Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Estée Lauder Advanced Night Repair Synchronized Multi-Recovery Complex Serum Versus Medik8 Liquid Peptides

Estée Lauder Advanced Night Repair Synchronized Multi-Recovery Complex Serum Versus Medik8 Liquid Peptides This barrier-repair serum is formulated around Bifida Ferment Lysate and Sodium Hyaluronate to strengthen the skin barrier and soften the look of wrinkle

Estée Lauder Advanced Night Repair Synchronized Multi-Recovery Complex Serum Versus Medik8 Liquid Peptides

This barrier-repair serum is formulated around Bifida Ferment Lysate and Sodium Hyaluronate to strengthen the skin barrier and soften the look of wrinkles.

This anti-aging serum is formulated around Carnosine and Palmitoyl Tripeptide-5 to soften the look of wrinkles and refine skin texture.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Bifida Ferment Lysate

PEG-8

Propanediol

Bis-PEG-18 Methyl Ether Dimethyl Silane

Methyl Gluceth-20

Glycereth-26

PEG-75

Butylene Glycol

Adansonia Digitata Seed Extract

Tripeptide-32

Sodium Hyaluronate

Faex Extract

Lactobacillus Ferment

Cola Acuminata Seed Extract

Anthemis Nobilis Flower Extract

Hydrolyzed Algin

Pantethine

Caffeine

Lecithin

Sodium Rna

Bisabolol

Squalane

Glycerin

Oleth-3 Phosphate

Caprylyl Glycol

Oleth-3

Oleth-5

Choleth-24

Hydrogenated Lecithin

Jojoba Wax PEG-120 Esters

Ceteth-24

Tocopheryl Acetate

Carbomer

Triethanolamine

Tetrasodium EDTA

BHT

Xanthan Gum

Potassium Sorbate

Disodium EDTA

Phenoxyethanol

CI 14700

CI 19140

Water, Bifida Ferment Lysate, PEG-8, Propanediol, Bis-PEG-18 Methyl Ether Dimethyl Silane, Methyl Gluceth-20, Glycereth-26, PEG-75, Butylene Glycol, Adansonia Digitata Seed Extract, Tripeptide-32, Sodium Hyaluronate, Faex Extract, Lactobacillus Ferment, Cola Acuminata Seed Extract, Anthemis Nobilis Flower Extract, Hydrolyzed Algin, Pantethine, Caffeine, Lecithin, Sodium Rna, Bisabolol, Squalane, Glycerin, Oleth-3 Phosphate, Caprylyl Glycol, Oleth-3, Oleth-5, Choleth-24, Hydrogenated Lecithin, Jojoba Wax PEG-120 Esters, Ceteth-24, Tocopheryl Acetate, Carbomer, Triethanolamine, Tetrasodium EDTA, BHT, Xanthan Gum, Potassium Sorbate, Disodium EDTA, Phenoxyethanol, CI 14700, CI 19140

Inulin

Panthenol

Alpha-Glucan Oligosaccharide

Carnosine

Polysorbate 20

Hydroxypropyl Cyclodextrin

Dunaliella Salina Extract

Ethylhexylglycerin

Citric Acid

Palmitoyl Tripeptide-5

Sodium Benzoate

Acetyl Hexapeptide-8

Tetrapeptide-21

Pentapeptide-18

Palmitoyl Tripeptide-1

Pantolactone

Palmitoyl Tripeptide-38

Palmitoyl Tetrapeptide-7

Glyceryl Caprylate

Lactic Acid/Glycolic Acid Copolymer

Polyvinyl Alcohol

Phenylpropanol

Copper Palmitoyl Heptapeptide-14

Heptapeptide-15 Palmitate

Water, Glycerin, Butylene Glycol, Inulin, Sodium Hyaluronate, Panthenol, Alpha-Glucan Oligosaccharide, Carnosine, Carbomer, Polysorbate 20, Caprylyl Glycol, Phenoxyethanol, Hydroxypropyl Cyclodextrin, Dunaliella Salina Extract, Ethylhexylglycerin, Citric Acid, Palmitoyl Tripeptide-5, Sodium Benzoate, Acetyl Hexapeptide-8, Tetrapeptide-21, Pentapeptide-18, Palmitoyl Tripeptide-1, Pantolactone, Palmitoyl Tripeptide-38, Palmitoyl Tetrapeptide-7, Glyceryl Caprylate, Lactic Acid/Glycolic Acid Copolymer, Polyvinyl Alcohol, Phenylpropanol, Copper Palmitoyl Heptapeptide-14, Heptapeptide-15 Palmitate, Potassium Sorbate, Xanthan Gum

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.

Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.

It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.

Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.

A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Potassium Sorbate is a preservative used to prevent yeast and mold in products. It is commonly found in both cosmetic and food products.

This ingredient comes from potassium salt derived from sorbic acid. Sorbic acid is a natural antibiotic and effective against fungus.

Both potassium sorbate and sorbic acid can be found in baked goods, cheeses, dried meats, dried fruit, ice cream, pickles, wine, yogurt, and more.

You'll often find this ingredient used with other preservatives.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Aloe Barbadensis Leaf Juice
  2. 02Caprylic/Capric Triglyceride
  3. 03Water
  4. 04Niacinamide
  5. 05Saccharomyces/Rice Ferment Filtrate
  6. 06Pentylene Glycol
  7. 07Cetearyl Olivate
  8. 08Hydrogenated Starch Hydrolysate
  9. 09Jojoba Oil/Macadamia Seed Oil Esters
  10. 10Butylene Glycol
  11. 11Cetearyl Glucoside
  12. 12Sorbitan Olivate
  13. 13Brassica Oleracea Italica Seed Oil
  14. 14Resveratrol
  15. 15Panthenol
  16. 16Hydroxyacetophenone
  17. 17Cetyl Alcohol
  18. 18Caprylyl Glycol
  19. 191,2-Hexanediol
  20. 20Astaxanthin
Source · skinsort.com
02

Product index

Related product references

Product

Medik8 Liquid Peptides (2021)

Medik8 Liquid Peptides (2021) Medik8 Liquid Peptides (2021) ingredients explained: Aqua (Water), Glycerin, Butylene Glycol, Inulin, Sodium Hyaluronate, Panthenol, Alpha-Glucan Oligosacchari…

Source: incidecoder.comView reference →

Product

Medik8 Liquid Peptides

Medik8 Liquid Peptides Ingredients in Medik8 Liquid Peptides explained: benefits, concerns, and detailed analysis of 33 ingredients including Water, Glycerin, and Butylene Glycol A highly r…

Source: skinsort.comView reference →

Product

Medik8 Liquid Peptides

Medik8 Liquid Peptides Medik8 Liquid Peptides ingredients explained: Aqua (Water), Glycerin, Butylene Glycol, Palmitoyl Tetrapeptide-7, Palmitoyl Tripeptide-1, Copper Heptapeptide-14 Pantot…

Source: incidecoder.comView reference →
03

Comparison edit

Read side by side