IMAGE skincare Vital C Hydrating Anti-Aging Serum Versus Peter Thomas Roth Potent-C Power Serum

IMAGE skincare Vital C Hydrating Anti-Aging Serum Versus Peter Thomas Roth Potent-C Power Serum

This hydrating serum is formulated around Aloe Barbadensis Leaf Juice and Magnesium Ascorbyl Phosphate to hydrate skin.

This brightening serum is formulated around Tetrahexyldecyl Ascorbate and Tocopheryl Acetate to brighten dull-looking skin and soften the look of wrinkles.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Aloe Barbadensis Leaf Juice

Water

Glycerin

Citrus Aurantium Dulcis Oil

Caprylic/Capric Triglyceride

Limonene

C12-15 Alkyl Benzoate

Cetearyl Olivate

Sorbitan Olivate

Imperata Cylindrica Root Extract

Magnesium Ascorbyl Phosphate

PPG-12/Smdi Copolymer

Tetrahexyldecyl Ascorbate

Glyceryl Stearate

PEG-100 Stearate

Cetyl Alcohol

Dimethicone

Di-PPG-2 Myreth-10 Adipate

Stearic Acid

Phenoxyethanol

Ethylhexyl Methoxycinnamate

Panthenol

Prunus Amygdalus Dulcis Oil

Xanthan Gum

Caprylyl Glycol

Butylene Glycol

Tocopheryl Acetate

Glycine Soja Sterols

Linoleic Acid

Phospholipids

Simmondsia Chinensis Seed Oil

Squalene

Propylene Glycol

Ethylhexylglycerin

Glucosamine Hcl

Hexylene Glycol

Linoleamidopropyl Pg-Dimonium Chloride Phosphate

PEG-8

Pisum Sativum Extract

Citrus Nobilis Peel Oil

Dipotassium Glycyrrhizate

Phyllanthus Emblica Fruit Extract

Stearyl Glycyrrhetinate

Bambusa Vulgaris Leaf/Stem Extract

Tocopherol

Magnesium Aluminum Silicate

Olea Europaea Leaf Extract

Disodium EDTA

Eugenia Caryophyllus Leaf Oil

Yeast Polysaccharides

Sodium Hyaluronate

Glyceryl Polymethacrylate

Carbomer

Eugenol

Ascorbyl Palmitate

Citric Acid

Benzoic Acid

Camellia Sinensis Leaf Extract

Ascorbic Acid

Sodium Lactate

Polysorbate 20

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Spiraea Ulmaria Flower Extract

Taurine

Corallina Officinalis Extract

Vitis Vinifera Seed Extract

Centella Asiatica Flower/Leaf/Stem Extract

Centella Asiatica Extract

Potassium Sorbate

BHT

Acetyl Hexapeptide-8

Darutoside

Palmitoyl Pentapeptide-4

Arginine

Leucine

Lysine

Sodium Benzoate

Valine

Palmitoyl Tripeptide-1

Aloe Barbadensis Leaf Juice, Water, Glycerin, Citrus Aurantium Dulcis Oil, Caprylic/Capric Triglyceride, Limonene, C12-15 Alkyl Benzoate, Cetearyl Olivate, Sorbitan Olivate, Imperata Cylindrica Root Extract, Magnesium Ascorbyl Phosphate, PPG-12/Smdi Copolymer, Tetrahexyldecyl Ascorbate, Glyceryl Stearate, PEG-100 Stearate, Cetyl Alcohol, Dimethicone, Di-PPG-2 Myreth-10 Adipate, Stearic Acid, Phenoxyethanol, Ethylhexyl Methoxycinnamate, Panthenol, Prunus Amygdalus Dulcis Oil, Xanthan Gum, Caprylyl Glycol, Butylene Glycol, Tocopheryl Acetate, Glycine Soja Sterols, Linoleic Acid, Phospholipids, Simmondsia Chinensis Seed Oil, Squalene, Propylene Glycol, Ethylhexylglycerin, Glucosamine Hcl, Hexylene Glycol, Linoleamidopropyl Pg-Dimonium Chloride Phosphate, PEG-8, Pisum Sativum Extract, Citrus Nobilis Peel Oil, Dipotassium Glycyrrhizate, Phyllanthus Emblica Fruit Extract, Stearyl Glycyrrhetinate, Bambusa Vulgaris Leaf/Stem Extract, Tocopherol, Magnesium Aluminum Silicate, Olea Europaea Leaf Extract, Disodium EDTA, Eugenia Caryophyllus Leaf Oil, Yeast Polysaccharides, Sodium Hyaluronate, Glyceryl Polymethacrylate, Carbomer, Eugenol, Ascorbyl Palmitate, Citric Acid, Benzoic Acid, Camellia Sinensis Leaf Extract, Ascorbic Acid, Sodium Lactate, Polysorbate 20, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Spiraea Ulmaria Flower Extract, Taurine, Corallina Officinalis Extract, Vitis Vinifera Seed Extract, Centella Asiatica Flower/Leaf/Stem Extract, Centella Asiatica Extract, Potassium Sorbate, BHT, Acetyl Hexapeptide-8, Darutoside, Palmitoyl Pentapeptide-4, Arginine, Leucine, Lysine, Sodium Benzoate, Valine, Palmitoyl Tripeptide-1

C9-12 Alkane

Caprylyl Methicone

C10-18 Triglycerides

Polyglyceryl-6 Distearate

Ferulic Acid

Squalane

Hydrogenated Lecithin

Propanediol

Zingiber Officinale Root Extract

Curcuma Longa Root Extract

Panax Ginseng Root Extract

Jojoba Esters

Leuconostoc/Radish Root Ferment Filtrate

Coco-Caprylate/Caprate

Polyglyceryl-3 Beeswax

Mica

Water, Tetrahexyldecyl Ascorbate, Butylene Glycol, C9-12 Alkane, Caprylyl Methicone, Tocopheryl Acetate, C10-18 Triglycerides, Polyglyceryl-6 Distearate, Ferulic Acid, Squalane, Hydrogenated Lecithin, Propanediol, Sodium Hyaluronate, Zingiber Officinale Root Extract, Curcuma Longa Root Extract, Panax Ginseng Root Extract, Jojoba Esters, Leuconostoc/Radish Root Ferment Filtrate, Coco-Caprylate/Caprate, Glycerin, Cetyl Alcohol, Polyglyceryl-3 Beeswax, Xanthan Gum, Disodium EDTA, Mica, Ethylhexylglycerin, Potassium Sorbate, Sodium Benzoate, Phenoxyethanol

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Cetyl Alcohol is a fatty alcohol. Fatty Alcohols are most often used as an emollient or to thicken a product.

Its main roles are:

Though it has "alcohol" in the name, it is not related to denatured alcohol or ethyl alcohol.

The FDA allows products labeled "alcohol-free" to have fatty alcohols.

This ingredient may not be fungal acne safe. It is a primary fatty alcohol with a chain length above 12 carbons. A study from 2019 show Malassezia can feed on fatty alcohols in this range, so it may trigger fungal acne in those prone to it.

Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.

This ingredient mainly works behind the scenes and helps with:

On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.

One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too strong if you have sensitive skin).

Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.

You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Potassium Sorbate is a preservative used to prevent yeast and mold in products. It is commonly found in both cosmetic and food products.

This ingredient comes from potassium salt derived from sorbic acid. Sorbic acid is a natural antibiotic and effective against fungus.

Both potassium sorbate and sorbic acid can be found in baked goods, cheeses, dried meats, dried fruit, ice cream, pickles, wine, yogurt, and more.

You'll often find this ingredient used with other preservatives.

Sodium Benzoate is a preservative. It's used in both cosmetic and food products to inhibit the growth of mold and bacteria. It is typically produced synthetically.

Both the US FDA and EU Health Committee have approved the use of sodium benzoate. In the US, levels of 0.1% (of the total product) are allowed.

Sodium benzoate works as a preservative by inhibiting the growth of bacteria inside of cells. It prevents the cell from fermenting a type of sugar using an enzyme called phosphofructokinase.

It is the salt of benzoic acid. Foods containing sodium benzoate include soda, salad dressings, condiments, fruit juices, wines, and snack foods.

Studies for using ascorbic acid and sodium benzoate in cosmetics are lacking, especially in skincare routines with multiple steps.

We always recommend speaking with a professional, such as a dermatologist, if you have any concerns.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Tetrahexyldecyl Ascorbate (THD) is a stable and oil-soluble form of Vitamin C.

THD is special in that it has the ability to travel deeper into skin than traditional ascorbic acid while maintaining the same skin benefits (double win!).

Because it’s oil-soluble, THD dives deep into your skin’s fatty layers (think ceramides and cholesterol) to fight off the kind of free radicals that mess with your skin barrier. This makes it a great pair with water-based vitamin C (ascorbic acid) that mainly works on the surface.

Even at just 0.1%, THD is already showing great antioxidant activity. When used up to 2%, it helps keep your skin happy and calm, especially when it’s stressed from pollution or sun.

Want to fade dark spots or tackle hyperpigmentation? You’ll want 5% or more. Pairing it with brightening buddies like niacinamide or licorice root gives even better results. One study even used 30% THD with other brighteners and saw real results on stubborn discoloration, even in melasma-prone skin.

A note on THD: It’s has a slightly silky, oily texture and usually shows up colorless or pale yellow (though the exact shade can vary by supplier).

While you can sneak it into water-based formulas, it really shines when paired with silicones or oils, which help your skin soak it up better.

THD is pretty stable, but it’s still vulnerable to degradation like ascorbic acid. Too much light or heat (above 113°F / 45°C) can break it down over time. Go for dark and opaque packaging that keeps it safe and shady!

Read more about other types of Vitamin C:

Tocopheryl Acetate is a stable, shelf-friendly form of vitamin E.

Formulators love it because plain vitamin E oxidizes quickly once it hits air. This acetate version stays stable and resists going off, helping to extend a product's shelf life.

It's actually inactive on its own and works like a slow-release "storage" form; the enzymes in your skin called esterases gradually convert it into active vitamin E over time.

One in vivo study showed 5% of the acetate in the living layer of the epidermis converted to vitamin E after 5 days of application. This study also found the skin gained protection against UV damage even though the conversion was slow and small.

Once converted, vitamin E acts as a skin's main fat-soluble antioxidant that fights free radicals to protect skin from damage.

Topical vitamin E generally boosts the skin's photoprotection, and it reduced UV-damage in animal models.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

Overall, it has a pretty solid safety profile and has been found to be non-irritating and non-comedogenic. Allergic reactions may happen but stay rare due to how widely the ingredient gets used.

The concentration will vary depending on the formula; industry data shows 0.1% in baby lotions, 3% in lipsticks, and 5% in foot powders. You can also find this ingredient at 100% in a pure vitamin E oil.

Most leave-on skincare keeps it at the lower end, often between 0.5-1%.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons