Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Paula's Choice Clear Oil-Free Moisturizer Versus La Roche-Posay Toleriane Double Repair Matte Face Moisturizer for Oily Skin

Paula's Choice Clear Oil-Free Moisturizer Versus La Roche-Posay Toleriane Double Repair Matte Face Moisturizer for Oily Skin This barrier-repair moisturizer is formulated around Niacinamide and Ceramide NP to strengthen the skin barrier and calm redness. This

Paula's Choice Clear Oil-Free Moisturizer Versus La Roche-Posay Toleriane Double Repair Matte Face Moisturizer for Oily Skin

This barrier-repair moisturizer is formulated around Niacinamide and Ceramide NP to strengthen the skin barrier and calm redness.

This oil-control moisturizer is formulated around Silica and Niacinamide to balance excess oil and strengthen the skin barrier.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Ethyl Macadamiate

Glycerin

Cetearyl Alcohol

Propanediol

Triethylhexanoin

Sodium Acrylates Copolymer

Glyceryl Stearate

PEG-100 Stearate

Glycyrrhiza Glabra Root

Hydrolyzed Pumpkin Seedcake

Vaccinium Angustifolium Fruit Extract

Euterpe Oleracea Fruit Extract

Prunus Serotina Fruit Extract

Niacinamide

Tripeptide-29

Ceramide NP

Ceramide AP

Ceramide EOP

Sodium Hyaluronate

Phytosphingosine

Cholesterol

Panthenol

Sodium PCA

Adenosine

Lecithin

Arginine

Sodium Lauroyl Lactylate

Sodium Gluconate

Citric Acid

Isohexadecane

Xanthan Gum

Carbomer

Phenoxyethanol

Ethylhexylglycerin

Water, Ethyl Macadamiate, Glycerin, Cetearyl Alcohol, Propanediol, Triethylhexanoin, Sodium Acrylates Copolymer, Glyceryl Stearate, PEG-100 Stearate, Glycyrrhiza Glabra Root, Hydrolyzed Pumpkin Seedcake, Vaccinium Angustifolium Fruit Extract, Euterpe Oleracea Fruit Extract, Prunus Serotina Fruit Extract, Niacinamide, Tripeptide-29, Ceramide NP, Ceramide AP, Ceramide EOP, Sodium Hyaluronate, Phytosphingosine, Cholesterol, Panthenol, Sodium PCA, Adenosine, Lecithin, Arginine, Sodium Lauroyl Lactylate, Sodium Gluconate, Citric Acid, Isohexadecane, Xanthan Gum, Carbomer, Phenoxyethanol, Ethylhexylglycerin

Silica

Betaine

Cetearyl Isononanoate

Zea Mays Starch

Glyceryl Stearate Citrate

Sodium Hydroxide

Perlite

Hydroxyacetophenone

Caprylyl Glycol

Water, Glycerin, Silica, Betaine, Niacinamide, Cetearyl Isononanoate, Zea Mays Starch, Ceramide NP, Carbomer, Glyceryl Stearate Citrate, Sodium Hyaluronate, Sodium Hydroxide, Perlite, Hydroxyacetophenone, Caprylyl Glycol, Xanthan Gum

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.

Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.

It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.

Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.

A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.

Ceramide NP (formerly known as Ceramide 3) is one of the skin's naturally occurring lipids.

Since ceramides are the major lipid components of the skin, they are crucial for maintaining skin barrier and hydration. Ceramide NP most closely mirrors the dominant kind in human skin amongst ceramide subtypes.

This ceramide works by slotting into gaps within the stratum corneum's lipid matrix to limit trans-epidermal water loss (TEWL) and shield the skin against external irritants.

A study with 312 patients found that using a ceramide-containing routine for 4 weeks reduced the severity of atopic dermatitis by over 61%.

Another clinical study in subjects aged 60 and older found that a ceramide body wash and moisturizer improved skin dryness and itchy skin in 15 days.

Overall, ceramides are considered non-irritating and safety tests have found little to no observable adverse effects from using this ingredient.

Ceramide NP is usually sourced from plants (like soybean or rice bran), or produced synthetically.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Niacinamide is a multitasking form of vitamin B3 that strengthens the skin barrier, reduces pores and dark spots, regulates oil, and improves signs of aging.

And the best part? It's gentle and well-tolerated by most skin types, including sensitive and reactive skin.

You might have heard of "niacin flush", or the reddening of skin that causes itchiness. Niacinamide has not been found to cause this.

In very rare cases, some individuals may not be able to tolerate niacinamide at all or experience an allergic reaction to it.

If you are experiencing flaking, irritation, and dryness with this ingredient, be sure to double check all your products as this ingredient can be found in all categories of skincare.

When incorporating niacinamide into your routine, look out for concentration amounts. Typically, 5% niacinamide provides benefits such as fading dark spots. However, if you have sensitive skin, it is better to begin with a smaller concentration.

When you apply niacinamide to your skin, your body converts it into nicotinamide adenine dinucleotide (NAD). NAD is an essential coenzyme that is already found in your cells as "fuel" and powers countless biological processes.

In your skin, NAD helps repair cell damage, produce new healthy cells, support collagen production, strengthen the skin barrier, and fight environmental stressors (like UV and pollution).

Our natural NAD levels start to decline with age, leading to slower skin repair, visible aging, and a weaker skin barrier. By providing your skin niacinamide, you're recharging your skin's NAD levels. This leads to stronger, healthier, and younger looking skin.

Another name for vitamin B3 is nicotinamide. This vitamin is water-soluble and our bodies don't store it. We obtain Vitamin B3 from either food or skincare. Meat, fish, wheat, yeast, and leafy greens contain vitamin B3.

The type of niacinamide used in skincare is synthetically created.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Water
  2. 02Sodium Lauroamphoacetate
  3. 03Sodium Cocoyl Isethionate
  4. 04Stearic Acid
  5. 05Glycerin
  6. 06Glycol Distearate
  7. 07Helianthus Annuus Seed Oil
  8. 08Acrylates Copolymer
  9. 09Cetearyl Alcohol
  10. 10Sodium Hyaluronate
  11. 11Ceramide NP
  12. 12Ceramide AP
  13. 13Ceramide EOP
  14. 14Phytosphingosine
  15. 15Phospholipids
  16. 16Sphingolipids
  17. 17Lecithin
  18. 18Arginine
  19. 19Cholesterol
  20. 20Aloe Barbadensis Leaf Extract
Source · skinsort.com
02

Product index

Related product references

Product

Paula's Choice 5% Niacinamide Body Serum

Paula's Choice 5% Niacinamide Body Serum Paula's Choice 5% Niacinamide Body Serum ingredients explained: Water⁠, Panthenol⁠, Niacinamide⁠, Caprylic/Capric Triglyceride⁠, Myristyl Myristate⁠…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side