Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Paula's Choice 2% BHA Lotion Exfoliant Versus The Ordinary Glycolic Acid 7% Exfoliating Toner

Paula's Choice 2% BHA Lotion Exfoliant Versus The Ordinary Glycolic Acid 7% Exfoliating Toner This smoothing exfoliator is formulated around Salicylic Acid and Camellia Sinensis Leaf Extract to refine skin texture and refine the look of pores. This smoothing t

By Peptide Skincare & Beauty Editorial TeamPublished

Paula's Choice 2% BHA Lotion Exfoliant Versus The Ordinary Glycolic Acid 7% Exfoliating Toner

This smoothing exfoliator is formulated around Salicylic Acid and Camellia Sinensis Leaf Extract to refine skin texture and refine the look of pores.

This smoothing toner is formulated around Glycolic Acid to refine skin texture and brighten dull-looking skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Butylene Glycol

Polysorbate 20

Cetyl Alcohol

Salicylic Acid

Ammonium Acryloyldimethyltaurate/Vp Copolymer

Cyclopentasiloxane

Sorbitan Stearate

Camellia Sinensis Leaf Extract

Lauric Acid

Allantoin

Glycerin

Glycyrrhiza Glabra Root Extract

Avena Sativa Kernel Extract

Epilobium Angustifolium Extract

Dimethicone

Xanthan Gum

Magnesium Aluminum Silicate

PEG-40 Hydrogenated Castor Oil

Sodium Hydroxide

Hexylene Glycol

Disodium EDTA

Ethylhexylglycerin

Phenoxyethanol

Caprylyl Glycol

Water, Butylene Glycol, Polysorbate 20, Cetyl Alcohol, Salicylic Acid, Ammonium Acryloyldimethyltaurate/Vp Copolymer, Cyclopentasiloxane, Sorbitan Stearate, Camellia Sinensis Leaf Extract, Lauric Acid, Allantoin, Glycerin, Glycyrrhiza Glabra Root Extract, Avena Sativa Kernel Extract, Epilobium Angustifolium Extract, Dimethicone, Xanthan Gum, Magnesium Aluminum Silicate, PEG-40 Hydrogenated Castor Oil, Sodium Hydroxide, Hexylene Glycol, Disodium EDTA, Ethylhexylglycerin, Phenoxyethanol, Caprylyl Glycol

Glycolic Acid

Rosa Damascena Flower Water

Centaurea Cyanus Flower Water

Aloe Barbadensis Leaf Water

Propanediol

Triethanolamine

Aminomethyl Propanol

Panax Ginseng Root Extract

Tasmannia Lanceolata Fruit/Leaf Extract

Aspartic Acid

Alanine

Glycine

Serine

Valine

Isoleucine

Proline

Threonine

Histidine

Phenylalanine

Glutamic Acid

Arginine

PCA

Sodium PCA

Sodium Lactate

Fructose

Glucose

Sucrose

Urea

Hexyl Nicotinate

Dextrin

Citric Acid

Gellan Gum

Trisodium Ethylenediamine Disuccinate

Sodium Chloride

Potassium Sorbate

Sodium Benzoate

1,2-Hexanediol

Water, Glycolic Acid, Rosa Damascena Flower Water, Centaurea Cyanus Flower Water, Aloe Barbadensis Leaf Water, Propanediol, Glycerin, Triethanolamine, Aminomethyl Propanol, Panax Ginseng Root Extract, Tasmannia Lanceolata Fruit/Leaf Extract, Aspartic Acid, Alanine, Glycine, Serine, Valine, Isoleucine, Proline, Threonine, Histidine, Phenylalanine, Glutamic Acid, Arginine, PCA, Sodium PCA, Sodium Lactate, Fructose, Glucose, Sucrose, Urea, Hexyl Nicotinate, Dextrin, Citric Acid, Polysorbate 20, Gellan Gum, Trisodium Ethylenediamine Disuccinate, Sodium Chloride, Hexylene Glycol, Potassium Sorbate, Sodium Benzoate, 1,2-Hexanediol, Caprylyl Glycol

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Hexylene Glycol is a multitasker ingredient that works as a solvent, humectant, emulsifier, viscosity reducer, and preservative booster.

It is able to dissolve both water and oil-soluble ingredients to stabilize tricky actives and make products spread more easily.

As a humectant, it pulls water into the skin. But it's a pretty minor moisturizing ingredient compared to other humectants, like glycerin.

Interestingly, it can act as a mild penetration enhancer. One in vitro study on human skin found a 12% concentration upped the absorption of mometasone furoate (a medicinal ingredient used to treat inflammatory skin conditions) up to 7%.

This ingredient is typically used at levels of 0.1-10% depending on the role it's playing.

A patch test study on eczema patients didn't find a significant increase in irritation versus the control group, but the potential for irritation rises at higher concentrations.

Polysorbate 20 is a gentle, water-soluble emulsifier and mild surfactant. It stops oil and water from separating to keep your formulas blended and stable.

It also acts as a mild penetration enhancer by helping active ingredients absorb slightly better.

The common safety discussion around this ingredient involves a manufacturing byproduct called 1,4-dioxane.

Trace amounts can form during production but the EU's Scientific Committee on Consumer Safety has concluded that levels at/below 10 ppm in finished products are safe (commercial products consistently fall within acceptable margins).

True allergic reactions are uncommon and the CIR Expert Panel has confirmed this ingredient to be safe as used in cosmetics.

Because it is derived from lauric acid, it may not be fungal acne safe.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Citric Acid is an alpha hydroxy acid (AHA) naturally found in citrus fruits like oranges, lemons, and limes.
  4. 04Like other AHAs, citric acid can exfoliate skin by breaking down the bonds that hold dead skin cells together. This helps reveal smoother and brighter skin underneath.
  5. 05However, this exfoliating effect only happens at high concentrations (20%) which can be hard to find in cosmetic products.
  6. 06Due to this, citric acid is usually included in small amounts as a pH adjuster. This helps keep products slightly more acidic and compatible with skin's natural pH.
  7. 07In skincare formulas, citric acid can:
  8. 08While it can provide some skin benefits, research shows lactic acid and glycolic acid are generally more effective and less irritating exfoliants.
  9. 09Most citric acid used in skincare today is made by fermenting sugars (usually from molasses). This synthetic version is identical to the natural citrus form but easier to stabilize and use in formulations.
  10. 10Rosacea skin has a lower threshold for acids generally, with 62.5% of rosacea subjects in one study reacting to lactic acid in a sting test. This is why we mark citric acid as a potential rosacea trigger.
  11. 11However, this ingredient shows up as a pH adjuster or chelator at roughly 0.1-1% in many products. These low levels are unlikely to be an issue for rosacea skin and becomes a potential trigger at exfoliating concentrations (20%). Because everybody's…
  12. 12Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
  13. 13This ingredient mainly works behind the scenes and helps with:
  14. 14On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
  15. 15One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too st…
  16. 16Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
  17. 17You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
  18. 18Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  19. 19Topically, glycerin does several things at once:
  20. 20Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
Source · skinsort.com ⟶
02

Product index

Related product references

03

Comparison edit

Read side by side

Continue reading

Related articles