Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Isntree Ultra-Low Molecular Hyaluronic Acid Serum Versus COSRX Hydrium Centella Aqua Soothing Ampoule

Isntree Ultra-Low Molecular Hyaluronic Acid Serum Versus COSRX Hydrium Centella Aqua Soothing Ampoule This hydrating serum is formulated around Panthenol and Hydrolyzed Hyaluronic Acid to hydrate skin and strengthen the skin barrier. This calming ampoule is fo

Isntree Ultra-Low Molecular Hyaluronic Acid Serum Versus COSRX Hydrium Centella Aqua Soothing Ampoule

This hydrating serum is formulated around Panthenol and Hydrolyzed Hyaluronic Acid to hydrate skin and strengthen the skin barrier.

This calming ampoule is formulated around Centella Asiatica Extract and Madecassoside to calm redness and hydrate skin.

What's inside

Key Ingredients

Benefits

Ingredients Side-by-side

Sea Water

Water

Methylpropanediol

Glycerin

Butylene Glycol

1,2-Hexanediol

Betaine

Pentylene Glycol

Carbomer

Caprylyl Glycol

Allantoin

Tromethamine

Ethylhexylglycerin

Xanthan Gum

Panthenol

Malachite Extract

Hydrolyzed Hyaluronic Acid

Disodium EDTA

Glyceryl Acrylate/Acrylic Acid Copolymer

Glyceryl Glucoside

Sodium Hyaluronate

Potassium Hyaluronate

Hyaluronic Acid

Hydrolyzed Sodium Hyaluronate

Sodium Acetylated Hyaluronate

Hydroxypropyltrimonium Hyaluronate

Sodium Hyaluronate Crosspolymer

Dimethylsilanol Hyaluronate

Hydrolyzed Calcium Hyaluronate

Sodium Sulfated Hyaluronate

Madecassoside

Beta-Glucan

Sodium Stearoyl Hyaluronate

Sodium Oleoyl Hyaluronate

Sea Water, Water, Methylpropanediol, Glycerin, Butylene Glycol, 1,2-Hexanediol, Betaine, Pentylene Glycol, Carbomer, Caprylyl Glycol, Allantoin, Tromethamine, Ethylhexylglycerin, Xanthan Gum, Panthenol, Malachite Extract, Hydrolyzed Hyaluronic Acid, Disodium EDTA, Glyceryl Acrylate/Acrylic Acid Copolymer, Glyceryl Glucoside, Sodium Hyaluronate, Potassium Hyaluronate, Hyaluronic Acid, Hydrolyzed Sodium Hyaluronate, Sodium Acetylated Hyaluronate, Hydroxypropyltrimonium Hyaluronate, Sodium Hyaluronate Crosspolymer, Dimethylsilanol Hyaluronate, Hydrolyzed Calcium Hyaluronate, Sodium Sulfated Hyaluronate, Madecassoside, Beta-Glucan, Sodium Stearoyl Hyaluronate, Sodium Oleoyl Hyaluronate

Centella Asiatica Extract

Dipropylene Glycol

Chondrus Crispus Extract

Saccharum Officinarum Extract

Octanediol

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Water, Centella Asiatica Extract, Dipropylene Glycol, Glycerin, 1,2-Hexanediol, Betaine, Chondrus Crispus Extract, Saccharum Officinarum Extract, Pentylene Glycol, Octanediol, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Xanthan Gum, Ethylhexylglycerin, Allantoin, Madecassoside, Panthenol

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.

It is a:

Humectant, drawing moisture into the skin

Emollient, helping to soften skin

Solvent, dispersing and stabilizing formulas

Preservative booster, enhancing the antimicrobial activity of other preservatives

Allantoin is a soothing ingredient known for its protective and moisturizing properties; it's basically a quiet workhorse ingredient you can find in a huge range of cosmetics.

Though it can be derived from the comfrey plant, allantoin is produced synthetically for cosmetic products to ensure purity.

Research shows it can encourage your skin cells to turn over and renew by stimulating keratinocyte and fibroblast proliferation.

It also has mild keratolytic properties to help loosen and shed dead skin cells without being harsh.

Studies also suggest allantoin can help calm inflammation by dialing down some of the chemical signals your skin sends out when it is irritated.

This ingredient is typically used in the 0.1-0.5% range, and the FDA recognizes it as a skin protectant in OTC products up to 2%.

Overall, allantoin is a wonderful addition to most routines; it is stable across a wide pH range (~4-8), works well with other ingredients, and is considered non-sensitizing/non-irritating.

Fun fact: Allantoin is naturally occurring in comfrey root, beets, chamomile, and wheat sprouts. Our bodies even produce it as a byproduct of uric acid metabolism.

Betaine is a humectant. Like hyaluronic acid, it helps attract and retain moisture in the skin. It’s known for being gentle and for helping the skin maintain balanced hydration.

Betaine is mainly used to improve hydration and support calmer skin. It helps skin cells regulate water balance because it functions as an osmolyte.

Some studies suggest betaine may support making skin tone more even.

Fun fact: Betaine naturally exists in the skin and the body. In cosmetic products, it can be either plant-derived (most commonly from sugar beets) or synthetically produced for consistency and stability.

Betaine is also known as trimethylglycine.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Madecassoside is one of four active compounds found in Centella asiatica and is one of the main reasons Centella is so effective at calming irritated skin and supporting the moisture barrier.

There's a solid body of peer-reviewed research backing Madecassoside for several skin benefits. Studies have found:

Madecassoside pairs well with other hydrating or antioxidant ingredients like Ascorbic Acid or Hyaluronic Acid.

Panthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.

There are two forms of panthenol: D and L.

D-panthenol is also known as dexpanthenol. Most cosmetics use dexpanthenol or a mixture of D and L-panthenol.

Panthenol is famous due to its ability to go deeper into the skin's layers. Using this ingredient has numerous pros (and no cons):

Like hyaluronic acid, panthenol is a humectant. Humectants are able to bind and hold large amounts of water to keep skin hydrated.

This ingredient works well for wound healing. It works by increasing tissue in the wound and helps close open wounds.

Once oxidized, panthenol converts to pantothenic acid. Panthothenic acid is found in all living cells.

This ingredient is also referred to as pro-vitamin B5.

Pentylene Glycol (1,2-pentanediol) is a multitasking little diol with three main roles in a formula:

Research on alkanediols (the family pentylene glycol belongs to) show they work by disrupting microbial cell membranes. This disruption helps the primary preservative system in a product work more effectively at lower doses.

On the safety side, the Cosmetic Ingredient Review Expert Panel has concluded this ingredient to be safe as used in current cosmetic practices + concentrations.

Typical use levels in a formula run about 1-5%.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  4. 04Topically, glycerin does several things at once:
  5. 05Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
  6. 06Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
  7. 07This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
  8. 08Just know very high concentrations (>40%) can feel tacky in low humidity.
  9. 09Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
  10. 10Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
  11. 11It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
  12. 12On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.
  13. 13Another perk of this ingredient is that it stays functional across a wide pH range (3-10).
  14. 14You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.
  15. 15Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.
  16. 16Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.
  17. 17Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.
  18. 18Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
  19. 19In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
  20. 20Interestingly, the size of the molecule affects its behavior:
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side

04

Ask the journal

Related questions

01When and How to Use Hyaluronic Acid in Your Routine

Products with hyaluronic acid can be used in the morning or at night (or both!). Applying the hydrating ingredient at night will restore your skin’s resilience while you sleep, and applying it in the morning will leave your skin feeling plump, hydrated and ready for makeup. Hyaluronic acid is great at providing topical hydration when it’s introduced into a balanced skincare routine. According to Dr. King, it’s important to pair your hyaluronic acid products with an emollient or occlusive moisturizer to lock in hydration.

Source · www.skincare.com
02Is Serum Good for All Skin Types?

Serums are a form of skincare that can be added to any routine no matter what your skin type is. All skin types can benefit from the use of a serum since there are so many different formulations that can target specific skincare concerns. “Serums are used for hydration,to aid [or] maintain the skin barrier, or treat skin issues like acne or rosacea,” says Dr. Lewis. The type of serum that you may use should depend on the skin issue you’re trying to target. Think of serums as a treatment for the skin. “Some serums can reverse damage and help prevent free radicals that cause the signs of aging skin,” adds Dr. Lewis.

Source · www.skincare.com