Peter Thomas Roth Peptide 21 Wrinkle Resist Moisturizer Versus Allies of Skin Peptide & Antioxidants Firming Daily Treatment

Peter Thomas Roth Peptide 21 Wrinkle Resist Moisturizer Versus Allies of Skin Peptide & Antioxidants Firming Daily Treatment

This anti-aging moisturizer is formulated around Hexapeptide-11 and Dipeptide Diaminobutyroyl Benzylamide Diacetate to soften the look of wrinkles.

This anti-aging moisturizer is formulated around Niacinamide and Tetrahexyldecyl Ascorbate to soften the look of wrinkles and calm redness.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Glycerin

Dimethicone

Olive Oil Decyl Esters

Glycereth-26

Squalane

Butylene Glycol

Behenyl Alcohol

Polysilicone-11

Batyl Alcohol

Simmondsia Chinensis Seed Oil

Hexapeptide-11

Dipeptide Diaminobutyroyl Benzylamide Diacetate

Palmitoyl Tripeptide-5

Tripeptide-10 Citrulline

Acetyl Hexapeptide-1

Acetyl Tetrapeptide-11

Acetyl Hexapeptide-8

Palmitoyl Hexapeptide-12

Acetyl Tetrapeptide-9

Palmitoyl Tetrapeptide-7

Acetyl Tetrapeptide-2

Acetyl Octapeptide-3

Palmitoyl Hexapeptide-19

Trifluoroacetyl Tripeptide-2

Tripeptide-1

Palmitoyl Oligopeptide

Palmitoyl Tripeptide-1

Potassium Hydrolyzed Polygamma-Glutamate

Sodium Polyglutamate

Squalene

Mica

Sodium Hyaluronate

Sorbic Acid

Tocopherol

Cereus Grandiflorus Flower Extract

Pseudoalteromonas Ferment Extract

Leuconostoc/Radish Root Ferment Filtrate

Magnesium Chloride

Phenoxyethanol

Cetyl Alcohol

Stearyl Alcohol

Trehalose

Glyceryl Stearate

Silanetriol Trehalose Ether

Mannitol

Phytosterols

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Caprylic/Capric Triglyceride

Hydrogenated Lecithin

Polyglyceryl-10 Myristate

Polysorbate 20

Dimethyl Isosorbide

Sodium Benzoate

Potassium Sorbate

Caprylyl Glycol

Sodium Hydroxide

Laureth-12

Hydrolyzed Wheat Protein

Lecithin

Disodium Phosphate

Hydrolyzed Soy Protein

Carbomer

Dextran

Ethylhexylglycerin

Sodium Lactate

Tetradecyl Aminobutyroylvalylaminobutyric Urea Trifluoroacetate

Sodium Phosphate

Xanthan Gum

Triethanolamine

Acrylates Copolymer

Water, Glycerin, Dimethicone, Olive Oil Decyl Esters, Glycereth-26, Squalane, Butylene Glycol, Behenyl Alcohol, Polysilicone-11, Batyl Alcohol, Simmondsia Chinensis Seed Oil, Hexapeptide-11, Dipeptide Diaminobutyroyl Benzylamide Diacetate, Palmitoyl Tripeptide-5, Tripeptide-10 Citrulline, Acetyl Hexapeptide-1, Acetyl Tetrapeptide-11, Acetyl Hexapeptide-8, Palmitoyl Hexapeptide-12, Acetyl Tetrapeptide-9, Palmitoyl Tetrapeptide-7, Acetyl Tetrapeptide-2, Acetyl Octapeptide-3, Palmitoyl Hexapeptide-19, Trifluoroacetyl Tripeptide-2, Tripeptide-1, Palmitoyl Oligopeptide, Palmitoyl Tripeptide-1, Potassium Hydrolyzed Polygamma-Glutamate, Sodium Polyglutamate, Squalene, Mica, Sodium Hyaluronate, Sorbic Acid, Tocopherol, Cereus Grandiflorus Flower Extract, Pseudoalteromonas Ferment Extract, Leuconostoc/Radish Root Ferment Filtrate, Magnesium Chloride, Phenoxyethanol, Cetyl Alcohol, Stearyl Alcohol, Trehalose, Glyceryl Stearate, Silanetriol Trehalose Ether, Mannitol, Phytosterols, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Caprylic/Capric Triglyceride, Hydrogenated Lecithin, Polyglyceryl-10 Myristate, Polysorbate 20, Dimethyl Isosorbide, Sodium Benzoate, Potassium Sorbate, Caprylyl Glycol, Sodium Hydroxide, Laureth-12, Hydrolyzed Wheat Protein, Lecithin, Disodium Phosphate, Hydrolyzed Soy Protein, Carbomer, Dextran, Ethylhexylglycerin, Sodium Lactate, Tetradecyl Aminobutyroylvalylaminobutyric Urea Trifluoroacetate, Sodium Phosphate, Xanthan Gum, Triethanolamine, Acrylates Copolymer

Isononyl Isononanoate

Caffeine

C12-15 Alkyl Benzoate

Niacinamide

Lactobacillus Ferment

Cetearyl Olivate

Polysorbate 60

Tetrahexyldecyl Ascorbate

Marrubium Vulgare Extract

Plantago Lanceolata Leaf Extract

Acetyl Tetrapeptide-40

Palmitoyl Tripeptide-8

Hydrolyzed Verbascum Thapsus Flower

Moringa Oleifera Seed Extract

Teprenone

Phospholipids

Hyaluronic Acid

Syringa Vulgaris Leaf Cell Culture Extract

Sphingolipids

Astaxanthin

Bisabolol

Euterpe Oleracea Fruit Oil

Rubus Idaeus Seed Oil

Honey

Ceramide NP

Phenyl T-Butylnitrone

Glutathione

Tetrahydrodiferuloylmethane

Tetrahydrodemethoxydiferuloylmethane

Tetrahydrobisdemethoxydiferuloylmethane

Ergothioneine

Sorbitan Olivate

Benzimidazole Diamond Amidoethyl Urea Carbamoyl Propyl Polymethylsilsesquioxane

Citric Acid

Acrylamide/Sodium Acryloyldimethyltaurate Copolymer

CI 77891

Isohexadecane

Maltodextrin

Polysorbate 80

Acetyl Tributyl Citrate

Tetrasodium EDTA

Sorbitan Oleate

Sodium Glycolate

O-Cymen-5-Ol

Water, Glycerin, Caprylic/Capric Triglyceride, Isononyl Isononanoate, Caffeine, C12-15 Alkyl Benzoate, Niacinamide, Lactobacillus Ferment, Cetearyl Olivate, Butylene Glycol, Polysorbate 60, Tetrahexyldecyl Ascorbate, Marrubium Vulgare Extract, Plantago Lanceolata Leaf Extract, Palmitoyl Tripeptide-5, Acetyl Tetrapeptide-40, Palmitoyl Tripeptide-8, Hydrolyzed Verbascum Thapsus Flower, Moringa Oleifera Seed Extract, Teprenone, Phospholipids, Hyaluronic Acid, Syringa Vulgaris Leaf Cell Culture Extract, Sphingolipids, Astaxanthin, Bisabolol, Euterpe Oleracea Fruit Oil, Rubus Idaeus Seed Oil, Honey, Dimethyl Isosorbide, Ceramide NP, Phenyl T-Butylnitrone, Tocopherol, Glutathione, Tetrahydrodiferuloylmethane, Tetrahydrodemethoxydiferuloylmethane, Tetrahydrobisdemethoxydiferuloylmethane, Ergothioneine, Xanthan Gum, Caprylyl Glycol, Carbomer, Sorbitan Olivate, Benzimidazole Diamond Amidoethyl Urea Carbamoyl Propyl Polymethylsilsesquioxane, Mica, Dextran, Citric Acid, Sodium Hydroxide, Acrylamide/Sodium Acryloyldimethyltaurate Copolymer, CI 77891, Ethylhexylglycerin, Isohexadecane, Maltodextrin, Polysorbate 80, Acetyl Tributyl Citrate, Tetrasodium EDTA, Sorbitan Oleate, Sodium Benzoate, Potassium Sorbate, Sodium Glycolate, Polysorbate 20, Phenoxyethanol, O-Cymen-5-Ol

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.

Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.

In practice, that translates to a long shelf life and a consistently elegant skin feel.

While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.

Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.

This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.

This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures at concentrations as low as 0.2%.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.

Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.

It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.

Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.

A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.

Dextran is a sugar (polysaccharide) with skin hydrating properties.

Fun fact: Louis Pasteur first discovered this ingredient as a microbial product in wine.

Dimethyl Isosorbide (often shortened to DMI) is a sugar-derived solvent made from sorbitol. It's used to dissolve tricky ingredients and help them mix smoothly into a formula.

Many actives sit as gritty crystals when undissolved, so DMI swoops in to full dissolve them. This helps improve texture, stability, and how evenly an active is distributed.

It does have a penetration-enhancing reputation that is a bit more nuanced than marketing suggests; a cell study on human skin found that 10% DMI didn't significantly boost the permeation of Hydroquinone, Salicylic Acid, or Octadecenedioic Acid compared to controls (though it did improve their solubility in the formula itself).

Typical usage concentrations usually range from 1-10% depending on the formula's needs; this ingredient is also well tolerated at these levels.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Mica is a naturally occurring mineral used to add shimmer and color in cosmetics. It can also help improve the texture of a product or give it an opaque, white/silver color.

Serecite is the name for very fine but ragged grains of mica.

This ingredient is often coated with metal oxides like titanium dioxide. Trace amounts of heavy metals may be found in mica, but these metals are not harmful in our personal products.

Mica has been used since prehistoric times throughout the world. Ancient Egyptian, Indian, Greek, Roman, Aztec, and Chinese civilizations have used mica.

Palmitoyl Tripeptide-5 is a synthetic signal lipopeptide. This just means it is a three amino acid chain bolted onto a palmitic acid tail so it can slip through the skin's lipid barrier.

This peptide has a "build more, lose less" approach.

It's designed to mimic the collagen-stimulating activity in your skin by copying a snippet of one of your skin's own matrix proteins. This nudges fibroblasts into making more collagen while inhibiting the enzyme that breaks down skin protein.

The manufacturer's in vivo study of 45 volunteers found 1% and 2.5% reduced the appearance of wrinkles by 7% and 12% respectively, after using it twice daily for 84 days.

This is in the expected range for peptides; they're slow and cumulative actives and not overnight fixers.

Typical use levels range from 1-3% and this ingredient gets along with pretty much everything.

On the fungal acne front: Although palmitic acid sits in the chain length that Malassezia can feed on, this ingredient has it locked in an amine bond. This makes it hard for Malassezia to access as a source of food, and therefore fungal acne safe.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Polysorbate 20 is a gentle, water-soluble emulsifier and mild surfactant. It stops oil and water from separating to keep your formulas blended and stable.

It also acts as a mild penetration enhancer by helping active ingredients absorb slightly better.

The common safety discussion around this ingredient involves a manufacturing byproduct called 1,4-dioxane.

Trace amounts can form during production but the EU's Scientific Committee on Consumer Safety has concluded that levels at/below 10 ppm in finished products are safe (commercial products consistently fall within acceptable margins).

True allergic reactions are uncommon and the CIR Expert Panel has confirmed this ingredient to be safe as used in cosmetics.

Because it is derived from lauric acid, it may not be fungal acne safe.

Potassium Sorbate is a preservative used to prevent yeast and mold in products. It is commonly found in both cosmetic and food products.

This ingredient comes from potassium salt derived from sorbic acid. Sorbic acid is a natural antibiotic and effective against fungus.

Both potassium sorbate and sorbic acid can be found in baked goods, cheeses, dried meats, dried fruit, ice cream, pickles, wine, yogurt, and more.

You'll often find this ingredient used with other preservatives.

Sodium Benzoate is a preservative. It's used in both cosmetic and food products to inhibit the growth of mold and bacteria. It is typically produced synthetically.

Both the US FDA and EU Health Committee have approved the use of sodium benzoate. In the US, levels of 0.1% (of the total product) are allowed.

Sodium benzoate works as a preservative by inhibiting the growth of bacteria inside of cells. It prevents the cell from fermenting a type of sugar using an enzyme called phosphofructokinase.

It is the salt of benzoic acid. Foods containing sodium benzoate include soda, salad dressings, condiments, fruit juices, wines, and snack foods.

Studies for using ascorbic acid and sodium benzoate in cosmetics are lacking, especially in skincare routines with multiple steps.

We always recommend speaking with a professional, such as a dermatologist, if you have any concerns.

Sodium Hydroxide is also known as lye or caustic soda. It is used to adjust the pH of products; many ingredients require a specific pH to be effective.

In small amounts, sodium hydroxide is considered safe to use. However, large amounts may cause chemical burns due to its high alkaline.

Your skin has a natural pH and acid mantle. This acid mantle helps prevent harmful bacteria from breaking through. The acid mantle also helps keep your skin hydrated.

"Alkaline" refers to a high pH level. A low pH level would be considered acidic.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons