Skin science article
Good Molecules Glycolic Exfoliating Toner Versus Paula's Choice Skin Balancing Pore-Reducing Toner
Good Molecules Glycolic Exfoliating Toner Versus Paula's Choice Skin Balancing Pore-Reducing Toner This smoothing toner is formulated around Glycolic Acid and Salicylic Acid to refine skin texture and brighten dull-looking skin. This pore-care toner is formula
Good Molecules Glycolic Exfoliating Toner Versus Paula's Choice Skin Balancing Pore-Reducing Toner
This smoothing toner is formulated around Glycolic Acid and Salicylic Acid to refine skin texture and brighten dull-looking skin.
This pore-care toner is formulated around Niacinamide and Panthenol to refine the look of pores and balance excess oil.
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Dipropylene Glycol
Glycolic Acid
Propanediol
Sodium Citrate
1,2-Hexanediol
Glycerin
Galactomyces Ferment Filtrate
Whey Filtrate
Butylene Glycol
Salicylic Acid
Aloe Barbadensis Leaf Extract
Pentylene Glycol
Niacinamide
Tricholoma Matsutake Extract
Ethylhexylglycerin
Hydrolyzed Cicer Seed Extract
Rhododendron Chrysanthum Leaf Extract
Trisodium Ethylenediamine Disuccinate
Sodium Hyaluronate
Hyaluronic Acid
Hydrolyzed Hyaluronic Acid
Water, Dipropylene Glycol, Glycolic Acid, Propanediol, Sodium Citrate, 1,2-Hexanediol, Glycerin, Galactomyces Ferment Filtrate, Whey Filtrate, Butylene Glycol, Salicylic Acid, Aloe Barbadensis Leaf Extract, Pentylene Glycol, Niacinamide, Tricholoma Matsutake Extract, Ethylhexylglycerin, Hydrolyzed Cicer Seed Extract, Rhododendron Chrysanthum Leaf Extract, Trisodium Ethylenediamine Disuccinate, Sodium Hyaluronate, Hyaluronic Acid, Hydrolyzed Hyaluronic Acid
Polysorbate 20
Adenosine
Anthemis Nobilis Flower Extract
Arctium Lappa Seed Oil
Hydrolyzed Jojoba Esters
Sodium PCA
Panthenol
Ceramide NP
Ceramide AP
Ceramide EOP
Phytosphingosine
Cholesterol
Tetrahexyldecyl Ascorbate
Oleth-10
Sodium Lauroyl Lactylate
Caprylyl Glycol
Hexylene Glycol
Xanthan Gum
Trisodium EDTA
Phenoxyethanol
Water, Glycerin, Butylene Glycol, Niacinamide, Polysorbate 20, Adenosine, Anthemis Nobilis Flower Extract, Arctium Lappa Seed Oil, Hydrolyzed Jojoba Esters, Sodium PCA, Panthenol, Sodium Hyaluronate, Ceramide NP, Ceramide AP, Ceramide EOP, Phytosphingosine, Cholesterol, Tetrahexyldecyl Ascorbate, Oleth-10, Sodium Lauroyl Lactylate, Caprylyl Glycol, Hexylene Glycol, Sodium Citrate, Xanthan Gum, Trisodium EDTA, Phenoxyethanol
Reviews
Alternatives
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Niacinamide is a multitasking form of vitamin B3 that strengthens the skin barrier, reduces pores and dark spots, regulates oil, and improves signs of aging.
And the best part? It's gentle and well-tolerated by most skin types, including sensitive and reactive skin.
You might have heard of "niacin flush", or the reddening of skin that causes itchiness. Niacinamide has not been found to cause this.
In very rare cases, some individuals may not be able to tolerate niacinamide at all or experience an allergic reaction to it.
If you are experiencing flaking, irritation, and dryness with this ingredient, be sure to double check all your products as this ingredient can be found in all categories of skincare.
When incorporating niacinamide into your routine, look out for concentration amounts. Typically, 5% niacinamide provides benefits such as fading dark spots. However, if you have sensitive skin, it is better to begin with a smaller concentration.
When you apply niacinamide to your skin, your body converts it into nicotinamide adenine dinucleotide (NAD). NAD is an essential coenzyme that is already found in your cells as "fuel" and powers countless biological processes.
In your skin, NAD helps repair cell damage, produce new healthy cells, support collagen production, strengthen the skin barrier, and fight environmental stressors (like UV and pollution).
Our natural NAD levels start to decline with age, leading to slower skin repair, visible aging, and a weaker skin barrier. By providing your skin niacinamide, you're recharging your skin's NAD levels. This leads to stronger, healthier, and younger looking skin.
Another name for vitamin B3 is nicotinamide. This vitamin is water-soluble and our bodies don't store it. We obtain Vitamin B3 from either food or skincare. Meat, fish, wheat, yeast, and leafy greens contain vitamin B3.
The type of niacinamide used in skincare is synthetically created.
Sodium Citrate is the sodium salts of citric acid. In skincare, it is used to alter pH levels and acts as a preservative.
Its main functions are to maintain the pH of a product and neutralize metal ions.
The acidity of our skin is maintained by our glands and skin biome; normal pH level of skin is slightly acidic (~4.75-5.5).
Being slightly acidic allows our skin to create an "acid mantle". This acid mantle is a thin barrier that protects our skin from bacteria and contaminants.
Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!