Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Naturium Skin Soothing Recovery Lotion Versus Naturium Multi-Peptide Moisturizer

Naturium Skin Soothing Recovery Lotion Versus Naturium Multi-Peptide Moisturizer This calming moisturizer is formulated around Aloe Barbadensis Leaf Juice and Squalane to calm redness and strengthen the skin barrier. This anti-aging moisturizer is formulated a

Naturium Skin Soothing Recovery Lotion Versus Naturium Multi-Peptide Moisturizer

This calming moisturizer is formulated around Aloe Barbadensis Leaf Juice and Squalane to calm redness and strengthen the skin barrier.

This anti-aging moisturizer is formulated around Palmitoyl Tripeptide-5 and Palmitoyl Tripeptide-1 to soften the look of wrinkles.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Ethylhexyl Olivate

Caprylic/Capric Triglyceride

Glycerin

Cetearyl Alcohol

Althaea Officinalis Root

Aloe Barbadensis Leaf Juice

Squalane

Hydrolyzed Ceratonia Siliqua Seed Extract

Sorbitan Oleate

Beta-Glucan

Arnica Montana Flower Extract

Aloe Barbadensis Flower Extract

Phenoxyethanol

Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Melia Azadirachta Flower Extract

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Polyisobutene

Hydrogenated Lecithin

Caprylyl/Capryl Glucoside

Melia Azadirachta Leaf Extract

Coccinia Indica Fruit Extract

Corallina Officinalis Extract

Algin

Xanthan Gum

Solanum Melongena Fruit Extract

Curcuma Longa Root Extract

Ocimum Basilicum Flower/Leaf Extract

Ocimum Sanctum Leaf Extract

Potassium Sorbate

Sodium Phytate

Benzoic Acid

Sorbic Acid

Sodium Benzoate

Ethylhexylglycerin

Citric Acid

Water, Ethylhexyl Olivate, Caprylic/Capric Triglyceride, Glycerin, Cetearyl Alcohol, Althaea Officinalis Root, Aloe Barbadensis Leaf Juice, Squalane, Hydrolyzed Ceratonia Siliqua Seed Extract, Sorbitan Oleate, Beta-Glucan, Arnica Montana Flower Extract, Aloe Barbadensis Flower Extract, Phenoxyethanol, Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Melia Azadirachta Flower Extract, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Polyisobutene, Hydrogenated Lecithin, Caprylyl/Capryl Glucoside, Melia Azadirachta Leaf Extract, Coccinia Indica Fruit Extract, Corallina Officinalis Extract, Algin, Xanthan Gum, Solanum Melongena Fruit Extract, Curcuma Longa Root Extract, Ocimum Basilicum Flower/Leaf Extract, Ocimum Sanctum Leaf Extract, Potassium Sorbate, Sodium Phytate, Benzoic Acid, Sorbic Acid, Sodium Benzoate, Ethylhexylglycerin, Citric Acid

Dimethicone

Simmondsia Chinensis Seed Oil

Glyceryl Stearate

Cetyl Alcohol

Niacinamide

Stearyl Alcohol

Palmitoyl Tripeptide-5

Pantolactone

Palmitoyl Tripeptide-1

Palmitoyl Tetrapeptide-7

Hydrolyzed Plukenetia Volubilis Seed Extract

Dunaliella Salina Extract

Sodium Hyaluronate

3-O-Ethyl Ascorbic Acid

Panthenol

Caryodendron Orinocense Seed Oil

Honokiol

Magnolol

Palmitic Acid

Aluminum Starch Octenylsuccinate

Hydroxyacetophenone

Stearic Acid

Acrylamide/Sodium Acryloyldimethyltaurate Copolymer

Polyglyceryl-6 Laurate

1,2-Hexanediol

Boron Nitride

Caprylyl Glycol

Polyglyceryl-10 Oleate

Isohexadecane

Butylene Glycol

Chlorphenesin

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Tocopheryl Acetate

Polysorbate 80

Sorbitan Palmitate

Sodium Hydroxide

Carbomer

Sodium Lactate

Polysorbate 20

Water, Glycerin, Dimethicone, Simmondsia Chinensis Seed Oil, Squalane, Glyceryl Stearate, Cetyl Alcohol, Niacinamide, Stearyl Alcohol, Palmitoyl Tripeptide-5, Pantolactone, Palmitoyl Tripeptide-1, Palmitoyl Tetrapeptide-7, Hydrolyzed Plukenetia Volubilis Seed Extract, Dunaliella Salina Extract, Sodium Hyaluronate, 3-O-Ethyl Ascorbic Acid, Panthenol, Caryodendron Orinocense Seed Oil, Honokiol, Magnolol, Palmitic Acid, Sorbitan Oleate, Aluminum Starch Octenylsuccinate, Hydroxyacetophenone, Stearic Acid, Acrylamide/Sodium Acryloyldimethyltaurate Copolymer, Polyglyceryl-6 Laurate, 1,2-Hexanediol, Boron Nitride, Caprylyl Glycol, Polyglyceryl-10 Oleate, Isohexadecane, Butylene Glycol, Chlorphenesin, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Tocopheryl Acetate, Polysorbate 80, Sorbitan Palmitate, Sodium Hydroxide, Sodium Benzoate, Carbomer, Sodium Lactate, Phenoxyethanol, Polysorbate 20, Citric Acid, Ethylhexylglycerin, Potassium Sorbate

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Citric Acid is an alpha hydroxy acid (AHA) naturally found in citrus fruits like oranges, lemons, and limes.

Like other AHAs, citric acid can exfoliate skin by breaking down the bonds that hold dead skin cells together. This helps reveal smoother and brighter skin underneath.

However, this exfoliating effect only happens at high concentrations (20%) which can be hard to find in cosmetic products.

Due to this, citric acid is usually included in small amounts as a pH adjuster. This helps keep products slightly more acidic and compatible with skin's natural pH.

In skincare formulas, citric acid can:

While it can provide some skin benefits, research shows lactic acid and glycolic acid are generally more effective and less irritating exfoliants.

Most citric acid used in skincare today is made by fermenting sugars (usually from molasses). This synthetic version is identical to the natural citrus form but easier to stabilize and use in formulations.

Rosacea skin has a lower threshold for acids generally, with 62.5% of rosacea subjects in one study reacting to lactic acid in a sting test. This is why we mark citric acid as a potential rosacea trigger.

However, this ingredient shows up as a pH adjuster or chelator at roughly 0.1-1% in many products. These low levels are unlikely to be an issue for rosacea skin and becomes a potential trigger at exfoliating concentrations (20%). Because everybody's skin is unique, we recommend a patch test if you are unsure.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Potassium Sorbate is a preservative used to prevent yeast and mold in products. It is commonly found in both cosmetic and food products.

This ingredient comes from potassium salt derived from sorbic acid. Sorbic acid is a natural antibiotic and effective against fungus.

Both potassium sorbate and sorbic acid can be found in baked goods, cheeses, dried meats, dried fruit, ice cream, pickles, wine, yogurt, and more.

You'll often find this ingredient used with other preservatives.

Sodium Benzoate is a preservative. It's used in both cosmetic and food products to inhibit the growth of mold and bacteria. It is typically produced synthetically.

Both the US FDA and EU Health Committee have approved the use of sodium benzoate. In the US, levels of 0.1% (of the total product) are allowed.

Sodium benzoate works as a preservative by inhibiting the growth of bacteria inside of cells. It prevents the cell from fermenting a type of sugar using an enzyme called phosphofructokinase.

It is the salt of benzoic acid. Foods containing sodium benzoate include soda, salad dressings, condiments, fruit juices, wines, and snack foods.

Studies for using ascorbic acid and sodium benzoate in cosmetics are lacking, especially in skincare routines with multiple steps.

We always recommend speaking with a professional, such as a dermatologist, if you have any concerns.

Sorbitan Oleate is a PEG-free emulsifier made by esterifying sorbitol with oleic acid.

You'll likely see it paired with Polysorbate 80 to create the right emulsification balance.

Typical use levels in formulas range from 2-10%.

The CIR Expert Panel has concluded this ingredient to be safe as a cosmetic ingredient.

Since this ingredient is an ester of oleic acid, it may not be fungal acne safe. Oleic acid is a fatty acid that falls into the C11-24 range that Malassezia can metabolize.

Squalane is the hydrogenated and shelf-stable form of squalene (a lipid that naturally occurs in human sebum).

It is an emollient and skin conditioning agent that is able to integrate seamlessly into the skin's lipid barrier without clogging pores.

This is due to how structurally similar it is to what your skin already produces.

Though it is mostly an emollient that helps soften and hydrate skin, it also has some humectant and occlusive action. Humectants help the skin retain moisture while occlusives seal it in, making squalane a triple-threat moisturizer.

Research shows it has antioxidant capabilities that help protect against stressors like UV exposure, specifically UVA induced oxidative stress. This study also found that it supports collagen biosynthesis in human dermal fibroblasts.

No clinical study has reported significant adverse effects and irritation reactions are very rare from this ingredient (even at 100% concentration).

Overall, it's a fantastic ingredient for hydration and is suitable for all skin types.

This depends on the source. Squalane can be derived from both plants and animals. Most squalane used in skincare comes from plants.

Please note: the source of squalane is only known if disclosed by the brand. We recommend reaching out to the brand if you have any questions about their squalane.

Read more about squalene with an "e".

Though squalane is often called an oil, it’s technically not one. It is a hydrocarbon, meaning it is only made of carbon and hydrogen. True oils are triglycerides and made of fatty acids and glycerol.

The term “oil-free” isn’t regulated so companies can define it however they want. Some exclude all oils, while others just avoid mineral oil or comedogenic oils.

Squalane has a comedogenic rating of 1 from the original 1972 study that tested raw ingredients under occlusion on rabbit ears. This system is not standardized or peer-reviewed, and using the raw ingredients is very different from how diluted cosmetic formulations are used on human skin.

A comedogenic rating of 1 means it is "unlikely to clog pores" according to the original rating system.

The overall formula of a product matters more than the individual ingredients on whether or not it will cause clogged pores.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Water
  2. 02Glycerin
  3. 03Dimethicone
  4. 04Simmondsia Chinensis Seed Oil
  5. 05Squalane
  6. 06Glyceryl Stearate
  7. 07Cetyl Alcohol
  8. 08Niacinamide
  9. 09Stearyl Alcohol
  10. 10Palmitoyl Tripeptide-5
  11. 11Pantolactone
  12. 12Palmitoyl Tripeptide-1
  13. 13Palmitoyl Tetrapeptide-7
  14. 14Hydrolyzed Plukenetia Volubilis Seed Extract
  15. 15Dunaliella Salina Extract
  16. 16Sodium Hyaluronate
  17. 173-O-Ethyl Ascorbic Acid
  18. 18Panthenol
  19. 19Caryodendron Orinocense Seed Oil
  20. 20Honokiol
Source · skinsort.com
02

Product index

Related product references

Product

Naturium Multi-Peptide Moisturizer

Naturium Multi-Peptide Moisturizer Ingredients in Naturium Multi-Peptide Moisturizer explained: benefits, concerns, and detailed analysis of 48 ingredients including Water, Glycerin, and Di…

Source: skinsort.comView reference →
03

Comparison edit

Read side by side