Youth To The People Retinal + Niacinamide Youth Serum Versus Paula's Choice Resist Intensive Repair Cream

Youth To The People Retinal + Niacinamide Youth Serum Versus Paula's Choice Resist Intensive Repair Cream

This anti-aging serum is formulated around Niacinamide and Retinal to soften the look of wrinkles and refine skin texture.

This anti-aging moisturizer is formulated around Retinol and Simmondsia Chinensis Seed Oil to soften the look of wrinkles and hydrate skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Butylene Glycol

Triethylhexanoin

Niacinamide

Squalane

Cyclodextrin

Glycerin

Hydrogenated Lecithin

Polyglyceryl-10 Myristate

Grifola Frondosa Fruiting Body Extract

Rubus Chamaemorus Seed Oil

Arginine

Retinal

Withania Somnifera Root Extract

Helianthus Annuus Seed Oil

Hordeum Vulgare Extract

Ganoderma Lucidum Stem Extract

Sodium Hyaluronate Crosspolymer

Cucumis Sativus Seed Oil

Lonicera Japonica Flower Extract

Ceramide NP

Ceramide AP

Phytosphingosine

Cholesterol

Lentinus Edodes Mycelium Extract

Lonicera Caprifolium Flower Extract

Butyrospermum Parkii Oil

Ceramide EOP

Sodium Lauroyl Lactylate

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Capryloyl Glycerin/Sebacic Acid Copolymer

Xanthan Gum

Tocopherol

Carbomer

Hydrolyzed Glycosaminoglycans

Sodium Hyaluronate

Hyaluronic Acid

Pentylene Glycol

Hydrolyzed Sodium Hyaluronate

Diheptyl Succinate

Phenoxyethanol

Ethylhexylglycerin

Phytosterols

Propanediol

Benzyl Glycol

Raspberry Ketone

Water, Butylene Glycol, Triethylhexanoin, Niacinamide, Squalane, Cyclodextrin, Glycerin, Hydrogenated Lecithin, Polyglyceryl-10 Myristate, Grifola Frondosa Fruiting Body Extract, Rubus Chamaemorus Seed Oil, Arginine, Retinal, Withania Somnifera Root Extract, Helianthus Annuus Seed Oil, Hordeum Vulgare Extract, Ganoderma Lucidum Stem Extract, Sodium Hyaluronate Crosspolymer, Cucumis Sativus Seed Oil, Lonicera Japonica Flower Extract, Ceramide NP, Ceramide AP, Phytosphingosine, Cholesterol, Lentinus Edodes Mycelium Extract, Lonicera Caprifolium Flower Extract, Butyrospermum Parkii Oil, Ceramide EOP, Sodium Lauroyl Lactylate, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Capryloyl Glycerin/Sebacic Acid Copolymer, Xanthan Gum, Tocopherol, Carbomer, Hydrolyzed Glycosaminoglycans, Sodium Hyaluronate, Hyaluronic Acid, Pentylene Glycol, Hydrolyzed Sodium Hyaluronate, Diheptyl Succinate, Phenoxyethanol, Ethylhexylglycerin, Phytosterols, Propanediol, Benzyl Glycol, Raspberry Ketone

Ethylhexyl Stearate

Simmondsia Chinensis Seed Oil

Caprylic/Capric Triglyceride

Petrolatum

Cetearyl Alcohol

Dimethicone

Dipentaerythrityl Hexacaprylate/Hexacaprate

Glyceryl Stearate

Tridecyl Trimellitate

PEG-100 Stearate

Phenyl Trimethicone

Retinol

Adenosine

Palmitoyl Tetrapeptide-7

Palmitoyl Hexapeptide-12

Palmitoyl Tripeptide-1

Ceramide Ng

Magnesium Ascorbyl Phosphate

Lecithin

Linoleic Acid

Linolenic Acid

Retinyl Palmitate

Glycyrrhiza Glabra Root Extract

Camellia Oleifera Leaf Extract

Citrullus Lanatus Fruit Extract

Lens Esculenta Fruit Extract

Pyrus Malus Fruit Extract

Glycine Soja Sterols

Tribehenin

PEG-10 Phytosterol

Magnesium Aluminum Silicate

Sodium PCA

Sodium Lactate

Pullulan

Sodium Hydroxide

Neopentyl Glycol Dicaprylate/Dicaprate

Cetearyl Glucoside

Tridecyl Stearate

Behenyl Alcohol

Sclerotium Gum

C12-15 Alkyl Benzoate

Polysorbate 20

Disodium EDTA

Sorbic Acid

Chlorphenesin

Benzoic Acid

Water, Ethylhexyl Stearate, Simmondsia Chinensis Seed Oil, Butylene Glycol, Glycerin, Caprylic/Capric Triglyceride, Petrolatum, Cetearyl Alcohol, Dimethicone, Dipentaerythrityl Hexacaprylate/Hexacaprate, Glyceryl Stearate, Tridecyl Trimellitate, PEG-100 Stearate, Phenyl Trimethicone, Retinol, Adenosine, Palmitoyl Tetrapeptide-7, Palmitoyl Hexapeptide-12, Palmitoyl Tripeptide-1, Ceramide Ng, Sodium Hyaluronate, Magnesium Ascorbyl Phosphate, Niacinamide, Tocopherol, Lecithin, Linoleic Acid, Linolenic Acid, Retinyl Palmitate, Glycyrrhiza Glabra Root Extract, Camellia Oleifera Leaf Extract, Citrullus Lanatus Fruit Extract, Lens Esculenta Fruit Extract, Pyrus Malus Fruit Extract, Glycine Soja Sterols, Tribehenin, PEG-10 Phytosterol, Magnesium Aluminum Silicate, Sodium PCA, Sodium Lactate, Pullulan, Xanthan Gum, Sodium Hydroxide, Neopentyl Glycol Dicaprylate/Dicaprate, Cetearyl Glucoside, Tridecyl Stearate, Behenyl Alcohol, Sclerotium Gum, Carbomer, C12-15 Alkyl Benzoate, Polysorbate 20, Disodium EDTA, Sorbic Acid, Phenoxyethanol, Chlorphenesin, Benzoic Acid

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Carbomer is a synthetic thickening and gelling agent. It's basically the ingredient that gives a lot of serums, gels, creams, and sunscreens their smooth, non-sticky texture.

Although legally permitted at very high levels, carbomers are normally used at concentrations below 1%.

It also needs to be neutralized to actually thicken, and because it is a large molecule, it doesn't really penetrate the skin barrier.

Allergy-wise, the risk is very low. Clinical studies show carbomers have low potential for skin irritation/sensitization even at concentrations up to 100%.

A 2024 UK study patch-tested 1,302 patients and found true allergy to the parent group of carbomer to be rare with no confirmed relevant reactions.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Niacinamide is a multitasking form of vitamin B3 that strengthens the skin barrier, reduces pores and dark spots, regulates oil, and improves signs of aging.

And the best part? It's gentle and well-tolerated by most skin types, including sensitive and reactive skin.

You might have heard of "niacin flush", or the reddening of skin that causes itchiness. Niacinamide has not been found to cause this.

In very rare cases, some individuals may not be able to tolerate niacinamide at all or experience an allergic reaction to it.

If you are experiencing flaking, irritation, and dryness with this ingredient, be sure to double check all your products as this ingredient can be found in all categories of skincare.

When incorporating niacinamide into your routine, look out for concentration amounts. Typically, 5% niacinamide provides benefits such as fading dark spots. However, if you have sensitive skin, it is better to begin with a smaller concentration.

When you apply niacinamide to your skin, your body converts it into nicotinamide adenine dinucleotide (NAD). NAD is an essential coenzyme that is already found in your cells as "fuel" and powers countless biological processes.

In your skin, NAD helps repair cell damage, produce new healthy cells, support collagen production, strengthen the skin barrier, and fight environmental stressors (like UV and pollution).

Our natural NAD levels start to decline with age, leading to slower skin repair, visible aging, and a weaker skin barrier. By providing your skin niacinamide, you're recharging your skin's NAD levels. This leads to stronger, healthier, and younger looking skin.

Another name for vitamin B3 is nicotinamide. This vitamin is water-soluble and our bodies don't store it. We obtain Vitamin B3 from either food or skincare. Meat, fish, wheat, yeast, and leafy greens contain vitamin B3.

The type of niacinamide used in skincare is synthetically created.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons