Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Medik8 Liquid Peptides Advanced MP Versus Biologique Recherche Elastine Sérum Authentique

Medik8 Liquid Peptides Advanced MP Versus Biologique Recherche Elastine Sérum Authentique This anti-aging serum is formulated around Palmitoyl Tripeptide-38 and Palmitoyl Tripeptide-5 to soften the look of wrinkles and refine skin texture. This anti-aging seru

Medik8 Liquid Peptides Advanced MP Versus Biologique Recherche Elastine Sérum Authentique

This anti-aging serum is formulated around Palmitoyl Tripeptide-38 and Palmitoyl Tripeptide-5 to soften the look of wrinkles and refine skin texture.

This anti-aging serum is formulated around Palmitoyl Oligopeptide and Palmitoyl Hexapeptide-12 to soften the look of wrinkles and hydrate skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Glycerin

Dimethicone

Dimethyl Isosorbide

Butylene Glycol

Undecane

Arginine

Inulin

Microcrystalline Cellulose

Ceteareth-20

Tridecane

Tocopherol

Hydroxyacetophenone

Sodium Hyaluronate

Palmitoyl Tripeptide-38

Panthenol

Caprylic/Capric Triglyceride

Palmitoyl Tripeptide-5

Polyacrylate Crosspolymer-6

Palmitoyl Tripeptide-1

Pullulan

Tetrapeptide-21

Palmitoyl Tetrapeptide-10

Palmitoyl Tetrapeptide-7

Ammonium Polyacryloyldimethyl Taurate

Glyceryl Linoleate

Acetyl Hexapeptide-8

Pentapeptide-18

Oligopeptide-1

Arginine/Lysine Polypeptide

Sucrose Palmitate

Cetyl Palmitate

Phenoxyethanol

Ethylhexylglycerin

Carbomer

Copper Palmitoyl Heptapeptide-14

Heptapeptide-15 Palmitate

Benzotriazolyl Dodecyl P-Cresol

Polysorbate 80

Sorbitan Stearate

Polysorbate 20

Carnosine

Sodium Metabisulfite

Dunaliella Salina Extract

Helianthus Annuus Seed Oil

Hydroxypropyl Cyclodextrin

Dimethicone/Vinyl Dimethicone Crosspolymer

Sodium Benzoate

Hydrogenated Lecithin

Caprylyl Glycol

Pantolactone

Xanthan Gum

Disodium EDTA

T-Butyl Alcohol

Potassium Sorbate

Citric Acid

Glyceryl Caprylate

Lactic Acid/Glycolic Acid Copolymer

Polyvinyl Alcohol

Phenylpropanol

Water, Glycerin, Dimethicone, Dimethyl Isosorbide, Butylene Glycol, Undecane, Arginine, Inulin, Microcrystalline Cellulose, Ceteareth-20, Tridecane, Tocopherol, Hydroxyacetophenone, Sodium Hyaluronate, Palmitoyl Tripeptide-38, Panthenol, Caprylic/Capric Triglyceride, Palmitoyl Tripeptide-5, Polyacrylate Crosspolymer-6, Palmitoyl Tripeptide-1, Pullulan, Tetrapeptide-21, Palmitoyl Tetrapeptide-10, Palmitoyl Tetrapeptide-7, Ammonium Polyacryloyldimethyl Taurate, Glyceryl Linoleate, Acetyl Hexapeptide-8, Pentapeptide-18, Oligopeptide-1, Arginine/Lysine Polypeptide, Sucrose Palmitate, Cetyl Palmitate, Phenoxyethanol, Ethylhexylglycerin, Carbomer, Copper Palmitoyl Heptapeptide-14, Heptapeptide-15 Palmitate, Benzotriazolyl Dodecyl P-Cresol, Polysorbate 80, Sorbitan Stearate, Polysorbate 20, Carnosine, Sodium Metabisulfite, Dunaliella Salina Extract, Helianthus Annuus Seed Oil, Hydroxypropyl Cyclodextrin, Dimethicone/Vinyl Dimethicone Crosspolymer, Sodium Benzoate, Hydrogenated Lecithin, Caprylyl Glycol, Pantolactone, Xanthan Gum, Disodium EDTA, T-Butyl Alcohol, Potassium Sorbate, Citric Acid, Glyceryl Caprylate, Lactic Acid/Glycolic Acid Copolymer, Polyvinyl Alcohol, Phenylpropanol

Propylene Glycol

Pentylene Glycol

Glyceryl Polymethacrylate

Alteromonas Ferment Extract

Equisetum Arvense Extract

Sodium Hyaluronate Crosspolymer-3

Palmitoyl Oligopeptide

Palmitoyl Hexapeptide-12

Acacia Senegal Gum

PEG-8

Sodium Lactate

Caprylhydroxamic Acid

Triethanolamine

Isopropyl Alcohol

Methylpropanediol

Water, Propylene Glycol, Glycerin, Pentylene Glycol, Glyceryl Polymethacrylate, Butylene Glycol, Alteromonas Ferment Extract, Equisetum Arvense Extract, Sodium Hyaluronate Crosspolymer-3, Palmitoyl Oligopeptide, Palmitoyl Hexapeptide-12, Palmitoyl Tetrapeptide-7, Acacia Senegal Gum, Carbomer, PEG-8, Sodium Lactate, Caprylhydroxamic Acid, Xanthan Gum, Polysorbate 20, Triethanolamine, Isopropyl Alcohol, Ethylhexylglycerin, Methylpropanediol, Phenoxyethanol

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.

Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.

It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.

Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.

A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Palmitoyl Tetrapeptide-7 (formerly Palmitoyl Tetrapeptide-3) is a synthetic peptide. Its main job is to fight what researchers call "inflammaging".

"Inflammaging" is the slow, low-grade chronic inflammation that quietly breaks down collagen as we age.

This ingredient calms down a specific inflammation signal in your skin cells (called IL-6). When left unchecked, this signal triggers enzymes that break down collagen and elastin.

Clinical testing showed statistically significant improvements in:

Studies also found the more of this ingredient used, the more your skin produces Collagen I, fibronectin, and hyaluronic acid.

You'll likely see this ingredient paired with Palmitoyl Tripeptide-1 in the well-known Matrixyl 3000 complex for enhanced anti-aging effects.

A 3% concentration applied twice daily for two months showed meaningful skin rejuvenation results in clinical panels.

Fungal acne note: Usually a palmitic acid component can feed Malassezia in unbound form, but here is is covalently bonded to the peptide. This means it is very difficult for Malassezia to access, and therefore very unlikely to cause fungal acne.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Polysorbate 20 is a gentle, water-soluble emulsifier and mild surfactant. It stops oil and water from separating to keep your formulas blended and stable.

It also acts as a mild penetration enhancer by helping active ingredients absorb slightly better.

The common safety discussion around this ingredient involves a manufacturing byproduct called 1,4-dioxane.

Trace amounts can form during production but the EU's Scientific Committee on Consumer Safety has concluded that levels at/below 10 ppm in finished products are safe (commercial products consistently fall within acceptable margins).

True allergic reactions are uncommon and the CIR Expert Panel has confirmed this ingredient to be safe as used in cosmetics.

Because it is derived from lauric acid, it may not be fungal acne safe.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Water
  2. 02Glycerin
  3. 03Dimethicone
  4. 04Dimethyl Isosorbide
  5. 05Butylene Glycol
  6. 06Undecane
  7. 07Arginine
  8. 08Inulin
  9. 09Microcrystalline Cellulose
  10. 10Ceteareth-20
  11. 11Tridecane
  12. 12Tocopherol
  13. 13Hydroxyacetophenone
  14. 14Sodium Hyaluronate
  15. 15Palmitoyl Tripeptide-38
  16. 16Panthenol
  17. 17Caprylic/Capric Triglyceride
  18. 18Palmitoyl Tripeptide-5
  19. 19Polyacrylate Crosspolymer-6
  20. 20Palmitoyl Tripeptide-1
Source · skinsort.com
02

Product index

Related product references

Product

Medik8 Liquid Peptides Advanced MP

Medik8 Liquid Peptides Advanced MP Ingredients in Medik8 Liquid Peptides Advanced MP explained: benefits, concerns, and detailed analysis of 60 ingredients including Water, Glycerin, and Di…

Source: skinsort.comView reference →

Product

Medik8 Liquid Peptides Advanced Mp

Medik8 Liquid Peptides Advanced Mp Medik8 Liquid Peptides Advanced Mp ingredients explained: Aqua (Water), Glycerin, Dimethicone, Dimethyl Isosorbide, Butylene Glycol, Undecane, Arginine, I…

Source: incidecoder.comView reference →

Product

Medik8 Liquid Peptides (2021)

Medik8 Liquid Peptides (2021) Medik8 Liquid Peptides (2021) ingredients explained: Aqua (Water), Glycerin, Butylene Glycol, Inulin, Sodium Hyaluronate, Panthenol, Alpha-Glucan Oligosacchari…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side