Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Kiehl's Clearly Corrective Dark Spot Solution Versus Paula's Choice 25% Vitamin C + Glutathione Clinical Serum

Kiehl's Clearly Corrective Dark Spot Solution Versus Paula's Choice 25% Vitamin C + Glutathione Clinical Serum This brightening treatment is formulated around 3-O-Ethyl Ascorbic Acid and Salicylic Acid to fade the look of dark spots and brighten dull-looking s

Kiehl's Clearly Corrective Dark Spot Solution Versus Paula's Choice 25% Vitamin C + Glutathione Clinical Serum

This brightening treatment is formulated around 3-O-Ethyl Ascorbic Acid and Salicylic Acid to fade the look of dark spots and brighten dull-looking skin.

This brightening serum is formulated around Tetrahexyldecyl Ascorbate and Ascorbyl Glucoside to brighten dull-looking skin and fade the look of dark spots.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Propylene Glycol

Glycerin

Alcohol Denat.

PEG/PPG/Polybutylene Glycol-8/5/3 Glycerin

Hydroxypropyl Tetrahydropyrantriol

3-O-Ethyl Ascorbic Acid

PPG-6-Decyltetradeceth-30

Phenoxyethanol

Salicylic Acid

Xanthan Gum

Hydroxyethylcellulose

Potassium Hydroxide

Citric Acid

Sodium Citrate

Tocopheryl Acetate

Lavandula Angustifolia Oil

Disodium EDTA

Adenosine

Linalool

Butylene Glycol

Tocopherol

Citrus Aurantium Tachibana Peel Extract

Paeonia Suffruticosa Root Extract

Water, Propylene Glycol, Glycerin, Alcohol Denat., PEG/PPG/Polybutylene Glycol-8/5/3 Glycerin, Hydroxypropyl Tetrahydropyrantriol, 3-O-Ethyl Ascorbic Acid, PPG-6-Decyltetradeceth-30, Phenoxyethanol, Salicylic Acid, Xanthan Gum, Hydroxyethylcellulose, Potassium Hydroxide, Citric Acid, Sodium Citrate, Tocopheryl Acetate, Lavandula Angustifolia Oil, Disodium EDTA, Adenosine, Linalool, Butylene Glycol, Tocopherol, Citrus Aurantium Tachibana Peel Extract, Paeonia Suffruticosa Root Extract

Tetrahexyldecyl Ascorbate

Dimethicone

C9-12 Alkane

Ascorbyl Glucoside

Silica

Pyrus Malus Fruit Extract

Hydrogenated Lecithin

Polyglyceryl-6 Polyricinoleate

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Oryza Sativa Bran Extract

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Cetyl Alcohol

Caprylyl Glycol

Lysine Carboxymethyl Cysteinate

Coco-Caprylate/Caprate

Glutathione

Sodium Phytate

Hexylene Glycol

Ethylhexylglycerin

Helianthus Annuus Seed Extract

Urea

Mannitol

Caprylic/Capric Triglyceride

Sodium PCA

Rosmarinus Officinalis Leaf Extract

Polysorbate 60

Sorbitan Isostearate

Trehalose

Ascorbic Acid

Glucose

Vanilla Planifolia Fruit Extract

Polyquaternium-51

Ergothioneine

Triacetin

Sodium Hyaluronate

Water, Tetrahexyldecyl Ascorbate, Dimethicone, Glycerin, C9-12 Alkane, Ascorbyl Glucoside, Silica, Pyrus Malus Fruit Extract, Hydrogenated Lecithin, Polyglyceryl-6 Polyricinoleate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Xanthan Gum, Oryza Sativa Bran Extract, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Cetyl Alcohol, Caprylyl Glycol, Lysine Carboxymethyl Cysteinate, Coco-Caprylate/Caprate, Tocopherol, Glutathione, Sodium Citrate, Sodium Phytate, Hexylene Glycol, Ethylhexylglycerin, Helianthus Annuus Seed Extract, Urea, Mannitol, Caprylic/Capric Triglyceride, Sodium PCA, Rosmarinus Officinalis Leaf Extract, Polysorbate 60, Sorbitan Isostearate, Trehalose, Ascorbic Acid, Glucose, Vanilla Planifolia Fruit Extract, Polyquaternium-51, Ergothioneine, Triacetin, Sodium Hyaluronate, Phenoxyethanol

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Sodium Citrate is the sodium salts of citric acid. In skincare, it is used to alter pH levels and acts as a preservative.

Its main functions are to maintain the pH of a product and neutralize metal ions.

The acidity of our skin is maintained by our glands and skin biome; normal pH level of skin is slightly acidic (~4.75-5.5).

Being slightly acidic allows our skin to create an "acid mantle". This acid mantle is a thin barrier that protects our skin from bacteria and contaminants.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Water
  2. 02Cyclopentasiloxane
  3. 03Octyldodecyl Neopentanoate
  4. 04Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer
  5. 05Glycerin
  6. 06Sodium Ascorbyl Phosphate
  7. 07Cetyl Alcohol
  8. 08Niacinamide
  9. 09Dimethicone
  10. 10Cetearyl Alcohol
  11. 11Butylene Glycol
  12. 12Glyceryl Stearate
  13. 13PEG-100 Stearate
  14. 14Adenosine
  15. 15Epigallocatechin Gallate
  16. 16Glucose Oxidase
  17. 17Lactoperoxidase
  18. 18Boerhavia Diffusa Root Extract
  19. 19Cocos Nucifera Fruit Extract
  20. 20Lactobacillus
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side