Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Boots Vitamin C Brightening Eye Gel Versus La Roche-Posay Pure Vitamin C Eye Cream

Boots Vitamin C Brightening Eye Gel Versus La Roche-Posay Pure Vitamin C Eye Cream This brightening eye moisturizer is formulated around 3-O-Ethyl Ascorbic Acid and Ascorbyl Tetraisopalmitate to brighten dull-looking skin and fade the look of dark spots. This

Boots Vitamin C Brightening Eye Gel Versus La Roche-Posay Pure Vitamin C Eye Cream

This brightening eye moisturizer is formulated around 3-O-Ethyl Ascorbic Acid and Ascorbyl Tetraisopalmitate to brighten dull-looking skin and fade the look of dark spots.

This anti-aging eye moisturizer is formulated around Ascorbic Acid and Madecassoside to soften the look of wrinkles and brighten dull-looking skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Butylene Glycol

Carbomer

Glycerin

PEG-40 Hydrogenated Castor Oil

Phenoxyethanol

Potassium Hydroxide

Sodium Citrate

Caprylyl Glycol

3-O-Ethyl Ascorbic Acid

Ascorbyl Tetraisopalmitate

Tocopheryl Acetate

Citrus Junos Fruit Extract

Water, Butylene Glycol, Carbomer, Glycerin, PEG-40 Hydrogenated Castor Oil, Phenoxyethanol, Potassium Hydroxide, Sodium Citrate, Caprylyl Glycol, 3-O-Ethyl Ascorbic Acid, Ascorbyl Tetraisopalmitate, Tocopheryl Acetate, Citrus Junos Fruit Extract

Dimethicone

Butyrospermum Parkii Butter

Limnanthes Alba Seed Oil

Ascorbic Acid

Mannose

Paraffinum Liquidum

Ammonium Polyacryloyldimethyl Taurate

Cetyl Alcohol

PEG-100 Stearate

Glyceryl Stearate

Polymethylsilsesquioxane

Paraffin

Sodium Styrene/Ma Copolymer

Microcrystalline Wax

Madecassoside

Dimethicone/Vinyl Dimethicone Crosspolymer

Dimethiconol

Disodium EDTA

Hydrolyzed Hyaluronic Acid

Acetyl Dipeptide-1 Cetyl Ester

Xanthan Gum

Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate

Water, Glycerin, Dimethicone, Butyrospermum Parkii Butter, Limnanthes Alba Seed Oil, Ascorbic Acid, Mannose, Butylene Glycol, Paraffinum Liquidum, Ammonium Polyacryloyldimethyl Taurate, Cetyl Alcohol, PEG-100 Stearate, Glyceryl Stearate, Polymethylsilsesquioxane, Potassium Hydroxide, Paraffin, Sodium Styrene/Ma Copolymer, Microcrystalline Wax, Madecassoside, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol, Disodium EDTA, Hydrolyzed Hyaluronic Acid, Caprylyl Glycol, Acetyl Dipeptide-1 Cetyl Ester, Xanthan Gum, Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate, Phenoxyethanol

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Potassium Hydroxide (also known as potash) is a strong alkaline ingredient that does one job: it nudges a product's pH up so the whole formula lands in a skin-friendly range.

It's also the base that turns oils into liquid soap during the soap making process.

An expert safety panel reviewed it and found it safe when formulations are made to be non-irritating.

As a pH adjuster, it's typically used well under 1% though regulatory caps go much higher: 5% in nail cuticle removers and 2-4.5% in hair straighteners.

Though there is some concern for irritation from raw or high pH material, a well-balanced formula will be a non-issue for the vast majority of people.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Behentrimonium Methosulfate is a gentle, positively-charged conditioning agent made from rapeseed oil.
  4. 04It's the opposite of a harsh cleansing sulfate despite having "sulfate" in its name; its a detangler/softener in haircare and helps keep oil/water blended into a creamy texture as an emulsifier.
  5. 05Concentration-wise, safety review reports the wider trimonium family shows up between 0.0005% to 10% in rinse-off products and 0.001% to 4% in leave-on products.
  6. 06This ingredient is commonly used at ~1–5% when acting as the emulsifier.
  7. 07Allergies to this ingredient are rare; the CIR panel noted the literature lacks clinical reports of irritation or sensitization and patch tests on finished products containing it came back clean.
  8. 08Benzoic Acid is an organic acid that shows up in cosmetics as a preservative. It helps keep a product from spoiling by holding back the growth of yeast, mold, and some bacteria.
  9. 09This ingredient also functions as a fragrance ingredient that helps mask the unpleasant scent of other ingredients.
  10. 10The way it works is worth understanding; benzoic acid works when the formula is acidic. It is able to sneak into a microbe's cell and mess up how it functions to stop it from growing in an acidic product.
  11. 11However, the acid switches to an inactive form and stops working if a product isn't acidic enough (above ~5 pH). This is why you'll often see it in low pH products or teamed up with other preservatives to cover the gap.
  12. 12Safety wise, it's one of the better studied preservatives out there.
  13. 13The Cosmetic Ingredient Review Expert Panel has concluded this ingredient to be safe for use in cosmetic formulations at concentrations up to 5%.
  14. 14A large international review found this ingredient had no effects on the human body and had low irritation potential.
  15. 15Just so you know, real world use is usually much lower than the 5% ceiling (usually 1% of less).
  16. 16The EU caps it at 2.5% in rinse-off products, 1.7% in oral care, and 0.5% in leave-on products.
  17. 17One thing worth mentioning (it's nothing to worry about): some people get a little stinging or flushing where they apply it. This isn't a true allergy; it's a temporary and harmless reaction. This is the same kind of mild tingle you might notice fro…
  18. 18Caffeine is a naturally occurring plant compound found in coffee beans, tea leaves, cocoa pods, and guarana.
  19. 19As an antioxidant, caffeine protects your skin from free radical damage caused by UV exposure and envionrmnetal stressors.
  20. 20Early research also shows that caffeine can help calm redness, soothe irritated skin, and support hair growth by stimulating microcirculation in the scalp.
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side