Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Paula's Choice Clinical Niacinamide 20% Treatment Versus La Roche-Posay Mela B3 Dark Spot Serum With Melasyl+Niacinamide

Paula's Choice Clinical Niacinamide 20% Treatment Versus La Roche-Posay Mela B3 Dark Spot Serum With Melasyl+Niacinamide This pore-care treatment is formulated around Niacinamide and Acetyl Glucosamine to refine the look of pores and refine skin texture. This

Paula's Choice Clinical Niacinamide 20% Treatment Versus La Roche-Posay Mela B3 Dark Spot Serum With Melasyl+Niacinamide

This pore-care treatment is formulated around Niacinamide and Acetyl Glucosamine to refine the look of pores and refine skin texture.

This brightening serum is formulated around Niacinamide and 2-Mercaptonicotinoyl Glycine to fade the look of dark spots and refine skin texture.

What's inside

Key Ingredients

Benefits

Concerns

No concerns

Ingredients Side-by-side

Water

Niacinamide 20%

Pentylene Glycol

Butylene Glycol

Glycerin

Acetyl Glucosamine

Ascorbyl Glucoside

Glycyrrhiza Glabra Root Extract

Spiraea Ulmaria Extract

Portulaca Oleracea Extract

Camellia Japonica Flower Extract

Epigallocatechin Gallate

Boerhavia Diffusa Root Extract

Camellia Sinensis Leaf Extract

Allantoin

Lecithin

Pullulan

Panthenol

Silica

Xanthan Gum

Sclerotium Gum

Propanediol

Sodium Phytate

Phenoxyethanol

Ethylhexylglycerin

Water, Niacinamide 20%, Pentylene Glycol, Butylene Glycol, Glycerin, Acetyl Glucosamine, Ascorbyl Glucoside, Glycyrrhiza Glabra Root Extract, Spiraea Ulmaria Extract, Portulaca Oleracea Extract, Camellia Japonica Flower Extract, Epigallocatechin Gallate, Boerhavia Diffusa Root Extract, Camellia Sinensis Leaf Extract, Allantoin, Lecithin, Pullulan, Panthenol, Silica, Xanthan Gum, Sclerotium Gum, Propanediol, Sodium Phytate, Phenoxyethanol, Ethylhexylglycerin

Dimethicone

Niacinamide

Propylene Glycol

Polysilicone-11

Bis-PEG/PPG-16/16 PEG/PPG-16/16 Dimethicone

Cystoseira Tamariscifolia Extract

2-Mercaptonicotinoyl Glycine

PEG-20 Methyl Glucose Sesquistearate

Sodium Hyaluronate

Sodium Hydroxide

Sodium Thiosulfate

Carnosine

Poloxamer 338

Ammonium Polyacryloyldimethyl Taurate

Dipotassium Glycyrrhizate

Caprylic/Capric Triglyceride

Capryloyl Salicylic Acid

Caprylyl Glycol

Citric Acid

Trisodium Ethylenediamine Disuccinate

Octyldodecanol

Retinyl Palmitate

Tocopherol

Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate

CI 17200

Parfum

Water, Dimethicone, Niacinamide, Glycerin, Propylene Glycol, Polysilicone-11, Silica, Bis-PEG/PPG-16/16 PEG/PPG-16/16 Dimethicone, Cystoseira Tamariscifolia Extract, 2-Mercaptonicotinoyl Glycine, PEG-20 Methyl Glucose Sesquistearate, Sodium Hyaluronate, Sodium Hydroxide, Sodium Thiosulfate, Carnosine, Poloxamer 338, Ammonium Polyacryloyldimethyl Taurate, Dipotassium Glycyrrhizate, Caprylic/Capric Triglyceride, Capryloyl Salicylic Acid, Caprylyl Glycol, Citric Acid, Trisodium Ethylenediamine Disuccinate, Xanthan Gum, Pentylene Glycol, Octyldodecanol, Retinyl Palmitate, Tocopherol, Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate, Phenoxyethanol, CI 17200, Parfum

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Niacinamide is a multitasking form of vitamin B3 that strengthens the skin barrier, reduces pores and dark spots, regulates oil, and improves signs of aging.

And the best part? It's gentle and well-tolerated by most skin types, including sensitive and reactive skin.

You might have heard of "niacin flush", or the reddening of skin that causes itchiness. Niacinamide has not been found to cause this.

In very rare cases, some individuals may not be able to tolerate niacinamide at all or experience an allergic reaction to it.

If you are experiencing flaking, irritation, and dryness with this ingredient, be sure to double check all your products as this ingredient can be found in all categories of skincare.

When incorporating niacinamide into your routine, look out for concentration amounts. Typically, 5% niacinamide provides benefits such as fading dark spots. However, if you have sensitive skin, it is better to begin with a smaller concentration.

When you apply niacinamide to your skin, your body converts it into nicotinamide adenine dinucleotide (NAD). NAD is an essential coenzyme that is already found in your cells as "fuel" and powers countless biological processes.

In your skin, NAD helps repair cell damage, produce new healthy cells, support collagen production, strengthen the skin barrier, and fight environmental stressors (like UV and pollution).

Our natural NAD levels start to decline with age, leading to slower skin repair, visible aging, and a weaker skin barrier. By providing your skin niacinamide, you're recharging your skin's NAD levels. This leads to stronger, healthier, and younger looking skin.

Another name for vitamin B3 is nicotinamide. This vitamin is water-soluble and our bodies don't store it. We obtain Vitamin B3 from either food or skincare. Meat, fish, wheat, yeast, and leafy greens contain vitamin B3.

The type of niacinamide used in skincare is synthetically created.

Pentylene Glycol (1,2-pentanediol) is a multitasking little diol with three main roles in a formula:

Research on alkanediols (the family pentylene glycol belongs to) show they work by disrupting microbial cell membranes. This disruption helps the primary preservative system in a product work more effectively at lower doses.

On the safety side, the Cosmetic Ingredient Review Expert Panel has concluded this ingredient to be safe as used in current cosmetic practices + concentrations.

Typical use levels in a formula run about 1-5%.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Silica, also known as silicon dioxide, is a naturally occurring mineral. It is used as a fine, spherical, and porous powder in cosmetics.

Though it has exfoliant properties, the function of silica varies depending on the product.

The unique structure of silica enhances the spreadability and adds smoothness, making it a great texture enhancer.

It is also used as an active carrier, emulsifier, and mattifier due to its ability to absorb excess oil.

In some products, tiny microneedles called spicules are made from silica or hydrolyzed sponge. When you rub them in, they lightly polish away dead skin layers and enhance the penetration of active ingredients.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Paula's Choice 5% Vitamin C Sheer Moisturizer SPF 50Ingredients explained

  1. 01Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product.
  2. 02It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water.
  3. 03Expand to read more
  4. 04Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying.
  5. 05One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time.
  6. 06A clear, oil-soluble, "cosmetically-elegant" liquid that is the most commonly used chemical sunscreen. It absorbs UVB radiation (at wavelengths: 280-320 nm) with a peak protection at 310nm.
  7. 07It only protects against UVB and not UVA rays (the 320-400 nm range) – so always choose products that contain other sunscreens too. It is not very stable either, when exposed to sunlight, it kind of breaks down and loses its effectiveness (not insta…
  8. 08Regarding safety, there are also some concerns around Octinoxate. In vitro (made in the lab not on real people) and animal studies have shown that it may produce hormonal (estrogen-like) effects. Do not panic, the studies were not conducted under re…
  9. 09Overall, Ethylhexyl Methoxycinnamate is an old-school chemical sunscreen agent. There are plenty of better options for sun protection today, but it is considered "safe as used" (and sunscreens are pretty well regulated) and it is available worldwide…
  10. 10A colorless to light yellowish oily liquid that works as a UVB (280-320nm) sunscreen filter with a peak absorbance at 306 nm. It's not a strong filter in itself, it's always used in combination with other sunscreen agents to further enhance the SPF …
  11. 11It has a good safety profile and is allowed to be used at a max concentration of 5% both in the US and in Europe (10% is allowed in Japan).
  12. 12A natural moisturizer that’s also in our skin
  13. 13A super common, safe, effective and cheap molecule used for more than 50 years
  14. 14Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  15. 15Effective from as low as 3% with even more benefits for dry skin at higher concentrations up to 20-40%
  16. 16High-glycerin moisturizers are awesome for treating severely dry skin
  17. 17A white powdery thing that's the major component of glass and sand. In cosmetics, it’s often in products that are supposed to keep your skin matte as it has great oil-absorbing abilities. It’s also used as a helper ingredient to thicken up products …
  18. 18The famous Avobenzone. It is a special snowflake as it is the only globally available chemical sunscreen agent that provides proper UVA protection (in the US, new generation sunscreen agents are not approved because of impossible FDA regulations). I…
  19. 19It gives very good protection across the whole UVA range (310-400 nm that is both UVA1 and UVA2) with a peak protection at 360 nm. The problem with it, though, is that it is not photostable and degrades in the sunlight. Wikipedia says that avobenzon…
  20. 20The cosmetic's industry is trying to solve the problem by combining avobenzone with other UV filters that enhance its stability (like octocrylene, Tinosorb S or Ensulizole) or by encapsulating it and while both solutions help, neither is perfect. In…
Source · incidecoder.com
02

Product index

Related product references

03

Comparison edit

Read side by side