Peptide Skincare & BeautySkin science and ingredient guides

Skin science article

The Ordinary Mandelic Acid 10% + HA Versus Niod Copper Amino Isolate Serum 3 1:1 (CAIS3)

The Ordinary Mandelic Acid 10% + HA Versus Niod Copper Amino Isolate Serum 3 1:1 (CAIS3) This smoothing serum is formulated around Mandelic Acid and Sodium Hyaluronate Crosspolymer to refine skin texture and brighten dull-looking skin. This anti-aging serum is

By Peptide Skincare & Beauty Editorial TeamPublished

The Ordinary Mandelic Acid 10% + HA Versus Niod Copper Amino Isolate Serum 3 1:1 (CAIS3)

This smoothing serum is formulated around Mandelic Acid and Sodium Hyaluronate Crosspolymer to refine skin texture and brighten dull-looking skin.

This anti-aging serum is formulated around Tripeptide-29 and Tripeptide-1 to soften the look of wrinkles.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Propanediol

Water

Mandelic Acid

Glycerin

Dimethyl Isosorbide

Sodium Hyaluronate Crosspolymer

Tasmannia Lanceolata Fruit/Leaf Extract

Pentylene Glycol

Polysorbate 20

Sodium Hydroxide

Ethylhexylglycerin

1,2-Hexanediol

Caprylyl Glycol

Propanediol, Water, Mandelic Acid, Glycerin, Dimethyl Isosorbide, Sodium Hyaluronate Crosspolymer, Tasmannia Lanceolata Fruit/Leaf Extract, Pentylene Glycol, Polysorbate 20, Sodium Hydroxide, Ethylhexylglycerin, 1,2-Hexanediol, Caprylyl Glycol

Tripeptide-29

Bis(Tripeptide-1) Copper Acetate

Tripeptide-1

Myristoyl Nonapeptide-3

Trifluoroacetyl Tripeptide-2

Acetyl Tetrapeptide-2

Glycogen

Dextran

Ethoxydiglycol

Isoceteth-20

Leuconostoc/Radish Root Ferment Filtrate

Phenoxyethanol

Chlorphenesin

Water, Glycerin, Tripeptide-29, Bis(Tripeptide-1) Copper Acetate, Tripeptide-1, Myristoyl Nonapeptide-3, Trifluoroacetyl Tripeptide-2, Acetyl Tetrapeptide-2, Sodium Hyaluronate Crosspolymer, Glycogen, Propanediol, Pentylene Glycol, Dextran, Dimethyl Isosorbide, Ethoxydiglycol, Isoceteth-20, Leuconostoc/Radish Root Ferment Filtrate, Caprylyl Glycol, Ethylhexylglycerin, Phenoxyethanol, Chlorphenesin

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Caprylyl Glycol is a humectant, skin conditioner, emollient, and preservative booster derived from either caprylic acid or synthetically created.

Typical use levels vary from 0.3-1% as a preservative booster and go up to 2% to condition skin.

Because it is not a free-fatty acid, this ingredient is fungal acne safe (there's nothing for Malassezia to feed on).

Dimethyl Isosorbide (often shortened to DMI) is a sugar-derived solvent made from sorbitol. It's used to dissolve tricky ingredients and help them mix smoothly into a formula.

Many actives sit as gritty crystals when undissolved, so DMI swoops in to full dissolve them. This helps improve texture, stability, and how evenly an active is distributed.

It does have a penetration-enhancing reputation that is a bit more nuanced than marketing suggests; a cell study on human skin found that 10% DMI didn't significantly boost the permeation of Hydroquinone, Salicylic Acid, or Octadecenedioic Acid compared to controls (though it did improve their solubility in the formula itself).

Typical usage concentrations usually range from 1-10% depending on the formula's needs; this ingredient is also well tolerated at these levels.

Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:

The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure to patch test if you are unsure.

Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

Pentylene Glycol (1,2-pentanediol) is a multitasking little diol with three main roles in a formula:

Research on alkanediols (the family pentylene glycol belongs to) show they work by disrupting microbial cell membranes. This disruption helps the primary preservative system in a product work more effectively at lower doses.

On the safety side, the Cosmetic Ingredient Review Expert Panel has concluded this ingredient to be safe as used in current cosmetic practices + concentrations.

Typical use levels in a formula run about 1-5%.

Propanediol is an all-star ingredient. It softens, hydrates, and smooths the skin.

It’s often used to:

Propanediol is not likely to cause sensitivity and considered safe to use. It is derived from corn or petroleum with a clear color and no scent.

Sodium Hyaluronate Crosspolymer is a crosslinked version of sodium hyaluronate. This just means it's linked into a 3D mesh network that lets it be more stable and sit on skin as a cohesive, gel-like film rather than sinking into skin.

A 2016 human skin study found crosslinked HA increased epidermal water content by 7.6% over the control group and reduced transepidermal water loss by 27.8%.

A follow-up clinical trial found that a topical crosslinked HA serum applied after fillers, microneedling, or chemical peels was well-tolerated and enhanced skin quality at 14 / 28 days.

More recent research suggests that concentrations as low as 0.03% can act as a penetration enhancer for other skincare actives.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

The reference edit

Ingredients, questions
& further reading.

Connected source records selected through this article’s public topic index.

01

Formula cabinet

Ingredients & structured notes

Ingredient index

Ingredients Explained

  1. 01These ingredients are found in both products.
  2. 02Ingredients higher up in an ingredient list are typically present in a larger amount.
  3. 03Ethylhexylglycerin is created from glycerin. It is a multitasker ingredient that:
  4. 04The CIR Expert Panel found minimal skin absorption or sensitization of any kind in a safety assessment. Though this ingredient is considered well-tolerated, a small number of cases of allergic dermatitis have been published since 2002. Just be sure …
  5. 05Industry-reported use ranges from 8% in rinse-off products and 2% in leave-on formulations.
  6. 06Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.
  7. 07Topically, glycerin does several things at once:
  8. 08Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.
  9. 09Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.
  10. 10This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.
  11. 11Just know very high concentrations (>40%) can feel tacky in low humidity.
  12. 12Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.
  13. 13Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).
  14. 14It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.
  15. 15On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.
  16. 16Another perk of this ingredient is that it stays functional across a wide pH range (3-10).
  17. 17You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.
  18. 18Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.
  19. 19Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.
  20. 20Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.
Source · skinsort.com ⟶
02

Product index

Related product references

03

Comparison edit

Read side by side

Continue reading

Related articles