Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Naturium Multi-Peptide Rich Cream Versus Naturium Plant Ceramide Rich Moisture Cream

Naturium Multi-Peptide Rich Cream Versus Naturium Plant Ceramide Rich Moisture Cream This anti-aging moisturizer is formulated around Palmitoyl Pentapeptide-4 and Copper Tripeptide-1 to soften the look of wrinkles and strengthen the skin barrier. This barrier-

Naturium Multi-Peptide Rich Cream Versus Naturium Plant Ceramide Rich Moisture Cream

This anti-aging moisturizer is formulated around Palmitoyl Pentapeptide-4 and Copper Tripeptide-1 to soften the look of wrinkles and strengthen the skin barrier.

This barrier-repair moisturizer is formulated around Phospholipids and Sphingolipids to strengthen the skin barrier and hydrate skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Caprylic/Capric Triglyceride

Glycerin

Octyldodecanol

Butylene Glycol

Polyglyceryl-3 Polyricinoleate

Cera Microcristallina

Magnesium Stearate

Polyglyceryl-3 Oleate

Undecane

1,2-Hexanediol

Polyglyceryl-20 Octadecabehenate/Laurate

Sorbitan Olivate

Stearalkonium Bentonite

Magnesium Sulfate

Linum Usitatissimum Seed Extract

Sodium Hyaluronate

Mannitol

Phosphatidylcholine

Palmitoyl Pentapeptide-4

Copper Tripeptide-1

Ferulic Acid

Gold

Tocopherol

Tridecane

Asiaticoside

Propylene Carbonate

Glyceryl Caprylate

Cetyl Alcohol

Decyl Glucoside

P-Anisic Acid

Xanthan Gum

Tocopheryl Acetate

Sodium Chloride

Sodium Benzoate

Potassium Sorbate

Phenoxyethanol

Water, Caprylic/Capric Triglyceride, Glycerin, Octyldodecanol, Butylene Glycol, Polyglyceryl-3 Polyricinoleate, Cera Microcristallina, Magnesium Stearate, Polyglyceryl-3 Oleate, Undecane, 1,2-Hexanediol, Polyglyceryl-20 Octadecabehenate/Laurate, Sorbitan Olivate, Stearalkonium Bentonite, Magnesium Sulfate, Linum Usitatissimum Seed Extract, Sodium Hyaluronate, Mannitol, Phosphatidylcholine, Palmitoyl Pentapeptide-4, Copper Tripeptide-1, Ferulic Acid, Gold, Tocopherol, Tridecane, Asiaticoside, Propylene Carbonate, Glyceryl Caprylate, Cetyl Alcohol, Decyl Glucoside, P-Anisic Acid, Xanthan Gum, Tocopheryl Acetate, Sodium Chloride, Sodium Benzoate, Potassium Sorbate, Phenoxyethanol

Oleic/Linoleic/Linolenic Polyglycerides

Ethylhexyl Olivate

Behenyl Alcohol

C12-16 Alcohols

Butyrospermum Parkii Butter

Hydrogenated Olive Oil Decyl Esters

Isostearyl Alcohol

C13-15 Alkane

Butylene Glycol Cocoate

Hydrogenated Lecithin

Palmitic Acid

Phospholipids

Sphingolipids

Crambe Abyssinica Seed Oil

Squalane

Linoleic Acid

Linolenic Acid

Microcrystalline Cellulose

Citric Acid

Oryza Sativa Bran Extract

Caprylyl Glycol

Ethylcellulose

Helianthus Annuus Extract

Caprylhydroxamic Acid

Sodium Phytate

Rosmarinus Officinalis Leaf Extract

Sodium Citrate

Water, Glycerin, Oleic/Linoleic/Linolenic Polyglycerides, Ethylhexyl Olivate, Behenyl Alcohol, C12-16 Alcohols, Butyrospermum Parkii Butter, Caprylic/Capric Triglyceride, Hydrogenated Olive Oil Decyl Esters, Isostearyl Alcohol, C13-15 Alkane, Butylene Glycol Cocoate, Hydrogenated Lecithin, Palmitic Acid, Phospholipids, Sphingolipids, Crambe Abyssinica Seed Oil, Squalane, Linoleic Acid, Linolenic Acid, Microcrystalline Cellulose, Citric Acid, Oryza Sativa Bran Extract, Caprylyl Glycol, Ethylcellulose, Helianthus Annuus Extract, Sodium Hyaluronate, Tocopherol, Caprylhydroxamic Acid, Xanthan Gum, Phenoxyethanol, Sodium Phytate, Potassium Sorbate, Rosmarinus Officinalis Leaf Extract, Sodium Citrate

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.

Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.

In practice, that translates to a long shelf life and a consistently elegant skin feel.

While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.

Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.

This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.

This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures at concentrations as low as 0.2%.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Potassium Sorbate is a preservative used to prevent yeast and mold in products. It is commonly found in both cosmetic and food products.

This ingredient comes from potassium salt derived from sorbic acid. Sorbic acid is a natural antibiotic and effective against fungus.

Both potassium sorbate and sorbic acid can be found in baked goods, cheeses, dried meats, dried fruit, ice cream, pickles, wine, yogurt, and more.

You'll often find this ingredient used with other preservatives.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

02

Product index

Related product references

Product

naturium Multi-peptide Rich Cream

naturium Multi-peptide Rich Cream naturium Multi-peptide Rich Cream ingredients explained: Aqua/Water/Eau, Caprylic/Capric Triglyceride, Glycerin, Octyldodecanol, Butylene Glycol, Polyglyce…

Source: incidecoder.comView reference →

Product

Naturium Multi-Peptide Rich Cream

Naturium Multi-Peptide Rich Cream Ingredients in Naturium Multi-Peptide Rich Cream explained: benefits, concerns, and detailed analysis of 37 ingredients including Water, Caprylic/Capric Tr…

Source: skinsort.comView reference →
03

Comparison edit

Read side by side