Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

EltaMD, Inc UV Clear Tinted SPF 46 Versus Paula's Choice Extra Care Non-Greasy Sunscreen SPF 50

EltaMD, Inc UV Clear Tinted SPF 46 Versus Paula's Choice Extra Care Non-Greasy Sunscreen SPF 50 This hybrid sunscreen covers the full UV range and blocks ~98% of UVB at SPF 46. This hybrid sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50. Wh

EltaMD, Inc UV Clear Tinted SPF 46 Versus Paula's Choice Extra Care Non-Greasy Sunscreen SPF 50

This hybrid sunscreen covers the full UV range and blocks ~98% of UVB at SPF 46.

This hybrid sunscreen covers the full UV range and blocks ~98% of UVB at SPF 50.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Zinc Oxide 9%

Ethylhexyl Methoxycinnamate 7.5%

Water

Cyclopentasiloxane

Niacinamide

Octyldodecyl Neopentanoate

Butylene Glycol

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Polyisobutene

PEG-7 Trimethylolpropane Coconut Ether

Sodium Hyaluronate

Tocopheryl Acetate

Lactic Acid

Oleth-3 Phosphate

Phenoxyethanol

Iodopropynyl Butylcarbamate

Isopropyl Palmitate

Ethylhexyl Stearate

Iron Oxides

Triethoxycaprylylsilane

Zinc Oxide 9%, Ethylhexyl Methoxycinnamate 7.5%, Water, Cyclopentasiloxane, Niacinamide, Octyldodecyl Neopentanoate, Butylene Glycol, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Polyisobutene, PEG-7 Trimethylolpropane Coconut Ether, Sodium Hyaluronate, Tocopheryl Acetate, Lactic Acid, Oleth-3 Phosphate, Phenoxyethanol, Iodopropynyl Butylcarbamate, Isopropyl Palmitate, Ethylhexyl Stearate, Iron Oxides, Triethoxycaprylylsilane

Homosalate 10%

Benzophenone-3 6%

Ethylhexyl Salicylate 5%

Butyl Methoxydibenzoylmethane 3%

Octocrylene 2%

PEG-8

Polyethylene

Silica

Dimethicone

Picrasma Excelsa Wood Extract

Sodium Ascorbyl Phosphate

Retinyl Palmitate

Tocopherol

Titanium Dioxide

Aloe Barbadensis Leaf Juice

Bentonite

Methyl Glucose Sesquistearate

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Sodium Polyacrylate

Kaolin

Ethylhexylglycerin

Disodium EDTA

Sodium Hydroxide

Chlorphenesin

Homosalate 10%, Benzophenone-3 6%, Ethylhexyl Salicylate 5%, Butyl Methoxydibenzoylmethane 3%, Octocrylene 2%, Water, Butylene Glycol, PEG-8, Polyethylene, Silica, Dimethicone, Picrasma Excelsa Wood Extract, Sodium Ascorbyl Phosphate, Retinyl Palmitate, Tocopherol, Tocopheryl Acetate, Titanium Dioxide, Aloe Barbadensis Leaf Juice, Bentonite, Methyl Glucose Sesquistearate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Sodium Polyacrylate, Kaolin, Ethylhexylglycerin, Disodium EDTA, Sodium Hydroxide, Phenoxyethanol, Chlorphenesin

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Tocopheryl Acetate is a stable, shelf-friendly form of vitamin E.

Formulators love it because plain vitamin E oxidizes quickly once it hits air. This acetate version stays stable and resists going off, helping to extend a product's shelf life.

It's actually inactive on its own and works like a slow-release "storage" form; the enzymes in your skin called esterases gradually convert it into active vitamin E over time.

One in vivo study showed 5% of the acetate in the living layer of the epidermis converted to vitamin E after 5 days of application. This study also found the skin gained protection against UV damage even though the conversion was slow and small.

Once converted, vitamin E acts as a skin's main fat-soluble antioxidant that fights free radicals to protect skin from damage.

Topical vitamin E generally boosts the skin's photoprotection, and it reduced UV-damage in animal models.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

Overall, it has a pretty solid safety profile and has been found to be non-irritating and non-comedogenic. Allergic reactions may happen but stay rare due to how widely the ingredient gets used.

The concentration will vary depending on the formula; industry data shows 0.1% in baby lotions, 3% in lipsticks, and 5% in foot powders. You can also find this ingredient at 100% in a pure vitamin E oil.

Most leave-on skincare keeps it at the lower end, often between 0.5-1%.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.
  4. 04Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.
  5. 05It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.
  6. 06Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.
  7. 07A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.
  8. 08Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  9. 09Topically, glycerin does several things at once:
  10. 10Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
  11. 11Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
  12. 12This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
  13. 13Just know very high concentrations (>40%) can feel tacky in low humidity.
  14. 14Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
  15. 15Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate (long name, huh?) is a synthetic antioxidant.
  16. 16It is used to help stabilize other antioxidants or prevent the color from changing in a product.
  17. 17As an antioxidant, it helps fight free-radical molecules. Free-radical molecules are capable of damaging our cells and other genetic material. Thus, antioxidants may reduce the signs of aging.
  18. 18This ingredient is oil-soluble.
  19. 19Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
  20. 20It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
Source · skinsort.com
02

Product index

Related product references

Product

Paula's Choice Calm Redness Moisturizer

Paula's Choice Calm Redness Moisturizer Paula's Choice Calm Redness Moisturizer ingredients explained: Sodium Hyaluronate⁠, Hydrolyzed Wheat Protein⁠, Petrolatum⁠, Glycerin⁠, Hydrogenated L…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side