Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Ultra Violette Fave Fluid SPF 50+ Ultralight Skinscreen Versus Paula's Choice Resist Youth-Extending Daily Hydrating Fluid SPF 50

Ultra Violette Fave Fluid SPF 50+ Ultralight Skinscreen Versus Paula's Choice Resist Youth-Extending Daily Hydrating Fluid SPF 50 This chemical sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50. This hybrid sunscreen covers the full UV range

Ultra Violette Fave Fluid SPF 50+ Ultralight Skinscreen Versus Paula's Choice Resist Youth-Extending Daily Hydrating Fluid SPF 50

This chemical sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.

This hybrid sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Isoamyl Laurate

Alcohol Denat.

Polyester-8

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

Phenylbenzimidazole Sulfonic Acid

Butyl Methoxydibenzoylmethane

Phenyl Trimethicone

Caprylyl Methicone

Propanediol

Aluminum Starch Octenylsuccinate

Ethylhexyl Triazone

Sodium Hydroxide

Acrylates/C12-22 Alkyl Methacrylate Copolymer

PEG-40 Hydrogenated Castor Oil

Hydroxyacetophenone

Acrylates Copolymer

Phenoxyethanol

Niacinamide

Disodium Lauriminodipropionate Tocopheryl Phosphates

Hydrolyzed Adansonia Digitata Seed Extract

Hydrolyzed Soy Protein

Rice Amino Acids

Proline

Arginine

Coco-Glucoside

Disodium Lauryl Sulfosuccinate

Ascorbyl Glucoside

Hydroxystearic Acid

Water, Isoamyl Laurate, Alcohol Denat., Polyester-8, Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, Phenylbenzimidazole Sulfonic Acid, Butyl Methoxydibenzoylmethane, Phenyl Trimethicone, Caprylyl Methicone, Propanediol, Aluminum Starch Octenylsuccinate, Ethylhexyl Triazone, Sodium Hydroxide, Acrylates/C12-22 Alkyl Methacrylate Copolymer, PEG-40 Hydrogenated Castor Oil, Hydroxyacetophenone, Acrylates Copolymer, Phenoxyethanol, Niacinamide, Disodium Lauriminodipropionate Tocopheryl Phosphates, Hydrolyzed Adansonia Digitata Seed Extract, Hydrolyzed Soy Protein, Rice Amino Acids, Proline, Arginine, Coco-Glucoside, Disodium Lauryl Sulfosuccinate, Ascorbyl Glucoside, Hydroxystearic Acid

Butyl Methoxydibenzoylmethane 2%

Ethylhexyl Methoxycinnamate 7.5%

Ethylhexyl Salicylate 5%

Octocrylene 2%

Glycerin

Silica

Dimethicone

Tocopherol

Chamomilla Recutita Flower Extract

Vitis Vinifera Seed Extract

Camellia Sinensis Leaf Extract

Camellia Oleifera Leaf Extract

Peucedanum Graveolens Extract

Sambucus Nigra Fruit Extract

Avena Sativa Bran Extract

Punica Granatum Extract

Lycium Barbarum Fruit Extract

Hydrogenated Lecithin

Titanium Dioxide

Dimethicone/Vinyl Dimethicone Crosspolymer

Diethylhexyl Syringylidenemalonate

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Xanthan Gum

Sodium Carbomer

Benzyl Alcohol

Sodium Benzoate

Potassium Sorbate

Butyl Methoxydibenzoylmethane 2%, Ethylhexyl Methoxycinnamate 7.5%, Ethylhexyl Salicylate 5%, Octocrylene 2%, Water, Glycerin, Silica, Dimethicone, Tocopherol, Chamomilla Recutita Flower Extract, Vitis Vinifera Seed Extract, Camellia Sinensis Leaf Extract, Camellia Oleifera Leaf Extract, Peucedanum Graveolens Extract, Sambucus Nigra Fruit Extract, Avena Sativa Bran Extract, Punica Granatum Extract, Lycium Barbarum Fruit Extract, Hydrogenated Lecithin, Titanium Dioxide, Dimethicone/Vinyl Dimethicone Crosspolymer, Diethylhexyl Syringylidenemalonate, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Xanthan Gum, Sodium Carbomer, Benzyl Alcohol, Sodium Benzoate, Potassium Sorbate, Phenoxyethanol

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Also known as Avobenzone, this ingredient is an oil-soluble used to absorb the full spectrum of UVA rays (peak 357 nm).

It's one of the most effective UVA filters available but has a major caveat of photostability: avobenzone is susceptible to photodegradation.

This means it can lose efficacy when exposed to sunlight without the help of a stabilizing agent.

Studies show antioxidants (like vitamin E or vitamin C) and some UV filters (like octocrylene and Tinosorb S) can meaningfully improve its stability in a formulation.

The maximum allowable concentration according to regulation is 3% in the US + Canada, and 5% in the EU, Australia, China, Korea, and ASEAN countries.

It has a well-support safety profile: a comprehensive 2025 review found minimal toxicity with no evidence of carcinogenicity.

Overall, avobenzone is a safe and regulated ingredient used in sunscreen for over 40 years.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:
  4. 04Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.
  5. 05Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.
  6. 06Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.
  7. 07Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.
  8. 08Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).
  9. 09Ethylhexyl Stearate mainly acts as an emollient that helps hydate skin. It can also be used to reduce the greasiness of oils in a formula.
  10. 10Because this ingredient contains a C18 fatty acid chain, it may not be Malassezia/fungal acne safe. This is because the Malassezia yeast potentially feeds on C11-C24 fatty acids.
  11. 11This ingredient is an ester of 2-ethylhexyl alcohol and stearic acid.
  12. 12Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  13. 13Topically, glycerin does several things at once:
  14. 14Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
  15. 15Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
  16. 16This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
  17. 17Just know very high concentrations (>40%) can feel tacky in low humidity.
  18. 18Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
  19. 19Glyceryl Stearate is made by reacting glycerin with stearic acid (typically sourced from plant oils like palm or coconut). It's an emulsifier, emollient, and mild occlusive.
  20. 20Emulsifiers help ingredients like oil and water stay mixed so your formula stays nicely blended and uniform in texture.
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side