Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

Paula's Choice Calm Redness Relief Cleanser Versus Paula's Choice Calm Redness Relief Moisturizer for Normal to Oily Skin

Paula's Choice Calm Redness Relief Cleanser Versus Paula's Choice Calm Redness Relief Moisturizer for Normal to Oily Skin This mild gel cleanser is made to cleanse while calming and soothing your skin. This calming moisturizer is formulated around Glycyrrhiza

Paula's Choice Calm Redness Relief Cleanser Versus Paula's Choice Calm Redness Relief Moisturizer for Normal to Oily Skin

This mild gel cleanser is made to cleanse while calming and soothing your skin.

This calming moisturizer is formulated around Glycyrrhiza Glabra Root Extract and Allantoin to calm redness and strengthen the skin barrier.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Disodium Cocoamphodiacetate

Butylene Glycol

Coco-Glucoside

Glycerin

Xanthan Gum

Limnanthes Alba Seed Oil

PEG-7 Glyceryl Cocoate

Arctium Majus Root Water

Allantoin

Aloe Barbadensis Leaf Juice Powder

PEG-120 Methyl Glucose Dioleate

Tocopheryl Acetate

Tocopherol

Calendula Officinalis Flower Extract

Isoamyl Laurate

Polysorbate 20

Polyglyceryl-10 Laurate

Ethylhexylglycerin

Tetrasodium EDTA

Citric Acid

Phenoxyethanol

Potassium Sorbate

Sodium Benzoate

Water, Disodium Cocoamphodiacetate, Butylene Glycol, Coco-Glucoside, Glycerin, Xanthan Gum, Limnanthes Alba Seed Oil, PEG-7 Glyceryl Cocoate, Arctium Majus Root Water, Allantoin, Aloe Barbadensis Leaf Juice Powder, PEG-120 Methyl Glucose Dioleate, Tocopheryl Acetate, Tocopherol, Calendula Officinalis Flower Extract, Isoamyl Laurate, Polysorbate 20, Polyglyceryl-10 Laurate, Ethylhexylglycerin, Tetrasodium EDTA, Citric Acid, Phenoxyethanol, Potassium Sorbate, Sodium Benzoate

Cyclopentasiloxane

Bis-Phenylpropyl Dimethicone

Glycyrrhiza Glabra Root Extract

Beta-Glucan

Dipotassium Glycyrrhizate

Epilobium Angustifolium Flower/Leaf/Stem Extract

Phenyl Trimethicone

Dimethicone

Dimethicone/Vinyl Dimethicone Crosspolymer

Sodium Hyaluronate

Arctium Majus Root Extract

Camellia Sinensis Leaf Extract

Laminaria Saccharina Extract

Vitis Vinifera Seed Extract

Panthenol

Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Hydroxyethylcellulose

Isohexadecane

Sodium Carbomer

Polysorbate 80

Water, Cyclopentasiloxane, Glycerin, Butylene Glycol, Bis-Phenylpropyl Dimethicone, Glycyrrhiza Glabra Root Extract, Allantoin, Beta-Glucan, Dipotassium Glycyrrhizate, Epilobium Angustifolium Flower/Leaf/Stem Extract, Phenyl Trimethicone, Dimethicone, Dimethicone/Vinyl Dimethicone Crosspolymer, Sodium Hyaluronate, Arctium Majus Root Extract, Camellia Sinensis Leaf Extract, Laminaria Saccharina Extract, Vitis Vinifera Seed Extract, Panthenol, Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Hydroxyethylcellulose, Isohexadecane, Sodium Carbomer, Polysorbate 80, Ethylhexylglycerin, Phenoxyethanol

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Allantoin is a soothing ingredient known for its protective and moisturizing properties; it's basically a quiet workhorse ingredient you can find in a huge range of cosmetics.

Though it can be derived from the comfrey plant, allantoin is produced synthetically for cosmetic products to ensure purity.

Research shows it can encourage your skin cells to turn over and renew by stimulating keratinocyte and fibroblast proliferation.

It also has mild keratolytic properties to help loosen and shed dead skin cells without being harsh.

Studies also suggest allantoin can help calm inflammation by dialing down some of the chemical signals your skin sends out when it is irritated.

This ingredient is typically used in the 0.1-0.5% range, and the FDA recognizes it as a skin protectant in OTC products up to 2%.

Overall, allantoin is a wonderful addition to most routines; it is stable across a wide pH range (~4-8), works well with other ingredients, and is considered non-sensitizing/non-irritating.

Fun fact: Allantoin is naturally occurring in comfrey root, beets, chamomile, and wheat sprouts. Our bodies even produce it as a byproduct of uric acid metabolism.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Side-by-side

  1. 01Water
  2. 02Propylene Glycol
  3. 03Benzoyl Peroxide
  4. 04Bisabolol
  5. 05Allantoin
  6. 06Acrylates/C10-30 Alkyl Acrylate Crosspolymer
  7. 07Hydroxyethylcellulose
  8. 08Sodium Citrate
  9. 09Laureth-4
  10. 10Caprylyl Glycol
  11. 11Sodium Hydroxide
  12. 12Disodium EDTA
  13. 13Hexylene Glycol
  14. 14Phenoxyethanol
  15. 15Water, Propylene Glycol, Benzoyl Peroxide, Bisabolol, Allantoin, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Hydroxyethylcellulose, Sodium Citrate, Laureth-4, Caprylyl Glycol, Sodium Hydroxide, Disodium EDTA, Hexylene Glycol, Phenoxyethanol
  16. 16Caprylic/Capric Triglyceride
  17. 17Glyceryl Stearate Se
  18. 18Stearic Acid
  19. 19Cetearyl Alcohol
  20. 20Colloidal Sulfur
Source · skinsort.com
02

Product index

Related product references

03

Comparison edit

Read side by side