruticosa Root Extract

Water, Butylene Glycol, Glycerin, Dipropylene Glycol, 1,2-Hexanediol, Panthenol, Sodium Hyaluronate Crosspolymer, Hydrolyzed Hyaluronic Acid, Sodium Hyaluronate, Sodium Acetylated Hyaluronate, Hydrolyzed Sodium Hyaluronate, Allantoin, Ectoin, Glycyrrhiza Glabra Root Extract, 2,3-Butanediol, Trehalose, Betaine, Propanediol, Portulaca Oleracea Extract, Hamamelis Virginiana Leaf Extract, Madecassoside, Madecassic Acid, Ceramide NP, Beta-Glucan, Malachite Extract, Cholesterol, Pentylene Glycol, Glyceryl Acrylate/Acrylic Acid Copolymer, Pvm/Ma Copolymer, Polyglyceryl-10 Laurate, Xanthan Gum, Tromethamine, Carbomer, Ethylhexylglycerin, Scutellaria Baicalensis Root Extract, Paeonia Suffruticosa Root Extract

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.

It is a:

Humectant, drawing moisture into the skin

Emollient, helping to soften skin

Solvent, dispersing and stabilizing formulas

Preservative booster, enhancing the antimicrobial activity of other preservatives

Allantoin is a soothing ingredient known for its protective and moisturizing properties; it's basically a quiet workhorse ingredient you can find in a huge range of cosmetics.

Though it can be derived from the comfrey plant, allantoin is produced synthetically for cosmetic products to ensure purity.

Research shows it can encourage your skin cells to turn over and renew by stimulating keratinocyte and fibroblast proliferation.

It also has mild keratolytic properties to help loosen and shed dead skin cells without being harsh.

Studies also suggest allantoin can help calm inflammation by dialing down some of the chemical signals your skin sends out when it is irritated.

This ingredient is typically used in the 0.1-0.5% range, and the FDA recognizes it as a skin protectant in OTC products up to 2%.

Overall, allantoin is a wonderful addition to most routines; it is stable across a wide pH range (~4-8), works well with other ingredients, and is considered non-sensitizing/non-irritating.

Fun fact: Allantoin is naturally occurring in comfrey root, beets, chamomile, and wheat sprouts. Our bodies even produce it as a byproduct of uric acid metabolism.

Betaine is a humectant. Like hyaluronic acid, it helps attract and retain moisture in the skin. It’s known for being gentle and for helping the skin maintain balanced hydration.

Betaine is mainly used to improve hydration and support calmer skin. It helps skin cells regulate water balance because it functions as an osmolyte.

Some studies suggest betaine may support making skin tone more even.

Fun fact: Betaine naturally exists in the skin and the body. In cosmetic products, it can be either plant-derived (most commonly from sugar beets) or synthetically produced for consistency and stability.

Betaine is also known as trimethylglycine.

Dipropylene Glycol is a synthetically created humectant, stabilizer, and solvent.

This ingredient helps:

Dipropylene glycol is technically an alcohol, but it belongs to the glycol family (often considered part of the ‘good’ alcohols). This means it is hydrating and gentle on skin unlike drying solvent alcohols like denatured alcohol.

As a masking agent, Dipropylene Glycol can be used to cover the smell of other ingredients. However, it does not have a scent.

Studies show Dipropylene Glycol is considered safe to use in skincare.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Madecassoside is one of four active compounds found in Centella asiatica and is one of the main reasons Centella is so effective at calming irritated skin and supporting the moisture barrier.

There's a solid body of peer-reviewed research backing Madecassoside for several skin benefits. Studies have found:

Madecassoside pairs well with other hydrating or antioxidant ingredients like Ascorbic Acid or Hyaluronic Acid.

Panthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.

There are two forms of panthenol: D and L.

D-panthenol is also known as dexpanthenol. Most cosmetics use dexpanthenol or a mixture of D and L-panthenol.

Panthenol is famous due to its ability to go deeper into the skin's layers. Using this ingredient has numerous pros (and no cons):

Like hyaluronic acid, panthenol is a humectant. Humectants are able to bind and hold large amounts of water to keep skin hydrated.

This ingredient works well for wound healing. It works by increasing tissue in the wound and helps close open wounds.

Once oxidized, panthenol converts to pantothenic acid. Panthothenic acid is found in all living cells.

This ingredient is also referred to as pro-vitamin B5.

Pentylene Glycol (1,2-pentanediol) is a multitasking little diol with three main roles in a formula:

Research on alkanediols (the family pentylene glycol belongs to) show they work by disrupting microbial cell membranes. This disruption helps the primary preservative system in a product work more effectively at lower doses.

On the safety side, the Cosmetic Ingredient Review Expert Panel has concluded this ingredient to be safe as used in current cosmetic practices + concentrations.

Typical use levels in a formula run about 1-5%.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Organik botanik Hyaluronic Acid SerumIngredients explained

  1. 01It’s naturally in our skin and behaves there like a sponge
  2. 02It can bind up to 1000 times its own weight in water
  3. 03It is a big molecule from repeated subunits (polymer) so different molecular weight versions exist (unfortunately there is no way to determine MW from INCI list only)
  4. 04High-molecular-weight-HA (>500 kDa) is an excellent surface hydrator, skin protectant and can act as an osmotic pump helping water-soluble actives to penetrate deeper into the skin
  5. 05Low-molecular-weight-HA (< 500 kDa) can hydrate the skin somewhat deeper though it is still a big molecule and works mainly in the epidermis (outer layer of the skin)
  6. 06Low-molecular-weight-HA might also help the skin to repair itself by increasing its self-defense (~ 200kDa used in the study)
  7. 07Ultra-low-molecular-weight-HA (<50kDa) is a controversial ingredient and might work as a pro-inflammatory signal molecule
  8. 08Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product.
  9. 09It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water.
  10. 10Expand to read more
  11. 11Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying.
  12. 12One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time.
  13. 13Butylene glycol, or let’s just call it BG, is a multi-tasking colorless, syrupy liquid. It’s a great pick for creating a nice feeling product.
  14. 14BG’s main job is usually to be a solvent for the other ingredients. Other tasks include helping the product to absorb faster and deeper into the skin (penetration enhancer), making the product spread nicely over the skin (slip agent), and attracting…
  15. 15It’s an ingredient whose safety hasn’t been questioned so far by anyone (at least not that we know about). BG is approved by Ecocert and is also used enthusiastically in natural products. BTW, it’s also a food additive.
  16. 16Biosaccharide Gum-1 is a pretty interesting kind of sugar ingredient that is created from sorbitol via bacterial fermentation.
  17. 17According to the manufacturer it’s a “S.M.A.R.T.” sugar: it has Soothing, Moisturizing, Anti-aging, Restructuring and Touch properties. Let’s look at them quickly one by one.
  18. 18Soothing: the manufacturer tested out the soothing effect in vivo (meaning on humans that is always a good thing!) by measuring how 3% Biosaccharide Gum-1 decreased the tingling sensation caused by 10% lactic acid. The result was good: the tingling …
  19. 19Moisturizing: Compared to famous hyaluronic acid, it turns out that the two are great together. HA has a quicker effect and provides more instant hydration (much more hydration was measured after 1h of application), while our nice sugar has a somewh…
  20. 20Anti-aging: According to ex-vivo tests (meaning not on humans, so do not trust it too much) Biosaccharide Gum-1 can stimulate a protein in our skin called sirtuin-1. This is supposed to help our skin cells to live longer, and function better.
Source · incidecoder.com
02

Product index

Related product references

Product

Fiery Youth Hyaluronic Acid Serum

Fiery Youth Hyaluronic Acid Serum Fiery Youth Hyaluronic Acid Serum ingredients explained: Aqua(Distilled Water), Hyaluronic Acid (5% Sodium Hyaluronate), Tocopherol(Vitamin E), Codium Tome…

Source: incidecoder.comView reference →

Product

100% Pure Rose Hyaluronic Acid Serum

100% Pure Rose Hyaluronic Acid Serum Ingredients in 100% Pure Rose Hyaluronic Acid Serum explained: benefits, concerns, and detailed analysis of 18 ingredients including Aloe Barbadensis Le…

Source: skinsort.comView reference →
03

Comparison edit

Read side by side

04

Ask the journal

Related questions

01What Skin Types Should Use Hyaluronic Acid?

“Hyaluronic acid is particularly helpful for those experiencing dry skin, and for those desiring a plumping effect,” explains Dr. King. But, if you have an oily skin type, don’t discredit hyaluronic acid from your routine just yet. Despite the excess sebum that you may experience, it’s important to keep your skin hydrated so that it doesn’t overcompensate and produce even more oil as a result. Besides your skin type, you should also look at the condition of your skin to decide if it’s time to begin using hyaluronic acid. “If your skin is starting to look dull, flaky and you’re seeing more pronounced fine lines and wrinkles, that’s a pretty good indication that it’s time to add this ingredient to your routine,” adds O’Conner.

Source · www.skincare.com
02How to Apply Face Serums

Skincare rules can get confusing, but when it comes to application the general rule of thumb is to pay attention to the product’s consistency. “Apply the lightest, thinnest product first and the heaviest, and more dense products last, since thinner products can’t penetrate thicker products,”says Dr. Lewis. After cleansing the face and following up with a toner, let the skin dry before using a serum. You can layer different serums on top of each other or opt for a product that has a precise mix of multiple hero ingredients, such as hyaluronic acid and vitamin C.

Source · www.skincare.com