Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

The INKEY List Retinol Serum Versus Philosophy renewed hope in a jar serum

The INKEY List Retinol Serum Versus Philosophy renewed hope in a jar serum This anti-aging serum is formulated around Retinyl Acetate and Palmitoyl Tetrapeptide-7 to soften the look of wrinkles and refine skin texture. This brightening serum is formulated arou

The INKEY List Retinol Serum Versus Philosophy renewed hope in a jar serum

This anti-aging serum is formulated around Retinyl Acetate and Palmitoyl Tetrapeptide-7 to soften the look of wrinkles and refine skin texture.

This brightening serum is formulated around Glutathione and Ascorbyl Glucoside to brighten dull-looking skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Glycerin

Butylene Glycol

Propanediol

Dicaprylyl Carbonate

Retinyl Acetate

Dimethicone

Phenoxyethanol

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Caprylyl Glycol

Phospholipids

Squalane

Glycine Soja Oil

Carbomer

Polysorbate 60

Tocopheryl Acetate

Glycolipids

Sodium Hydroxide

Sodium Phytate

Sorbitan Isostearate

Glycine Soja Sterols

Tetrahexyldecyl Ascorbate

Leuconostoc/Radish Root Ferment Filtrate

Hyaluronic Acid

Sodium Lactate

Tocopherol

Polysorbate 20

Palmitoyl Tetrapeptide-7

Palmitoyl Tripeptide-1

Water, Glycerin, Butylene Glycol, Propanediol, Dicaprylyl Carbonate, Retinyl Acetate, Dimethicone, Phenoxyethanol, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Caprylyl Glycol, Phospholipids, Squalane, Glycine Soja Oil, Carbomer, Polysorbate 60, Tocopheryl Acetate, Glycolipids, Sodium Hydroxide, Sodium Phytate, Sorbitan Isostearate, Glycine Soja Sterols, Tetrahexyldecyl Ascorbate, Leuconostoc/Radish Root Ferment Filtrate, Hyaluronic Acid, Sodium Lactate, Tocopherol, Polysorbate 20, Palmitoyl Tetrapeptide-7, Palmitoyl Tripeptide-1

Pentylene Glycol

Bis-PEG-18 Methyl Ether Dimethyl Silane

1,2-Hexanediol

Hydrolyzed Soy Protein

PPG-26-Buteth-26

PEG-40 Hydrogenated Castor Oil

Parfum

Allantoin

Glyceryl Polyacrylate

Disodium EDTA

Glutathione

Ascorbyl Glucoside

Evodia Rutaecarpa Fruit Extract

Dimethylmethoxy Chromanol

Potassium Ascorbyl Tocopheryl Phosphate

Maltodextrin

Sodium Hyaluronate

Jasminum Officinale Flower Extract

Potassium Sorbate

Resveratrol

Limonene

Aloe Barbadensis Leaf Juice

Citral

BHT

Ethylhexylglycerin

Benzyl Alcohol

Water, Pentylene Glycol, Glycerin, Bis-PEG-18 Methyl Ether Dimethyl Silane, 1,2-Hexanediol, Caprylyl Glycol, Propanediol, Carbomer, Hydrolyzed Soy Protein, Butylene Glycol, PPG-26-Buteth-26, PEG-40 Hydrogenated Castor Oil, Parfum, Sodium Hydroxide, Allantoin, Glyceryl Polyacrylate, Disodium EDTA, Phenoxyethanol, Glutathione, Ascorbyl Glucoside, Evodia Rutaecarpa Fruit Extract, Dimethylmethoxy Chromanol, Potassium Ascorbyl Tocopheryl Phosphate, Maltodextrin, Sodium Hyaluronate, Jasminum Officinale Flower Extract, Potassium Sorbate, Polysorbate 20, Resveratrol, Limonene, Aloe Barbadensis Leaf Juice, Citral, BHT, Ethylhexylglycerin, Palmitoyl Tripeptide-1, Palmitoyl Tetrapeptide-7, Benzyl Alcohol

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.

Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.

It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.

Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.

A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Palmitoyl Tetrapeptide-7 (formerly Palmitoyl Tetrapeptide-3) is a synthetic peptide. Its main job is to fight what researchers call "inflammaging".

"Inflammaging" is the slow, low-grade chronic inflammation that quietly breaks down collagen as we age.

This ingredient calms down a specific inflammation signal in your skin cells (called IL-6). When left unchecked, this signal triggers enzymes that break down collagen and elastin.

Clinical testing showed statistically significant improvements in:

Studies also found the more of this ingredient used, the more your skin produces Collagen I, fibronectin, and hyaluronic acid.

You'll likely see this ingredient paired with Palmitoyl Tripeptide-1 in the well-known Matrixyl 3000 complex for enhanced anti-aging effects.

A 3% concentration applied twice daily for two months showed meaningful skin rejuvenation results in clinical panels.

Fungal acne note: Usually a palmitic acid component can feed Malassezia in unbound form, but here is is covalently bonded to the peptide. This means it is very difficult for Malassezia to access, and therefore very unlikely to cause fungal acne.

Palmitoyl Tripeptide-1 (aka Pal-GHK) is a synthetic signal peptide made of three amino acids attached to palmitic acid.

That fatty acid attachment is the key: it boosts the peptide's ability to penetrate the skin barrier. This puts it closer to the dermal cells where it can actually make a difference.

Once there, it acts as a matrikine, a signaling peptide that prompts fibroblasts to produce more collagen, fibronectin, and hyaluronic acid.

In vitro studies show it can boost collagen production in skin cells even when UV-damaged skin samples were treated with it at a tiny concentration (it almost fully restored dermal collagen at 5ppm). It achieved this at 100x lower concentration than retinoic acid, which needed 500 ppm to do the same thing.

Human clinical data is promising, but modest:

A study of 23 female volunteers found a small but statistically significant increase (~4%) in skin thickness after treatment at 4 ppm.

A separate small trial of 15 women showed statistically significant reductions in wrinkle length, depth, and skin roughness after applying it twice daily for four weeks.

You'll likely see Pal-GHK paired with Palmitoyl Tetrapeptide-7 as part of the Matrixyl 3000 complex.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Polysorbate 20 is a gentle, water-soluble emulsifier and mild surfactant. It stops oil and water from separating to keep your formulas blended and stable.

It also acts as a mild penetration enhancer by helping active ingredients absorb slightly better.

The common safety discussion around this ingredient involves a manufacturing byproduct called 1,4-dioxane.

Trace amounts can form during production but the EU's Scientific Committee on Consumer Safety has concluded that levels at/below 10 ppm in finished products are safe (commercial products consistently fall within acceptable margins).

True allergic reactions are uncommon and the CIR Expert Panel has confirmed this ingredient to be safe as used in cosmetics.

Because it is derived from lauric acid, it may not be fungal acne safe.

Propanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.

It’s often used to:

Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.

Sodium Hydroxide is also known as lye or caustic soda. It is used to adjust the pH of products; many ingredients require a specific pH to be effective.

In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.

Your skin has a natural pH and acid mantle. This acid mantle helps prevent harmful bacteria from breaking through. The acid mantle also helps keep your skin hydrated.

"Alkaline" refers to a high pH level. A low pH level would be considered acidic.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.
  4. 04Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.
  5. 05In practice, that translates to a long shelf life and a consistently elegant skin feel.
  6. 06While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.
  7. 07Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.
  8. 08This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.
  9. 09This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures…
  10. 10Cetearyl alcohol is a waxy mixture of two fatty alcohols: cetyl alcohol and stearyl alcohol. It is an emollient and emulsifier.
  11. 11Despite having "alcohol" in its name, it has nothing to do with drying solvent alcohols; the FDA also allows "alcohol-free" products to contain fatty alcohols like this ingredient.
  12. 12It plays several roles in a formula:
  13. 13Typical use levels for this ingredient sit around 1-10% and the Cosmetic Ingredient Review Expert Panel has affirmed safety at concentrations up to 25% in leave-on products.
  14. 14Multiple assessments have found it to be non-irritating and non-sensitizing to most people.
  15. 15However, there have been some cases of allergic contact dermatitis in patients with chronically compromised skin barriers.
  16. 16Cetearyl alcohol has a comedogenic rating of 2 and irritancy rating of 1. Both of these numbers come from the 1989 study that used rabbit ears; a "2" means mildly comedogenic and a "1" means low irritancy.
  17. 17Here's the catch: rabbit skin is more sensitive than human skin and throws a lot of false positives. A 1996 reappraisal found that ingredients rated 1-2 in the rabbit ear tests are generally safe for humans.
  18. 18Remember comedogenic ratings are unable to assess the entire formula of a product or how it will react on your skin. Just be sure to patch test if you are unsure about certain ingredients.
  19. 19This ingredient is not fungal acne safe. Cetearyl alcohol is a fatty alcohol with chain lengths that fall within the range that Malassezia can metabolize.
  20. 20A 2019 study has also observed Malassezia growth in the presence of this ingredient, confirming it to be not-fungal acne safe.
Source · skinsort.com
02

Product index

Related product references

Product

The Inkey List Glycolic Acid Toner

The Inkey List Glycolic Acid Toner The Inkey List Glycolic Acid Toner ingredients explained: Aqua (Water), Glycolic Acid, Propanediol, Hamamelis Virginiana (Witch Hazel) Water, Sodium Hydro…

Source: incidecoder.comView reference →

Product

The Inkey List Snow Mushroom

The Inkey List Snow Mushroom The Inkey List Snow Mushroom ingredients explained: Aqua (Water/Eau), Butylene Glycol, Glycerin, Sodium Acrylates Copolymer, Phenoxyethanol, Sodium Caproyl Prol…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side