Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

PCA Skin Silkcoat Balm Versus Neutrogena Deep Moisture Night Cream

PCA Skin Silkcoat Balm Versus Neutrogena Deep Moisture Night Cream This barrier-repair night moisturizer is formulated around Butyrospermum Parkii Butter and Hydrolyzed Silk to strengthen the skin barrier and hydrate skin. This barrier-repair night moisturizer

PCA Skin Silkcoat Balm Versus Neutrogena Deep Moisture Night Cream

This barrier-repair night moisturizer is formulated around Butyrospermum Parkii Butter and Hydrolyzed Silk to strengthen the skin barrier and hydrate skin.

This barrier-repair night moisturizer is formulated around Butyrospermum Parkii Butter and Petrolatum to strengthen the skin barrier and hydrate skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Glycerin

Butyrospermum Parkii Butter

Caprylic/Capric Triglyceride

Cetyl Alcohol

Glyceryl Stearate

Cyclopentasiloxane

Dimethicone

Theobroma Cacao Seed Butter

C12-15 Alkyl Benzoate

Stearic Acid

Potassium Cetyl Phosphate

Cetearyl Alcohol

Phenoxyethanol

Polysorbate 60

Allantoin

Simmondsia Chinensis Seed Oil

Squalane

Tocopheryl Acetate

Hydrolyzed Silk

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Ethylhexylglycerin

Hydrastis Canadensis Extract

Lavandula Angustifolia Flower Extract

Rosmarinus Officinalis Leaf Extract

Thymus Vulgaris Flower/Leaf Extract

Sodium Hydroxide

Water, Glycerin, Butyrospermum Parkii Butter, Caprylic/Capric Triglyceride, Cetyl Alcohol, Glyceryl Stearate, Cyclopentasiloxane, Dimethicone, Theobroma Cacao Seed Butter, C12-15 Alkyl Benzoate, Stearic Acid, Potassium Cetyl Phosphate, Cetearyl Alcohol, Phenoxyethanol, Polysorbate 60, Allantoin, Simmondsia Chinensis Seed Oil, Squalane, Tocopheryl Acetate, Hydrolyzed Silk, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Ethylhexylglycerin, Hydrastis Canadensis Extract, Lavandula Angustifolia Flower Extract, Rosmarinus Officinalis Leaf Extract, Thymus Vulgaris Flower/Leaf Extract, Sodium Hydroxide

Dicaprylyl Carbonate

Silica

BHT

Petrolatum

Cholecalciferol

Calcium Chloride

Sodium Polyacrylate

Caprylyl Glycol

Parfum

Water, Glycerin, Cetearyl Alcohol, Dicaprylyl Carbonate, Stearic Acid, Butyrospermum Parkii Butter, Silica, BHT, Petrolatum, Ethylhexylglycerin, Cholecalciferol, Calcium Chloride, Caprylic/Capric Triglyceride, Sodium Polyacrylate, Caprylyl Glycol, Phenoxyethanol, Parfum

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

This ingredient is also known as shea butter. It is a plant-derived extract from the nuts of the Africa shea tree and one of the most well-studied emollients.

Because it has a high concentration of fatty acids (primarily oleic, stearic, and linoleic) it is able to form a protective barrier on the skin's surface. This helps seal in moisture and prevents transepidermal water loss (TEWL).

In vitro research found an increase in skin hydration by 58% and a decrease in TEWL by 37.8% after 24 hours of applying this ingredient (pretty impressive for a single ingredient!).

Besides hydration, shea butter also contains triterpenes that have anti-inflammatory potential. In particule, lupeol cinnamate has shown the highest anti-inflammatory activity in vivo.

Shea butter also contains vitamins A and E which may contribute to antioxidant activity.

While Shea Butter has an SPF rating of about 3-4, it is not a sunscreen replacement.

This ingredient may not be fungal acne safe because its fatty acids fall within the C11-C24 range that the Malassezia yeast can metabolize.

Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.

Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.

In practice, that translates to a long shelf life and a consistently elegant skin feel.

While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.

Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.

This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.

This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures at concentrations as low as 0.2%.

Cetearyl alcohol is a waxy mixture of two fatty alcohols: cetyl alcohol and stearyl alcohol. It is an emollient and emulsifier.

Despite having "alcohol" in its name, it has nothing to do with drying solvent alcohols; the FDA also allows "alcohol-free" products to contain fatty alcohols like this ingredient.

It plays several roles in a formula:

Typical use levels for this ingredient sit around 1-10% and the Cosmetic Ingredient Review Expert Panel has affirmed safety at concentrations up to 25% in leave-on products.

Multiple assessments have found it to be non-irritating and non-sensitizing to most people.

However, there have been some cases of allergic contact dermatitis in patients with chronically compromised skin barriers.

Cetearyl alcohol has a comedogenic rating of 2 and irritancy rating of 1. Both of these numbers come from the 1989 study that used rabbit ears; a "2" means mildly comedogenic and a "1" means low irritancy.

Here's the catch: rabbit skin is more sensitive than human skin and throws a lot of false positives. A 1996 reappraisal found that ingredients rated 1-2 in the rabbit ear tests are generally safe for humans.

Remember comedogenic ratings are unable to assess the entire formula of a product or how it will react on your skin. Just be sure to patch test if you are unsure about certain ingredients.

This ingredient is not fungal acne safe. Cetearyl alcohol is a fatty alcohol with chain lengths that fall within the range that Malassezia can metabolize.

A 2019 study has also observed Malassezia growth in the presence of this ingredient, confirming it to be not-fungal acne safe.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Stearic Acid is a fatty acid that is already found in your skin. It's one of the free fatty acids that works alongside ceramides and cholesterols to maintain your barrier.

In cosmetics, it is a multitasker:

Safety-wise, the CIR Expert Panel has concluded it to be safe in cosmetics when formulated to be non-irritating and non-sensitizing.

Free stearic acid is a C18 fatty acid that the Malassezia yeast can substrate, so this ingredient may not be fungal acne safe.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.
  4. 04Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.
  5. 05It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.
  6. 06Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.
  7. 07A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.
  8. 08Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
  9. 09The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure …
  10. 10Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
  11. 11Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
  12. 12It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
  13. 13On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.
  14. 14Another perk of this ingredient is that it stays functional across a wide pH range (3-10).
  15. 15You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.
  16. 16Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.
  17. 17Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.
  18. 18Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.
  19. 19Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.
  20. 20In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.
Source · skinsort.com
02

Product index

Related product references

Product

PCA Skin Acne Cream

PCA Skin Acne Cream PCA Skin Acne Cream ingredients explained: Benzoyl Peroxide (5%), Water, Gluconolactone, Glycerin, Caprylic/Capric Triglyceride, Cetyl Alcohol, Vitis Vinifera (Grape) Se…

Source: incidecoder.comView reference →

Product

PCA Skin Silkcoat Balm

PCA Skin Silkcoat Balm PCA Skin Silkcoat Balm ingredients explained: Water/Aqua/Eau, Glycerin, Butyrospermum Parkii (Shea Butter), Caprylic/Capric Triglyceride, Cetyl Alcohol, Glyceryl Stea…

Source: incidecoder.comView reference →

Product

PCA Skin Hydrating Mask

PCA Skin Hydrating Mask PCA Skin Hydrating Mask ingredients explained: Water, Glycerin, Avena Sativa (Oat) Kernel Extract, Glycine Soja (Soybean) Oil, Carthamus Tinctorius (Safflower) Seed …

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side