Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Round Lab 1025 Dokdo Toner Versus Torriden Dive-In Low-Molecular Hyaluronic Acid Serum

Round Lab 1025 Dokdo Toner Versus Torriden Dive-In Low-Molecular Hyaluronic Acid Serum This hydrating toner is formulated around Protease and Panthenol to hydrate skin and calm redness. This hydrating serum is formulated around Panthenol and Hydrolyzed Hyaluro

Round Lab 1025 Dokdo Toner Versus Torriden Dive-In Low-Molecular Hyaluronic Acid Serum

This hydrating toner is formulated around Protease and Panthenol to hydrate skin and calm redness.

This hydrating serum is formulated around Panthenol and Hydrolyzed Hyaluronic Acid to hydrate skin and strengthen the skin barrier.

What's inside

Key Ingredients

Benefits

Concerns

No concerns

Ingredients Side-by-side

Water

Butylene Glycol

Glycerin

Pentylene Glycol

Propanediol

Chondrus Crispus Extract

Saccharum Officinarum Extract

Sea Water

1,2-Hexanediol

Protease

Betaine

Panthenol

Ethylhexylglycerin

Allantoin

Xanthan Gum

Disodium EDTA

Water, Butylene Glycol, Glycerin, Pentylene Glycol, Propanediol, Chondrus Crispus Extract, Saccharum Officinarum Extract, Sea Water, 1,2-Hexanediol, Protease, Betaine, Panthenol, Ethylhexylglycerin, Allantoin, Xanthan Gum, Disodium EDTA

Dipropylene Glycol

Sodium Hyaluronate Crosspolymer

Hydrolyzed Hyaluronic Acid

Sodium Hyaluronate

Sodium Acetylated Hyaluronate

Hydrolyzed Sodium Hyaluronate

Ectoin

Glycyrrhiza Glabra Root Extract

2,3-Butanediol

Trehalose

Portulaca Oleracea Extract

Hamamelis Virginiana Leaf Extract

Madecassoside

Madecassic Acid

Ceramide NP

Beta-Glucan

Malachite Extract

Cholesterol

Glyceryl Acrylate/Acrylic Acid Copolymer

Pvm/Ma Copolymer

Polyglyceryl-10 Laurate

Tromethamine

Carbomer

Scutellaria Baicalensis Root Extract

Paeonia Suffruticosa Root Extract

Water, Butylene Glycol, Glycerin, Dipropylene Glycol, 1,2-Hexanediol, Panthenol, Sodium Hyaluronate Crosspolymer, Hydrolyzed Hyaluronic Acid, Sodium Hyaluronate, Sodium Acetylated Hyaluronate, Hydrolyzed Sodium Hyaluronate, Allantoin, Ectoin, Glycyrrhiza Glabra Root Extract, 2,3-Butanediol, Trehalose, Betaine, Propanediol, Portulaca Oleracea Extract, Hamamelis Virginiana Leaf Extract, Madecassoside, Madecassic Acid, Ceramide NP, Beta-Glucan, Malachite Extract, Cholesterol, Pentylene Glycol, Glyceryl Acrylate/Acrylic Acid Copolymer, Pvm/Ma Copolymer, Polyglyceryl-10 Laurate, Xanthan Gum, Tromethamine, Carbomer, Ethylhexylglycerin, Scutellaria Baicalensis Root Extract, Paeonia Suffruticosa Root Extract

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.

It is a:

Humectant, drawing moisture into the skin

Emollient, helping to soften skin

Solvent, dispersing and stabilizing formulas

Preservative booster, enhancing the antimicrobial activity of other preservatives

Allantoin is a soothing ingredient known for its protective and moisturizing properties; it's basically a quiet workhorse ingredient you can find in a huge range of cosmetics.

Though it can be derived from the comfrey plant, allantoin is produced synthetically for cosmetic products to ensure purity.

Research shows it can encourage your skin cells to turn over and renew by stimulating keratinocyte and fibroblast proliferation.

It also has mild keratolytic properties to help loosen and shed dead skin cells without being harsh.

Studies also suggest allantoin can help calm inflammation by dialing down some of the chemical signals your skin sends out when it is irritated.

This ingredient is typically used in the 0.1-0.5% range, and the FDA recognizes it as a skin protectant in OTC products up to 2%.

Overall, allantoin is a wonderful addition to most routines; it is stable across a wide pH range (~4-8), works well with other ingredients, and is considered non-sensitizing/non-irritating.

Fun fact: Allantoin is naturally occurring in comfrey root, beets, chamomile, and wheat sprouts. Our bodies even produce it as a byproduct of uric acid metabolism.

Betaine is a humectant. Like hyaluronic acid, it helps attract and retain moisture in the skin. It’s known for being gentle and for helping the skin maintain balanced hydration.

Betaine is mainly used to improve hydration and support calmer skin. It helps skin cells regulate water balance because it functions as an osmolyte.

Some studies suggest betaine may support making skin tone more even.

Fun fact: Betaine naturally exists in the skin and the body. In cosmetic products, it can be either plant-derived (most commonly from sugar beets) or synthetically produced for consistency and stability.

Betaine is also known as trimethylglycine.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Panthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.

There are two forms of panthenol: D and L.

D-panthenol is also known as dexpanthenol. Most cosmetics use dexpanthenol or a mixture of D and L-panthenol.

Panthenol is famous due to its ability to go deeper into the skin's layers. Using this ingredient has numerous pros (and no cons):

Like hyaluronic acid, panthenol is a humectant. Humectants are able to bind and hold large amounts of water to keep skin hydrated.

This ingredient works well for wound healing. It works by increasing tissue in the wound and helps close open wounds.

Once oxidized, panthenol converts to pantothenic acid. Panthothenic acid is found in all living cells.

This ingredient is also referred to as pro-vitamin B5.

Pentylene Glycol (1,2-pentanediol) is a multitasking little diol with three main roles in a formula:

Research on alkanediols (the family pentylene glycol belongs to) show they work by disrupting microbial cell membranes. This disruption helps the primary preservative system in a product work more effectively at lower doses.

On the safety side, the Cosmetic Ingredient Review Expert Panel has concluded this ingredient to be safe as used in current cosmetic practices + concentrations.

Typical use levels in a formula run about 1-5%.

Propanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.

It’s often used to:

Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Swanson Hyaluronic Acid SerumIngredients explained

  1. 01Good old water, aka H2O. The most common skincare ingredient of all. You can usually find it right in the very first spot of the ingredient list, meaning it’s the biggest thing out of all the stuff that makes up the product.
  2. 02It’s mainly a solvent for ingredients that do not like to dissolve in oils but rather in water.
  3. 03Expand to read more
  4. 04Once inside the skin, it hydrates, but not from the outside - putting pure water on the skin (hello long baths!) is drying.
  5. 05One more thing: the water used in cosmetics is purified and deionized (it means that almost all of the mineral ions inside it is removed). Like this, the products can stay more stable over time.
  6. 06A natural moisturizer that’s also in our skin
  7. 07A super common, safe, effective and cheap molecule used for more than 50 years
  8. 08Not only a simple moisturizer but knows much more: keeps the skin lipids between our skin cells in a healthy (liquid crystal) state, protects against irritation, helps to restore barrier
  9. 09Effective from as low as 3% with even more benefits for dry skin at higher concentrations up to 20-40%
  10. 10High-glycerin moisturizers are awesome for treating severely dry skin
  11. 11Aloe Vera is one of today’s magic plants. It does have some very nice properties indeed, though famous dermatologist Leslie Baumann warns us in her book that most of the evidence is anecdotal and the plant might be a bit overhyped.
  12. 12What research does confirm about Aloe is that it’s a great moisturizer and has several anti-inflammatory (among others contains salicylates, polysaccharides, magnesium lactate and C-glucosyl chromone) as well as some antibacterial components. It als…
  13. 13It’s the - sodium form - cousin of the famous NMF, hyaluronic acid (HA). If HA does not tell you anything we have a super detailed, geeky explanation about it here. The TL; DR version of HA is that it's a huge polymer (big molecule from repeated sub…
  14. 14As far as skincare goes, sodium hyaluronate and hyaluronic acid are pretty much the same and the two names are used interchangeably. As cosmetic chemist kindofstephen writes on reddit "sodium hyaluronate disassociates into hyaluronic acid molecule a…
  15. 15In spite of this, if you search for "hyaluronic acid vs sodium hyaluronate" you will find on multiple places that sodium hyaluronate is smaller and can penetrate the skin better. Chemically, this is definitely not true, as the two forms are almost t…
  16. 16What seems to be a true difference, though, is that the salt form is more stable, easier to formulate and cheaper so it pops up more often on the ingredient lists.
  17. 17If you wanna become a real HA-and-the-skin expert you can read way more about the topic at hyaluronic acid (including penetration-questions, differences between high and low molecular weight versions and a bunch of references to scientific literature).
  18. 18It's one of the most commonly used thickeners and emulsion stabilizers. If the product is too runny, a little xanthan gum will make it more gel-like. Used alone, it can make the formula sticky and it is a good team player so it is usually combined w…
  19. 19Btw, Xanthan gum is all natural, a chain of sugar molecules (polysaccharide) produced from individual sugar molecules (glucose and sucrose) via fermentation. It’s approved by Ecocert and also used in the food industry (E415).
  20. 20Chamomile probably needs no introduction as it's one of the most widely used medicinal herbs. You probably drink it regularly as a nice, calming cup of tea and it's also a regular on skincare ingredient lists.
Source · incidecoder.com
02

Product index

Related product references

Product

Kylie Skin Hyaluronic Acid Serum

Kylie Skin Hyaluronic Acid Serum Ingredients in Kylie Skin Hyaluronic Acid Serum explained: benefits, concerns, and detailed analysis of 35 ingredients including Water, Glycerin, and Propan…

Source: skinsort.comView reference →

Product

Procsin Hyaluronic Acid Serum

Procsin Hyaluronic Acid Serum Procsin Hyaluronic Acid Serum ingredients explained: Aqua(Water), Glycerin, Propylene Glycol, Pentylene Glycol, Sodium Hyaluronate, Phenoxyethanol, PEG-40 Hydr…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side

04

Ask the journal

Related questions

01How to Apply Face Serums

Skincare rules can get confusing, but when it comes to application the general rule of thumb is to pay attention to the product’s consistency. “Apply the lightest, thinnest product first and the heaviest, and more dense products last, since thinner products can’t penetrate thicker products,”says Dr. Lewis. After cleansing the face and following up with a toner, let the skin dry before using a serum. You can layer different serums on top of each other or opt for a product that has a precise mix of multiple hero ingredients, such as hyaluronic acid and vitamin C.

Source · www.skincare.com
02What Skin Types Should Use Hyaluronic Acid?

“Hyaluronic acid is particularly helpful for those experiencing dry skin, and for those desiring a plumping effect,” explains Dr. King. But, if you have an oily skin type, don’t discredit hyaluronic acid from your routine just yet. Despite the excess sebum that you may experience, it’s important to keep your skin hydrated so that it doesn’t overcompensate and produce even more oil as a result. Besides your skin type, you should also look at the condition of your skin to decide if it’s time to begin using hyaluronic acid. “If your skin is starting to look dull, flaky and you’re seeing more pronounced fine lines and wrinkles, that’s a pretty good indication that it’s time to add this ingredient to your routine,” adds O’Conner.

Source · www.skincare.com