Skin science article
Neutrogena Hydro Boost Hydrating Serum Versus Bubble Water Slide Hydration Boosting Serum Hyaluronic Acid + Peptides
Neutrogena Hydro Boost Hydrating Serum Versus Bubble Water Slide Hydration Boosting Serum Hyaluronic Acid + Peptides This hydrating serum is formulated around Sodium Hyaluronate to hydrate skin and strengthen the skin barrier. This hydrating serum is formulate
Neutrogena Hydro Boost Hydrating Serum Versus Bubble Water Slide Hydration Boosting Serum Hyaluronic Acid + Peptides
This hydrating serum is formulated around Sodium Hyaluronate to hydrate skin and strengthen the skin barrier.
This hydrating serum is formulated around Niacinamide and Sodium Hyaluronate to hydrate skin and strengthen the skin barrier.
What's inside
Key Ingredients
Benefits
Concerns
Ingredients Side-by-side
Water
Glycerin
Dimethicone
Butylene Glycol
Neopentyl Glycol Diheptanoate
Aluminum Starch Octenylsuccinate
Isododecane
Dimethiconol
Ammonium Acryloyldimethyltaurate/Vp Copolymer
Ethylhexylglycerin
Benzyl Alcohol
Sodium Lactate
Cetearyl Olivate
Bisabolol
Chlorphenesin
Sorbitan Olivate
Sodium PCA
Parfum
Sodium Hyaluronate
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Sorbitol
Chondrus Crispus Extract
Sodium Hydroxide
Proline
Portulaca Oleracea Extract
Propylene Glycol
Citric Acid
Magnesium Aspartate
Zinc Gluconate
Copper Gluconate
Water, Glycerin, Dimethicone, Butylene Glycol, Neopentyl Glycol Diheptanoate, Aluminum Starch Octenylsuccinate, Isododecane, Dimethiconol, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Ethylhexylglycerin, Benzyl Alcohol, Sodium Lactate, Cetearyl Olivate, Bisabolol, Chlorphenesin, Sorbitan Olivate, Sodium PCA, Parfum, Sodium Hyaluronate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Sorbitol, Chondrus Crispus Extract, Sodium Hydroxide, Proline, Portulaca Oleracea Extract, Propylene Glycol, Citric Acid, Magnesium Aspartate, Zinc Gluconate, Copper Gluconate
Propanediol
Squalane
Niacinamide
Saccharide Isomerate
Capryloyl Glycerin/Sebacic Acid Copolymer
Diheptyl Succinate
Tremella Fuciformis Extract
Sodium Hyaluronate Crosspolymer
Palmitoyl Tripeptide-1
Palmitoyl Tetrapeptide-7
Aloe Barbadensis Leaf Juice
Glyceryl Acrylate/Acrylic Acid Copolymer
Opuntia Ficus-Indica Seed Oil
Tocopheryl Acetate
Lauryl Glucoside
Xanthan Gum
Phytic Acid
Cetyl Alcohol
Sucrose
Anastatica Hierochuntica Extract
Euphorbia Cerifera Cera
Butyrospermum Parkii Butter
Beta-Sitosterol
Glyceryl Behenate
Polyglyceryl-4 Isostearate
Oleic Acid
Ceramide NP
Ceramide Ng
Lecithin
Tocopherol
Potassium Hydroxide
Gluconolactone
Phenoxyethanol
Sodium Benzoate
Lactic Acid
Sodium Citrate
Water, Propanediol, Glycerin, Squalane, Niacinamide, Saccharide Isomerate, Capryloyl Glycerin/Sebacic Acid Copolymer, Diheptyl Succinate, Tremella Fuciformis Extract, Sodium Hyaluronate, Sodium Hyaluronate Crosspolymer, Palmitoyl Tripeptide-1, Palmitoyl Tetrapeptide-7, Aloe Barbadensis Leaf Juice, Glyceryl Acrylate/Acrylic Acid Copolymer, Opuntia Ficus-Indica Seed Oil, Tocopheryl Acetate, Lauryl Glucoside, Xanthan Gum, Sodium Lactate, Phytic Acid, Cetearyl Olivate, Sorbitan Olivate, Cetyl Alcohol, Sucrose, Anastatica Hierochuntica Extract, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Euphorbia Cerifera Cera, Butyrospermum Parkii Butter, Beta-Sitosterol, Glyceryl Behenate, Polyglyceryl-4 Isostearate, Oleic Acid, Ceramide NP, Ceramide Ng, Lecithin, Tocopherol, Potassium Hydroxide, Gluconolactone, Phenoxyethanol, Sodium Benzoate, Lactic Acid, Citric Acid, Sodium Citrate, Ethylhexylglycerin
Reviews
Be the first to review
Alternatives
Ingredients Explained
These ingredients are found in both products.
Ingredients higher up in an ingredient list are typically present in a larger amount.
Acrylates/C10-30 Alkyl Acrylate Crosspolymer is a synthetic polymer. It is used to thicken, emulsify, and improve the texture of products.
As an emulsifier, it helps stabilize oil-in-water emulsions to give products an elegant feel when applied.
It can also form a thin protective film on skin. One study found that a formula using this polymer helped slow down how quickly other ingredients (like DEET) were absorbed through skin.
A 2024 study of over 1,300 patients confirmed that sensitization to this ingredient is rare. It is also non-mutagenic and has a clean track record.
Cetearyl Olivate is a plant-derived emulsifier and texture enhancer. It helps keep the oil and water phases from separating so your formulas stay stable.
You'll likely see it combined with Sorbitan Olivate (together sold as the trade name Olivem 1000). This combination generates a liquid crystal structure that closely resemble the lipid organization of the stratum corneum.
These "skin-like" liquid crystals improve skin barrier integrity and promote the delivery of actives into the skin.
This ingredient is well-tolerated and has no significant sensitization data.
Because it is derived from the fatty acids in olive oil, this ingredient may not be fungal acne safe.
Citric Acid is an alpha hydroxy acid (AHA) naturally found in citrus fruits like oranges, lemons, and limes.
Like other AHAs, citric acid can exfoliate skin by breaking down the bonds that hold dead skin cells together. This helps reveal smoother and brighter skin underneath.
However, this exfoliating effect only happens at high concentrations (20%) which can be hard to find in cosmetic products.
Due to this, citric acid is usually included in small amounts as a pH adjuster. This helps keep products slightly more acidic and compatible with skin's natural pH.
In skincare formulas, citric acid can:
While it can provide some skin benefits, research shows lactic acid and glycolic acid are generally more effective and less irritating exfoliants.
Most citric acid used in skincare today is made by fermenting sugars (usually from molasses). This synthetic version is identical to the natural citrus form but easier to stabilize and use in formulations.
Rosacea skin has a lower threshold for acids generally, with 62.5% of rosacea subjects in one study reacting to lactic acid in a sting test. This is why we mark citric acid as a potential rosacea trigger.
However, this ingredient shows up as a pH adjuster or chelator at roughly 0.1-1% in many products. These low levels are unlikely to be an issue for rosacea skin and becomes a potential trigger at exfoliating concentrations (20%). Because everybody's skin is unique, we recommend a patch test if you are unsure.
Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.
Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
Topically, glycerin does several things at once:
Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Just know very high concentrations (>40%) can feel tacky in low humidity.
Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Interestingly, the size of the molecule affects its behavior:
Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.
Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.
You'll typically see concentrations between 0.1-2% for this ingredient.
Sodium Lactate is the sodium salt of lactic acid, an AHA. It is a humectant and sometimes used to adjust the pH of a product.
This ingredient is part of our skin's NMF, or natural moisturizing factor. Our NMF is essential for the hydration of our top skin layers and plasticity of skin. NMF also influences our skin's natural acid mantle and pH, which protects our skin from harmful bacteria.
High percentages of Sodium Lactate can have an exfoliating effect.
Fun fact: Sodium Lactate is produced from fermented sugar.
Sorbitan Olivate is created from the fatty acids in olive oil and sorbitol.
This ingredient is an oil in water emulsifier. It helps stabilize a product by preventing oils and waters from separating. Sorbitan Olivate also helps hydrate the skin.
This ingredient is also known as part of Olivem 1000, with Cetearyl Olivate being the other part.
According to a manufacturer, this ingredient helps preserve the natural microbiome of skin. Having a healthy microbiome helps keep our skin healthy and protects against harmful bacteria.
Please note, having a healthy microbiome is different from fungal acne; a healthy microbiome includes small amounts of yeast that normally live on your skin without causing problems.
Fungal acne happens when one type of yeast (Malassezia) grows out of control. This is usually because it's feeding on certain oils or fatty acids. Due to the olive oil base, this ingredient may not be fungal acne safe.
Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.
So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.
You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!