Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Glow Recipe Plum Plump Hyaluronic Acid Serum Versus First Aid Beauty Ultra Repair Face Moisturizer

Glow Recipe Plum Plump Hyaluronic Acid Serum Versus First Aid Beauty Ultra Repair Face Moisturizer This hydrating serum is formulated around Sodium Acetylated Hyaluronate and Sodium Hyaluronate to hydrate skin and strengthen the skin barrier. This barrier-repa

Glow Recipe Plum Plump Hyaluronic Acid Serum Versus First Aid Beauty Ultra Repair Face Moisturizer

This hydrating serum is formulated around Sodium Acetylated Hyaluronate and Sodium Hyaluronate to hydrate skin and strengthen the skin barrier.

This barrier-repair moisturizer is formulated around Avena Sativa Kernel Flour and Squalane to strengthen the skin barrier and calm redness.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Glycerin

Propanediol

Pentylene Glycol

Pleiogynium Timoriense Fruit Extract

Podocarpus Elatus Fruit Extract

Terminalia Ferdinandiana Fruit Extract

Sodium Acetylated Hyaluronate

Sodium Hyaluronate

Tremella Fuciformis Polysaccharide

Acacia Seyal Gum Extract

Sr-Spider Polypeptide-1

Pantothenic Acid

Phospholipids

Sodium Hydroxide

Spirulina Platensis Extract

Raphanus Sativus Root Extract

Caprylyl Glycol

Chlorphenesin

Tetrasodium Glutamate Diacetate

Polyglyceryl-6 Caprylate

Polyglyceryl-4 Caprate

Potassium Sorbate

Propylene Glycol

Leuconostoc/Radish Root Ferment Filtrate

1,2-Hexanediol

Citric Acid

Ethylhexylglycerin

Hydroxyacetophenone

Carrageenan

Xanthan Gum

Sodium Glycolate

Sodium Formate

Phenoxyethanol

Parfum

Water, Glycerin, Propanediol, Pentylene Glycol, Pleiogynium Timoriense Fruit Extract, Podocarpus Elatus Fruit Extract, Terminalia Ferdinandiana Fruit Extract, Sodium Acetylated Hyaluronate, Sodium Hyaluronate, Tremella Fuciformis Polysaccharide, Acacia Seyal Gum Extract, Sr-Spider Polypeptide-1, Pantothenic Acid, Phospholipids, Sodium Hydroxide, Spirulina Platensis Extract, Raphanus Sativus Root Extract, Caprylyl Glycol, Chlorphenesin, Tetrasodium Glutamate Diacetate, Polyglyceryl-6 Caprylate, Polyglyceryl-4 Caprate, Potassium Sorbate, Propylene Glycol, Leuconostoc/Radish Root Ferment Filtrate, 1,2-Hexanediol, Citric Acid, Ethylhexylglycerin, Hydroxyacetophenone, Carrageenan, Xanthan Gum, Sodium Glycolate, Sodium Formate, Phenoxyethanol, Parfum

Glyceryl Stearate Se

Caprylic/Capric Triglyceride

Dimethicone

Urea

Cetyl Alcohol

Avena Sativa Kernel Flour

Squalane

Butyrospermum Parkii Butter

Allantoin

Persea Gratissima Oil

N-Butyl Alcohol

Carbomer

Chrysanthemum Parthenium Extract

Camellia Sinensis Leaf Extract

Glycyrrhiza Glabra Root Extract

Ceramide NP

Tetrasodium EDTA

Water, Glyceryl Stearate Se, Glycerin, Caprylic/Capric Triglyceride, Dimethicone, Urea, Cetyl Alcohol, Avena Sativa Kernel Flour, Squalane, Caprylyl Glycol, Butyrospermum Parkii Butter, Allantoin, Persea Gratissima Oil, N-Butyl Alcohol, Carbomer, Chrysanthemum Parthenium Extract, Camellia Sinensis Leaf Extract, Glycyrrhiza Glabra Root Extract, Sodium Hydroxide, Ceramide NP, Leuconostoc/Radish Root Ferment Filtrate, Phenoxyethanol, Tetrasodium EDTA

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Leuconostoc/Radish Root Ferment Filtrate is a natural preservative. It comes from fermenting radish roots with a bacteria called leuconostoc. The trade name for this ingredient is Leucidal.

Leuconostoc comes from lactic acid.

This ingredient has antimicrobial properties and helps prevent the growth of bacteria in a product.

Leuconostoc is used to make the traditional Korean side-dish, kimchi. It is also used to make sourdough bread (both incredibly yummy foods).

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Sodium Hydroxide is also known as lye or caustic soda. It is used to adjust the pH of products; many ingredients require a specific pH to be effective.

In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.

Your skin has a natural pH and acid mantle. This acid mantle helps prevent harmful bacteria from breaking through. The acid mantle also helps keep your skin hydrated.

"Alkaline" refers to a high pH level. A low pH level would be considered acidic.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.
  4. 04Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.
  5. 05Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).
  6. 06Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  7. 07Topically, glycerin does several things at once:
  8. 08Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
  9. 09Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
  10. 10This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
  11. 11Just know very high concentrations (>40%) can feel tacky in low humidity.
  12. 12Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
  13. 13Hexylene Glycol is a multitasker ingredient that works as a solvent, humectant, emulsifier, viscosity reducer, and preservative booster.
  14. 14It is able to dissolve both water and oil-soluble ingredients to stabilize tricky actives and make products spread more easily.
  15. 15As a humectant, it pulls water into the skin. But it's a pretty minor moisturizing ingredient compared to other humectants, like glycerin.
  16. 16Interestingly, it can act as a mild penetration enhancer. One in vitro study on human skin found a 12% concentration upped the absorption of mometasone furoate (a medicinal ingredient used to treat inflammatory skin conditions) up to 7%.
  17. 17This ingredient is typically used at levels of 0.1-10% depending on the role it's playing.
  18. 18A patch test study on eczema patients didn't find a significant increase in irritation versus the control group, but the potential for irritation rises at higher concentrations.
  19. 19Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
  20. 20It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side

04

Ask the journal

Related questions

01How to Apply Face Serums

Skincare rules can get confusing, but when it comes to application the general rule of thumb is to pay attention to the product’s consistency. “Apply the lightest, thinnest product first and the heaviest, and more dense products last, since thinner products can’t penetrate thicker products,”says Dr. Lewis. After cleansing the face and following up with a toner, let the skin dry before using a serum. You can layer different serums on top of each other or opt for a product that has a precise mix of multiple hero ingredients, such as hyaluronic acid and vitamin C.

Source · www.skincare.com
02When and How to Use Hyaluronic Acid in Your Routine

Products with hyaluronic acid can be used in the morning or at night (or both!). Applying the hydrating ingredient at night will restore your skin’s resilience while you sleep, and applying it in the morning will leave your skin feeling plump, hydrated and ready for makeup. Hyaluronic acid is great at providing topical hydration when it’s introduced into a balanced skincare routine. According to Dr. King, it’s important to pair your hyaluronic acid products with an emollient or occlusive moisturizer to lock in hydration.

Source · www.skincare.com