Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Gold Bond Eczema Relief Skin Protectant Lotion Versus First Aid Beauty Ultra Repair Face Moisturizer

Gold Bond Eczema Relief Skin Protectant Lotion Versus First Aid Beauty Ultra Repair Face Moisturizer This barrier-repair moisturizer is formulated around Avena Sativa Kernel Flour and Squalane to strengthen the skin barrier and calm redness. What's inside Key

Gold Bond Eczema Relief Skin Protectant Lotion Versus First Aid Beauty Ultra Repair Face Moisturizer

This barrier-repair moisturizer is formulated around Avena Sativa Kernel Flour and Squalane to strengthen the skin barrier and calm redness.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Colloidal Oatmeal 2%

Water

Glycerin

Dimethicone

Petrolatum

Propanediol

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Jojoba Esters

Cetyl Alcohol

Aloe Barbadensis Leaf Juice

Glyceryl Stearate

Butyrospermum Parkii Butter Extract

Isohexadecane

Avena Sativa Kernel Extract

Bisabolol

Zingiber Officinale Root Extract

C10-30 Cholesterol/Lanosterol Esters

Ceramide Ng

Hydrolyzed Jojoba Esters

Tocopheryl Acetate

Magnesium Ascorbyl Phosphate

Panthenol

Ethylhexylglycerin

C12-15 Alkyl Benzoate

Tribehenin

Potassium Hydroxide

EDTA

Phenoxyethanol

PEG-10 Phytosterol

Methylparaben

Polysorbate 60

Palmitoyl Hexapeptide-12

Colloidal Oatmeal 2%, Water, Glycerin, Dimethicone, Petrolatum, Propanediol, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Jojoba Esters, Cetyl Alcohol, Aloe Barbadensis Leaf Juice, Glyceryl Stearate, Butyrospermum Parkii Butter Extract, Isohexadecane, Avena Sativa Kernel Extract, Bisabolol, Zingiber Officinale Root Extract, C10-30 Cholesterol/Lanosterol Esters, Ceramide Ng, Hydrolyzed Jojoba Esters, Tocopheryl Acetate, Magnesium Ascorbyl Phosphate, Panthenol, Ethylhexylglycerin, C12-15 Alkyl Benzoate, Tribehenin, Potassium Hydroxide, EDTA, Phenoxyethanol, PEG-10 Phytosterol, Methylparaben, Polysorbate 60, Palmitoyl Hexapeptide-12

Glyceryl Stearate Se

Caprylic/Capric Triglyceride

Urea

Avena Sativa Kernel Flour

Squalane

Caprylyl Glycol

Butyrospermum Parkii Butter

Allantoin

Persea Gratissima Oil

N-Butyl Alcohol

Carbomer

Chrysanthemum Parthenium Extract

Camellia Sinensis Leaf Extract

Glycyrrhiza Glabra Root Extract

Sodium Hydroxide

Ceramide NP

Leuconostoc/Radish Root Ferment Filtrate

Tetrasodium EDTA

Water, Glyceryl Stearate Se, Glycerin, Caprylic/Capric Triglyceride, Dimethicone, Urea, Cetyl Alcohol, Avena Sativa Kernel Flour, Squalane, Caprylyl Glycol, Butyrospermum Parkii Butter, Allantoin, Persea Gratissima Oil, N-Butyl Alcohol, Carbomer, Chrysanthemum Parthenium Extract, Camellia Sinensis Leaf Extract, Glycyrrhiza Glabra Root Extract, Sodium Hydroxide, Ceramide NP, Leuconostoc/Radish Root Ferment Filtrate, Phenoxyethanol, Tetrasodium EDTA

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Cetyl Alcohol is a fatty alcohol. Fatty Alcohols are most often used as an emollient or to thicken a product.

Its main roles are:

Though it has "alcohol" in the name, it is not related to denatured alcohol or ethyl alcohol.

The FDA allows products labeled "alcohol-free" to have fatty alcohols.

This ingredient may not be fungal acne safe. It is a primary fatty alcohol with a chain length above 12 carbons. A study from 2019 show Malassezia can feed on fatty alcohols in this range, so it may trigger fungal acne in those prone to it.

Dimethicone is a type of synthetic silicone created from natural materials such as quartz. It is also known as polydimethylsiloxane.

What it does:

Dimethicone comes in different viscosities:

Depending on the viscosity, dimethicone has different properties.

Ingredients lists don't always show which type is used, so we recommend reaching out to the brand if you have questions about the viscosity.

This ingredient is unlikely to cause irritation because it does not get absorbed into skin. However, people with silicone allergies should be careful about using this ingredient.

Note: Dimethicone may contribute to pilling. This is because it is not oil or water soluble, so pilling may occur when layered with products. When mixed with heavy oils in a formula, the outcome is also quite greasy.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.
  4. 04Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.
  5. 05In practice, that translates to a long shelf life and a consistently elegant skin feel.
  6. 06While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.
  7. 07Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.
  8. 08This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.
  9. 09This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures…
  10. 10Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.
  11. 11Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.
  12. 12It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.
  13. 13Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.
  14. 14A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.
  15. 15Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  16. 16Topically, glycerin does several things at once:
  17. 17Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
  18. 18Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
  19. 19This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
  20. 20Just know very high concentrations (>40%) can feel tacky in low humidity.
Source · skinsort.com
02

Product index

Related product references

Product

First Aid Beauty 5 In 1 Eye Cream

First Aid Beauty 5 In 1 Eye Cream First Aid Beauty 5 In 1 Eye Cream ingredients explained: Water, Glycerin, Dimethicone, C12-15 Alkyl Benzoate, Sodium Polyacrylate, Ethylhexyl Palmitate, Si…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side