Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Drunk Elephant B-Hydra Intensive Hydration Serum Versus Glow Recipe Plum Plump Hyaluronic Acid Serum

Drunk Elephant B-Hydra Intensive Hydration Serum Versus Glow Recipe Plum Plump Hyaluronic Acid Serum This hydrating serum is formulated around Sclerocarya Birrea Seed Oil and Panthenol to hydrate skin and strengthen the skin barrier. This hydrating serum is fo

Drunk Elephant B-Hydra Intensive Hydration Serum Versus Glow Recipe Plum Plump Hyaluronic Acid Serum

This hydrating serum is formulated around Sclerocarya Birrea Seed Oil and Panthenol to hydrate skin and strengthen the skin barrier.

This hydrating serum is formulated around Sodium Acetylated Hyaluronate and Sodium Hyaluronate to hydrate skin and strengthen the skin barrier.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Coconut Alkanes

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Glycerin

Pentylene Glycol

Sclerocarya Birrea Seed Oil

Wheat Amino Acids

Ananas Sativus Fruit Extract

Berberis Vulgaris Root Extract

Citrullus Lanatus Fruit Extract

Lens Esculenta Fruit Extract

Pyrus Malus Fruit Extract

Coco-Caprylate/Caprate

Panthenol

Sodium PCA

Sodium Hyaluronate Crosspolymer

Dipotassium Glycyrrhizate

Niacinamide

Cyclodextrin

Sodium Hyaluronate

Sodium Lactate

Phenoxyethanol

Hydroxyproline

Trisodium Ethylenediamine Disuccinate

Citric Acid

Caprylyl Glycol

Chlorphenesin

Ethylhexylglycerin

Water, Coconut Alkanes, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Glycerin, Pentylene Glycol, Sclerocarya Birrea Seed Oil, Wheat Amino Acids, Ananas Sativus Fruit Extract, Berberis Vulgaris Root Extract, Citrullus Lanatus Fruit Extract, Lens Esculenta Fruit Extract, Pyrus Malus Fruit Extract, Coco-Caprylate/Caprate, Panthenol, Sodium PCA, Sodium Hyaluronate Crosspolymer, Dipotassium Glycyrrhizate, Niacinamide, Cyclodextrin, Sodium Hyaluronate, Sodium Lactate, Phenoxyethanol, Hydroxyproline, Trisodium Ethylenediamine Disuccinate, Citric Acid, Caprylyl Glycol, Chlorphenesin, Ethylhexylglycerin

Propanediol

Pleiogynium Timoriense Fruit Extract

Podocarpus Elatus Fruit Extract

Terminalia Ferdinandiana Fruit Extract

Sodium Acetylated Hyaluronate

Tremella Fuciformis Polysaccharide

Acacia Seyal Gum Extract

Sr-Spider Polypeptide-1

Pantothenic Acid

Phospholipids

Sodium Hydroxide

Spirulina Platensis Extract

Raphanus Sativus Root Extract

Tetrasodium Glutamate Diacetate

Polyglyceryl-6 Caprylate

Polyglyceryl-4 Caprate

Potassium Sorbate

Propylene Glycol

Leuconostoc/Radish Root Ferment Filtrate

1,2-Hexanediol

Hydroxyacetophenone

Carrageenan

Xanthan Gum

Sodium Glycolate

Sodium Formate

Parfum

Water, Glycerin, Propanediol, Pentylene Glycol, Pleiogynium Timoriense Fruit Extract, Podocarpus Elatus Fruit Extract, Terminalia Ferdinandiana Fruit Extract, Sodium Acetylated Hyaluronate, Sodium Hyaluronate, Tremella Fuciformis Polysaccharide, Acacia Seyal Gum Extract, Sr-Spider Polypeptide-1, Pantothenic Acid, Phospholipids, Sodium Hydroxide, Spirulina Platensis Extract, Raphanus Sativus Root Extract, Caprylyl Glycol, Chlorphenesin, Tetrasodium Glutamate Diacetate, Polyglyceryl-6 Caprylate, Polyglyceryl-4 Caprate, Potassium Sorbate, Propylene Glycol, Leuconostoc/Radish Root Ferment Filtrate, 1,2-Hexanediol, Citric Acid, Ethylhexylglycerin, Hydroxyacetophenone, Carrageenan, Xanthan Gum, Sodium Glycolate, Sodium Formate, Phenoxyethanol, Parfum

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Chlorphenesin is a synthetic preservative. It helps protect a product against bacteria in order to extend shelf life. In most cases, Chlorphenesin is paired with other preservatives such as phenoxyethanol and caprylyl glycol.

Chlorphenesin is a biocide. This means it is able to help fight the microorganisms on our skin. It is also able to fight odor-releasing bacteria.

Chlorphenesin is soluble in both water and glycerin.

Studies show Chlorphenesin is easily absorbed by our skin. You should speak with a skincare professional if you have concerns about using Chlorphenesin.

Citric Acid is an alpha hydroxy acid (AHA) naturally found in citrus fruits like oranges, lemons, and limes.

Like other AHAs, citric acid can exfoliate skin by breaking down the bonds that hold dead skin cells together. This helps reveal smoother and brighter skin underneath.

However, this exfoliating effect only happens at high concentrations (20%) which can be hard to find in cosmetic products.

Due to this, citric acid is usually included in small amounts as a pH adjuster. This helps keep products slightly more acidic and compatible with skin's natural pH.

In skincare formulas, citric acid can:

While it can provide some skin benefits, research shows lactic acid and glycolic acid are generally more effective and less irritating exfoliants.

Most citric acid used in skincare today is made by fermenting sugars (usually from molasses). This synthetic version is identical to the natural citrus form but easier to stabilize and use in formulations.

Rosacea skin has a lower threshold for acids generally, with 62.5% of rosacea subjects in one study reacting to lactic acid in a sting test. This is why we mark citric acid as a potential rosacea trigger.

However, this ingredient shows up as a pH adjuster or chelator at roughly 0.1-1% in many products. These low levels are unlikely to be an issue for rosacea skin and becomes a potential trigger at exfoliating concentrations (20%). Because everybody's skin is unique, we recommend a patch test if you are unsure.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Pentylene Glycol (1,2-pentanediol) is a multitasking little diol with three main roles in a formula:

Research on alkanediols (the family pentylene glycol belongs to) show they work by disrupting microbial cell membranes. This disruption helps the primary preservative system in a product work more effectively at lower doses.

On the safety side, the Cosmetic Ingredient Review Expert Panel has concluded this ingredient to be safe as used in current cosmetic practices + concentrations.

Typical use levels in a formula run about 1-5%.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 031,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.
  4. 04It is a:
  5. 05Humectant, drawing moisture into the skin
  6. 06Emollient, helping to soften skin
  7. 07Solvent, dispersing and stabilizing formulas
  8. 08Preservative booster, enhancing the antimicrobial activity of other preservatives
  9. 092,3-Butanediol is a naturally occurring humectant and solvent. It's created from fermentation and can be found in foods like cocoa butter and sweet corn.
  10. 10This ingredient attracts and holds onto moisture to boost hydration in skin. According to a manufacturer, this ingredient improves the spreadability of ingredients like vitamin C.
  11. 11Allantoin is a soothing ingredient known for its protective and moisturizing properties; it's basically a quiet workhorse ingredient you can find in a huge range of cosmetics.
  12. 12Though it can be derived from the comfrey plant, allantoin is produced synthetically for cosmetic products to ensure purity.
  13. 13Research shows it can encourage your skin cells to turn over and renew by stimulating keratinocyte and fibroblast proliferation.
  14. 14It also has mild keratolytic properties to help loosen and shed dead skin cells without being harsh.
  15. 15Studies also suggest allantoin can help calm inflammation by dialing down some of the chemical signals your skin sends out when it is irritated.
  16. 16This ingredient is typically used in the 0.1-0.5% range, and the FDA recognizes it as a skin protectant in OTC products up to 2%.
  17. 17Overall, allantoin is a wonderful addition to most routines; it is stable across a wide pH range (~4-8), works well with other ingredients, and is considered non-sensitizing/non-irritating.
  18. 18Fun fact: Allantoin is naturally occurring in comfrey root, beets, chamomile, and wheat sprouts. Our bodies even produce it as a byproduct of uric acid metabolism.
  19. 19Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
  20. 20Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Source · skinsort.com
02

Product index

Related product references

Product

Sunkissed skin Hyaluronic Acid Serum

Sunkissed skin Hyaluronic Acid Serum Sunkissed skin Hyaluronic Acid Serum ingredients explained: Water (Aqua, Eau)*, Glycerin*, Dipropylene Glycol, Xanthan Gum*, Phenoxyethanol, Sodium Hyal…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side

04

Ask the journal

Related questions

01How to Apply Face Serums

Skincare rules can get confusing, but when it comes to application the general rule of thumb is to pay attention to the product’s consistency. “Apply the lightest, thinnest product first and the heaviest, and more dense products last, since thinner products can’t penetrate thicker products,”says Dr. Lewis. After cleansing the face and following up with a toner, let the skin dry before using a serum. You can layer different serums on top of each other or opt for a product that has a precise mix of multiple hero ingredients, such as hyaluronic acid and vitamin C.

Source · www.skincare.com
02What Skin Types Should Use Hyaluronic Acid?

“Hyaluronic acid is particularly helpful for those experiencing dry skin, and for those desiring a plumping effect,” explains Dr. King. But, if you have an oily skin type, don’t discredit hyaluronic acid from your routine just yet. Despite the excess sebum that you may experience, it’s important to keep your skin hydrated so that it doesn’t overcompensate and produce even more oil as a result. Besides your skin type, you should also look at the condition of your skin to decide if it’s time to begin using hyaluronic acid. “If your skin is starting to look dull, flaky and you’re seeing more pronounced fine lines and wrinkles, that’s a pretty good indication that it’s time to add this ingredient to your routine,” adds O’Conner.

Source · www.skincare.com