Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

REN Clean Skincare Radiance Glow Daily Vitamin C Gel Cream Versus Paula's Choice Resist Super Antioxidant Serum

REN Clean Skincare Radiance Glow Daily Vitamin C Gel Cream Versus Paula's Choice Resist Super Antioxidant Serum This brightening moisturizer is formulated around Ascorbyl Glucoside and Hippophae Rhamnoides Oil to brighten dull-looking skin and fade the look of

REN Clean Skincare Radiance Glow Daily Vitamin C Gel Cream Versus Paula's Choice Resist Super Antioxidant Serum

This brightening moisturizer is formulated around Ascorbyl Glucoside and Hippophae Rhamnoides Oil to brighten dull-looking skin and fade the look of dark spots.

This anti-aging serum is formulated around Tetrahexyldecyl Ascorbate and Palmitoyl Tripeptide-5 to soften the look of wrinkles and brighten dull-looking skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Cetearyl Ethylhexanoate

Glycerin

Lauryl Laurate

Cetearyl Alcohol

Tapioca Starch

Ascorbyl Glucoside

Hydroxyacetophenone

Carbomer

Phenoxyethanol

Cetearyl Glucoside

Citrus Grandis Peel Oil

Glycogen

Hippophae Rhamnoides Oil

Citrus Aurantium Dulcis Flower Oil

Parfum

Tocopherol

Citrus Nobilis Peel Oil

Citrus Tangerina Peel Oil

Magnesium Ascorbyl Phosphate

Diglucosyl Gallic Acid

Ammonium Bicarbonate

Glucose

Helianthus Annuus Seed Oil

Rosmarinus Officinalis Leaf Extract

Sodium Hydroxide

Citral

Limonene

Linalool

Water, Cetearyl Ethylhexanoate, Glycerin, Lauryl Laurate, Cetearyl Alcohol, Tapioca Starch, Ascorbyl Glucoside, Hydroxyacetophenone, Carbomer, Phenoxyethanol, Cetearyl Glucoside, Citrus Grandis Peel Oil, Glycogen, Hippophae Rhamnoides Oil, Citrus Aurantium Dulcis Flower Oil, Parfum, Tocopherol, Citrus Nobilis Peel Oil, Citrus Tangerina Peel Oil, Magnesium Ascorbyl Phosphate, Diglucosyl Gallic Acid, Ammonium Bicarbonate, Glucose, Helianthus Annuus Seed Oil, Rosmarinus Officinalis Leaf Extract, Sodium Hydroxide, Citral, Limonene, Linalool

Cyclopentasiloxane

Dimethicone

Tetrahexyldecyl Ascorbate

Palmitoyl Tripeptide-5

Ceramide NP

Tocotrienols

Ubiquinone

Thioctic Acid

Tocopheryl Acetate

Ferulic Acid

Beta-Glucan

Superoxide Dismutase

Epigallocatechin Gallate

Ergothioneine

Glutathione

Xanthophylls

Glycine Soja Seed Extract

Arctostaphylos Uva Ursi Leaf Extract

Lupinus Albus Seed Extract

Curcuma Longa Root

Elaeis Guineensis Oil

Cyclopentasiloxane, Dimethicone, Tetrahexyldecyl Ascorbate, Palmitoyl Tripeptide-5, Ceramide NP, Tocotrienols, Tocopherol, Ubiquinone, Thioctic Acid, Tocopheryl Acetate, Magnesium Ascorbyl Phosphate, Ferulic Acid, Beta-Glucan, Superoxide Dismutase, Epigallocatechin Gallate, Ergothioneine, Glutathione, Xanthophylls, Glycine Soja Seed Extract, Glycerin, Arctostaphylos Uva Ursi Leaf Extract, Lupinus Albus Seed Extract, Curcuma Longa Root, Elaeis Guineensis Oil, Phenoxyethanol

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Magnesium Ascorbyl Phosphate (MAP) is a water-soluble form of Vitamin C. It is used in skincare because it tends to be more formulation friendly than pure vitamin C (ascorbic acid).

According to research, MAP has three major benefits:

While MAP is gentler on the skin than ascorbic acid, it is thought to be less easily absorbed into the skin.

In a well-known absorption study, pure vitamin C increased skin vitamin C levels when formulated correctly, but derivatives like MAP did not in that experiment. This suggests MAP may not always convert into active vitamin C in the skin.

Due to MAP's stability up to a pH level of 7, it is more stable to air and sunlight exposure than ascorbic acid. The best pH range for MAP is between 5 and 6.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
  4. 04Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
  5. 05Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
  6. 06Ceramide AP is is a skin-identical lipid that mimics what your skin already makes naturally. Ceramides help maintain epidermal integrity and barrier function.
  7. 07You'll often see this ingredient paired with other ceramides (like ceramide NP), cholesterol, or fatty acids because this combination best mimics the natural lipid mix your skin already has.
  8. 08The skin's ability to produce ceramides gets disrupted in skin conditions like eczema. This in turn weakens the skin barrier and applying ceramides topically has been shown to replenish what's been lost to restore barrier function.
  9. 09Most of the studies with Ceramide AP test it as part of a multi-ceramide complex; studies reinforce ceramide AP's role in rebalancing ceramides in skin and improving skin hydration.
  10. 10Disodium EDTA is a chelating agent. It grabs onto and deactivates metal ions that sneak into your products from water, packaging, or air.
  11. 11This ingredient mainly works behind the scenes and helps with:
  12. 12On top of that, this ingredient can counteract the effects of hard water by binding to the minerals in it.
  13. 13One thing worth knowing is that Disodium EDTA has been shown to be a mild penetration enhancer. It can help other ingredients absorb into skin more effectively which can be a double-edged sword (great for actives, but can also make the active too st…
  14. 14Clinical patch testing showed no significant skin irritation at typical use concentrations and minimal dermal absorption.
  15. 15You'll most likely see this ingredient near the end of an ingredient list. It's typically found in concentrations less than 1%.
  16. 16Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  17. 17Topically, glycerin does several things at once:
  18. 18Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
  19. 19Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
  20. 20This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side