Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Torriden Dive-In Low-Molecular Hyaluronic Acid Serum Versus PURITO Wonder Releaf Centella Serum Unscented

Torriden Dive-In Low-Molecular Hyaluronic Acid Serum Versus PURITO Wonder Releaf Centella Serum Unscented This hydrating serum is formulated around Panthenol and Hydrolyzed Hyaluronic Acid to hydrate skin and strengthen the skin barrier. This calming serum is

Torriden Dive-In Low-Molecular Hyaluronic Acid Serum Versus PURITO Wonder Releaf Centella Serum Unscented

This hydrating serum is formulated around Panthenol and Hydrolyzed Hyaluronic Acid to hydrate skin and strengthen the skin barrier.

This calming serum is formulated around Centella Asiatica Extract and Niacinamide to calm redness and strengthen the skin barrier.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Butylene Glycol

Glycerin

Dipropylene Glycol

1,2-Hexanediol

Panthenol

Sodium Hyaluronate Crosspolymer

Hydrolyzed Hyaluronic Acid

Sodium Hyaluronate

Sodium Acetylated Hyaluronate

Hydrolyzed Sodium Hyaluronate

Allantoin

Ectoin

Glycyrrhiza Glabra Root Extract

2,3-Butanediol

Trehalose

Betaine

Propanediol

Portulaca Oleracea Extract

Hamamelis Virginiana Leaf Extract

Madecassoside

Madecassic Acid

Ceramide NP

Beta-Glucan

Malachite Extract

Cholesterol

Pentylene Glycol

Glyceryl Acrylate/Acrylic Acid Copolymer

Pvm/Ma Copolymer

Polyglyceryl-10 Laurate

Xanthan Gum

Tromethamine

Carbomer

Ethylhexylglycerin

Scutellaria Baicalensis Root Extract

Paeonia Suffruticosa Root Extract

Water, Butylene Glycol, Glycerin, Dipropylene Glycol, 1,2-Hexanediol, Panthenol, Sodium Hyaluronate Crosspolymer, Hydrolyzed Hyaluronic Acid, Sodium Hyaluronate, Sodium Acetylated Hyaluronate, Hydrolyzed Sodium Hyaluronate, Allantoin, Ectoin, Glycyrrhiza Glabra Root Extract, 2,3-Butanediol, Trehalose, Betaine, Propanediol, Portulaca Oleracea Extract, Hamamelis Virginiana Leaf Extract, Madecassoside, Madecassic Acid, Ceramide NP, Beta-Glucan, Malachite Extract, Cholesterol, Pentylene Glycol, Glyceryl Acrylate/Acrylic Acid Copolymer, Pvm/Ma Copolymer, Polyglyceryl-10 Laurate, Xanthan Gum, Tromethamine, Carbomer, Ethylhexylglycerin, Scutellaria Baicalensis Root Extract, Paeonia Suffruticosa Root Extract

Centella Asiatica Extract

Niacinamide

Asiaticoside

Asiatic Acid

Centella Asiatica Callus Extracellular Vesicles

Palmitoyl Tetrapeptide-7

Palmitoyl Hexapeptide-12

Palmitoyl Tripeptide-1

Palmitoyl Dipeptide-10

Polyglyceryl-10 Myristate

Hydrolyzed Jojoba Esters

Dipotassium Glycyrrhizate

Adenosine

Disodium EDTA

Sucrose Stearate

Glyceryl Stearate

Hydrogenated Lecithin

Polyglyceryl-10 Stearate

Camellia Sinensis Leaf Extract

Pancratium Maritimum Extract

Water, Glycerin, Dipropylene Glycol, Propanediol, Centella Asiatica Extract, Butylene Glycol, Niacinamide, 1,2-Hexanediol, Sodium Hyaluronate, Panthenol, Madecassoside, Asiaticoside, Madecassic Acid, Asiatic Acid, Allantoin, Centella Asiatica Callus Extracellular Vesicles, Palmitoyl Tetrapeptide-7, Palmitoyl Hexapeptide-12, Palmitoyl Tripeptide-1, Palmitoyl Dipeptide-10, Carbomer, Polyglyceryl-10 Laurate, Polyglyceryl-10 Myristate, Hydrolyzed Jojoba Esters, Tromethamine, Ethylhexylglycerin, Xanthan Gum, Dipotassium Glycyrrhizate, Adenosine, Disodium EDTA, Sucrose Stearate, Glyceryl Stearate, Hydrogenated Lecithin, Polyglyceryl-10 Stearate, Ceramide NP, Camellia Sinensis Leaf Extract, Pancratium Maritimum Extract

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

1,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.

It is a:

Humectant, drawing moisture into the skin

Emollient, helping to soften skin

Solvent, dispersing and stabilizing formulas

Preservative booster, enhancing the antimicrobial activity of other preservatives

Allantoin is a soothing ingredient known for its protective and moisturizing properties; it's basically a quiet workhorse ingredient you can find in a huge range of cosmetics.

Though it can be derived from the comfrey plant, allantoin is produced synthetically for cosmetic products to ensure purity.

Research shows it can encourage your skin cells to turn over and renew by stimulating keratinocyte and fibroblast proliferation.

It also has mild keratolytic properties to help loosen and shed dead skin cells without being harsh.

Studies also suggest allantoin can help calm inflammation by dialing down some of the chemical signals your skin sends out when it is irritated.

This ingredient is typically used in the 0.1-0.5% range, and the FDA recognizes it as a skin protectant in OTC products up to 2%.

Overall, allantoin is a wonderful addition to most routines; it is stable across a wide pH range (~4-8), works well with other ingredients, and is considered non-sensitizing/non-irritating.

Fun fact: Allantoin is naturally occurring in comfrey root, beets, chamomile, and wheat sprouts. Our bodies even produce it as a byproduct of uric acid metabolism.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.

Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.

It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.

Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.

A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.

Ceramide NP (formerly known as Ceramide 3) is one of the skin's naturally occurring lipids.

Since ceramides are the major lipid components of the skin, they are crucial for maintaining skin barrier and hydration. Ceramide NP most closely mirrors the dominant kind in human skin amongst ceramide subtypes.

This ceramide works by slotting into gaps within the stratum corneum's lipid matrix to limit trans-epidermal water loss (TEWL) and shield the skin against external irritants.

A study with 312 patients found that using a ceramide-containing routine for 4 weeks reduced the severity of atopic dermatitis by over 61%.

Another clinical study in subjects aged 60 and older found that a ceramide body wash and moisturizer improved skin dryness and itchy skin in 15 days.

Overall, ceramides are considered non-irritating and safety tests have found little to no observable adverse effects from using this ingredient.

Ceramide NP is usually sourced from plants (like soybean or rice bran), or produced synthetically.

Dipropylene Glycol is a synthetically created humectant, stabilizer, and solvent.

This ingredient helps:

Dipropylene glycol is technically an alcohol, but it belongs to the glycol family (often considered part of the ‘good’ alcohols). This means it is hydrating and gentle on skin unlike drying solvent alcohols like denatured alcohol.

As a masking agent, Dipropylene Glycol can be used to cover the smell of other ingredients. However, it does not have a scent.

Studies show Dipropylene Glycol is considered safe to use in skincare.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Madecassic Acid is one of the four star actives in Centella Asiatica. In skincare, it earns its keep as a calming and repairing ingredient.

It works through the same core pathways as the rest of the centella family.

First, it turns down inflammation so it helps with things like redness and general upset skin.

Second, it acts as an antioxidant which means it helps protect skin from daily stress and damage.

And third, it nudges the skin to make more collagen and rebuild its support structure.

That combination is why the whole Centella family is known for calming skin, strengthening the barrier, fading redness, and giving anti-aging benefits.

It's worth being honest about the evidence here; a lot of the strongest data is on the full extract or a Madecassoside/Asiaticoside rather than Madecassic Acid alone. Reviewers also note more long-term clinical trials are needed to confirm the full potential.

Concentration-wise, this ingredient is rarely used pure and usually shows up as part of a standardized centella extract where reported content ranges from 0.02-3.06%.

Finished products typically run somewhere in the 0.1-10% range depending on the format.

In real-world tolerance tests, a repeat-insult patch test on an eye lotion with 0.2% Centella extract showed no irritation or allergic contact dermatitis in 54 subjects. And a mascara with 0.5% Madecassoside caused neither irritation nor sensitization in 109 subjects.

Allergy risk is very low, but not zero. Centella and its constituents are classified as weak contact sensitizers and some rare cases of allergic contact dermatitis exist.

Madecassoside is one of four active compounds found in Centella asiatica and is one of the main reasons Centella is so effective at calming irritated skin and supporting the moisture barrier.

There's a solid body of peer-reviewed research backing Madecassoside for several skin benefits. Studies have found:

Madecassoside pairs well with other hydrating or antioxidant ingredients like Ascorbic Acid or Hyaluronic Acid.

Panthenol is a common ingredient that helps hydrate and soothe the skin. It is found naturally in our skin and hair.

There are two forms of panthenol: D and L.

D-panthenol is also known as dexpanthenol. Most cosmetics use dexpanthenol or a mixture of D and L-panthenol.

Panthenol is famous due to its ability to go deeper into the skin's layers. Using this ingredient has numerous pros (and no cons):

Like hyaluronic acid, panthenol is a humectant. Humectants are able to bind and hold large amounts of water to keep skin hydrated.

This ingredient works well for wound healing. It works by increasing tissue in the wound and helps close open wounds.

Once oxidized, panthenol converts to pantothenic acid. Panthothenic acid is found in all living cells.

This ingredient is also referred to as pro-vitamin B5.

Polyglyceryl-10 Laurate is a cleansing agent and emulsifier.

It rounds up dirt, oil, and grime, so they can be rinsed off easily as a cleanser.

On the emulsifier side, it keeps your formula smooth and well-mixed by playing peacekeeper for ingredients that don't naturally get along (like oil and water).

Because it has a C12 (lauric acid) fatty acid chain, this ingredient can potentially feed the Malassezia yeast that causes fungal acne. The Malassezia yeast prefers esters with C11-C24 fatty acids.

This ingredient is an ester of lauric acid and Polyglycerin-10.

Propanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.

It’s often used to:

Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Tromethamine (aka THAM) is a synthetic amino acid that shows up in skincare as a helper ingredient.

It functions as a pH adjuster to help neutralize acidic ingredients and set a formula's pH to the right spot.

This matters a lot because a lot of actives (like vitamin C) needs a specific pH to work well and feel comfortable on skin.

Concentration use ranges from 0.1-1.0% depending on the formula.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 031,2-Hexanediol is a synthetic liquid and another multi-functional powerhouse.
  4. 04It is a:
  5. 05Humectant, drawing moisture into the skin
  6. 06Emollient, helping to soften skin
  7. 07Solvent, dispersing and stabilizing formulas
  8. 08Preservative booster, enhancing the antimicrobial activity of other preservatives
  9. 09Beta-Glucan is a soluble polysaccharide (a chain of glucose sugars) sourced from the cells walls of oats, baker's yeast, mushrooms, and seaweed.
  10. 10It's a rare ingredient that pulls double-duty as a heavy-duty hydrator and skin-soothing repair agent.
  11. 11On the surface, it acts as a humectant that holds water in place and reduces moisture loss for a plumper, smoother feel, while its anti-inflammatory and antioxidant properties make it a great pick for calming redness or sensitive skin
  12. 12The more interesting story is underneath:
  13. 13Despite its large molecular size, oat beta-glucan has been shown to penetrate the epidermis and reach the dermis by slipping between skin cells. Here, it interacts with fibroblasts and macrophages to nudge collagen synthesis and support wound repair.
  14. 14A small 2005 split-face clinical study of 27 subjects found topical beta-glucan produced measurable reductions in wrinkle depth, height, and roughness after 8 weeks of use.
  15. 15It is worth noting the trial was small and the penetration testing used frozen, irradiated skin so the anti-aging data is encouraging rather than definitive.
  16. 16This ingredient gets along with pretty much everything and is typically used around 0.1-1%.
  17. 17Fungal acne: This ingredient is not a food source for the Malassezia yeast because it is a glucose polysaccharide with no fatty acid or ester component.
  18. 18Betaine is a humectant. Like hyaluronic acid, it helps attract and retain moisture in the skin. It’s known for being gentle and for helping the skin maintain balanced hydration.
  19. 19Betaine is mainly used to improve hydration and support calmer skin. It helps skin cells regulate water balance because it functions as an osmolyte.
  20. 20Some studies suggest betaine may support making skin tone more even.
Source · skinsort.com
02

Product index

Related product references

Product

ABI Skincare Hyaluronic Acid Serum

ABI Skincare Hyaluronic Acid Serum ABI Skincare Hyaluronic Acid Serum ingredients explained: Water, Glycerin, Trehalose, Propylene Glycol, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Trie…

Source: incidecoder.comView reference →

Product

Dermedicine Hyaluronic Acid Serum

Dermedicine Hyaluronic Acid Serum Dermedicine Hyaluronic Acid Serum ingredients explained: Water (Aqua), Sodium Hyaluronate, Phenoxyethanol, Ethylhexylglycerin Show all ingredients by funct…

Source: incidecoder.comView reference →

Product

grace & stella Hyaluronic Acid Serum

grace & stella Hyaluronic Acid Serum grace & stella Hyaluronic Acid Serum ingredients explained: Water/Eau/Aqua, Sodium Hyaluronate, Sodium Hyaluronate Crosspolymer, Panthenol, Ahnfeltia Co…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side

04

Ask the journal

Related questions

01What Skin Types Should Use Hyaluronic Acid?

“Hyaluronic acid is particularly helpful for those experiencing dry skin, and for those desiring a plumping effect,” explains Dr. King. But, if you have an oily skin type, don’t discredit hyaluronic acid from your routine just yet. Despite the excess sebum that you may experience, it’s important to keep your skin hydrated so that it doesn’t overcompensate and produce even more oil as a result. Besides your skin type, you should also look at the condition of your skin to decide if it’s time to begin using hyaluronic acid. “If your skin is starting to look dull, flaky and you’re seeing more pronounced fine lines and wrinkles, that’s a pretty good indication that it’s time to add this ingredient to your routine,” adds O’Conner.

Source · www.skincare.com
02How to Apply Face Serums

Skincare rules can get confusing, but when it comes to application the general rule of thumb is to pay attention to the product’s consistency. “Apply the lightest, thinnest product first and the heaviest, and more dense products last, since thinner products can’t penetrate thicker products,”says Dr. Lewis. After cleansing the face and following up with a toner, let the skin dry before using a serum. You can layer different serums on top of each other or opt for a product that has a precise mix of multiple hero ingredients, such as hyaluronic acid and vitamin C.

Source · www.skincare.com